6) Designing an 8-state FSM requires: (a) At least 8 Flip-Flops (b) At most 3 Flip-Flops (c) 3 Flip-Flops (d) 8 Flip-Flops 7) Carry select adder is faster than carry-look ahead because: (a) Carry select adder computes two high order sums in parallel (b) Carry select adder computes low order sums in parallel (c) Carry select adder computes two high order overflows in series 8) An 8:1 multiplexer can implement any function of (a) Three variables (b) Four variables (c) Five variables 9) 10) Connecting four NMOS in series is: (Assume Rp=2Rn ) (a) Faster than two PMOS transistors connected in parallel (a) Slower than two PMOS transistors connected in parallel (a) Faster than two PMOS transistors connected in series (a) Slower than two PMOS transistors connected in series 10) The likelihood of Metastability can be improved the best by: (a) Inserting one synchronizer Flip-Flop with low setup/hold time (b) Inserting one synchronizer Flip-Flop with very low setup/hold time (c) Inserting a couple of synchronizer FFs with low and very low setup/hold time (d) Inserting a couple of synchronizer FFs with low and very low setup/hold time and doubling the system clock speed
Answers
6) (c) 3 Flip-Flops
7) (a) Carry select adder computes two high order sums in parallel
8) (b) Four variables
9) (b) Slower than two PMOS transistors connected in parallel
10) (c) Inserting a couple of synchronizer FFs with low and very low setup/hold time
In question 6, designing an 8-state FSM (Finite State Machine) requires at least 8 Flip-Flops, as each state requires a dedicated Flip-Flop to store its value.
In question 7, a carry select adder is faster than carry-look ahead because it computes two high order sums in parallel, reducing the overall computation time.
In question 8, an 8:1 multiplexer can implement any function of four variables, as it has 8 input lines which can be used to represent all possible combinations of the four variables.
In question 9, connecting four NMOS transistors in series is slower than two PMOS transistors connected in parallel, as NMOS transistors have higher resistance compared to PMOS transistors.
In question 10, the likelihood of metastability can be improved the best by inserting a couple of synchronizer Flip-Flops with low and very low setup/hold time, as it helps in reducing the chances of metastability occurring during data transfer.
learn more about "computes ":- https://brainly.com/question/24540334
#SPJ11
Related Questions
Discuss what is an ore.
Answers
Answer:
a naturally occurring solid material from which a metal or valuable mineral can be profitably extracted.
Explanation:
yw
Answer:
Ore is an accumulation of any mineral mixed with other elements. The mineral content of an ore must be in sufficient concentration to make its extraction commercially and economically viable.
Hope it helps.
If you have any query, feel free to ask.
inlet and outlet vane angle of turbine
Answers
The vane angle βs determines the fluid flow direction in an impeller (also see Vane, Vane cascade). On centrifugal pumps it is defined as the angle between the chord c and the circumferential direction u (see Vane cascade).
A rigid container is partly filled with a liquid at 1520 kPa. The volume of the liquid is 1.232 litres. At a pressure
of 3039 kPa, the volume of the liquid is 1.231 litres.
a. Calculate the average bulk modulus of elasticity of the liquid
Answers
Answer:
Bulk modulus: ß = - ∆p/(∆V/V)
∆p = (3039 - 1520)x10³ = 1519 kPa
∆V = 1231 - 1232 = -1 m³
V = 1232 m³
ß = - 1519/(-1/1232) = 1.87x10^6 kPa = 1.87 GPa
Explanation:
a.The average bulk modulus of elasticity of the liquid is 1.87 GPa
b. Coefficient of compressibility 0.5437 GPa-¹
c Velocity of sound 1.87 x 10^9P
a. Bulk modulus of elasticity
ß = - ∆p/(∆V/V)
First step is to determine ∆p
∆p = (3039 kpa - 1520 kpa)x10³
∆p = 1519 kPa
Second step is to determine ∆V
∆V = 1231 litres - 1232 litres
∆V = -1 m³
Now let determine the Bulk modulus of elasticity
Bulk modulus of elasticity= - 1519/(-1/1232)
Bulk modulus of elasticity= 1.87x10^6 kPa
Bulk modulus of elasticity= 1.87 GPa
b. The coefficient of compressibility
Coefficient of compressibility=β =1/K
Coefficient of compressibility=β =1/1.87
β =0.5437 GPa-¹
C. Velocity of sounds in the medium with a density of 1593 kg/m3
V=√K/ρ
V=√1.87×10^9/ 1593
V=1083m/s
V = 1.87 x 10^9P
Inconclusion:
a.The average bulk modulus of elasticity of the liquid is 1.87 GPa
b. Coefficient of compressibility 0.5437 GPa-¹
c Velocity of sound 1.87 x 10^9P
Learn more here:
https://brainly.com/question/16393481
IV. An annealed copper strip 9 inches wide and 2.2 inches thick, is rolled to its maximum possible draft in one pass. The following properties of annealed copper are given: strength coefficient is 90,000 psi; true strain at the onset of non-uniform deformation is 0.45; and, engineering strain at yield is 0.11. The coefficient of friction between strip and roll is 0.2. The roll radius is 14inches and the rolls rotate at 150 rpm. Calculate the roll-strip contact length. Calculate the absolute value of thetrue strain that the strip undergoes in this operation. Determine the average true stress of the strip in theroll gap. Calculate the roll force. Calculate the horsepower required.
Answers
Answer:
13.9357 horse power
Explanation:
Annealed copper
Given :
Width, b = 9 inches
Thickness, \($h_0=2.2$\) inches
K= 90,000 Psi
μ = 0.2, R = 14 inches, N = 150 rpm
For the maximum possible draft in one pass,
\($\Delta h = H_0-h_f=\mu^2R$\)
\($=0.2^2 \times 14 = 0.56$\) inches
\($h_f = 2.2 - 0.56$\)
= 1.64 inches
Roll strip contact length (L) = \($\sqrt{R(h_0-h_f)}$\)
\($=\sqrt{14 \times 0.56}$\)
= 2.8 inches
Absolute value of true strain, \($\epsilon_T$\)
\($\epsilon_T=\ln \left(\frac{2.2}{1.64}\right) = 0.2937$\)
Average true stress, \($\overline{\gamma}=\frac{K\sum_f}{1+n}= 31305.56$\) Psi
Roll force, \($L \times b \times \overline{\gamma} = 2.8 \times 9 \times 31305.56$\)
= 788,900 lb
For SI units,
Power = \($\frac{2 \pi FLN}{60}$\)
\($=\frac{2 \pi 788900\times 2.8\times 150}{60\times 44.25\times 12}$\)
= 10399.81168 W
Horse power = 13.9357
what is the division of demand
Answers
for (var i = 0; i < array.length; i++) {
commands involving array[i]
}
Identify the general structure for accessing each value from an array using a for loop.
Answers
To access each value from an array using a for loop, the general structure is as follows:
for (var i = 0; i < array.length; i++) {
// commands involving array[i]
}
How can you iterate through an array using a for loop?When accessing each value from an array using a for loop, the general structure involves initializing a variable (`i`) to 0, setting the loop condition to iterate until `i` is less than the length of the array, and incrementing `i` by one in each iteration. Inside the loop, the individual array elements can be accessed using the index `i`.
This structure allows you to perform commands involving `array[i]` within the loop, where `array` is the name of the array you want to iterate over. By using `array[i]`, you can access and work with each element of the array during each iteration of the loop.
Learn more about loop
brainly.com/question/14390367
#SPJ11
What do organizations install to detect and stop cyberattack threats at the point of attack? a) biometric technologies Oь) spyware malware detection software c) disaster recovery plans d) backup protocols Question 50 (1.67 points) is a large set of nottraditional data that may be used to gain meaningful business insights or predict significant business events a) Business Intelligence b) Hot data c) Big data d) A virtual sandbox
Answers
Organizations install spyware malware detection software to detect and stop cyberattack threats at the point of attack.
To detect and stop cyberattack threats at the point of attack, organizations often install spyware malware detection software. This type of software is specifically designed to identify and remove any malicious software that may be attempting to infiltrate a company's network. By using this technology, organizations can quickly respond to cyber threats and prevent them from causing any damage to their systems or data. Additionally, implementing disaster recovery plans and backup protocols can help organizations quickly recover from any attacks that do occur. As for the second question, the large set of non-traditional data that may be used to gain meaningful business insights or predict significant business events is called big data.
Know more about spyware malware here:
https://brainly.com/question/28910959
#SPJ11
If the housing for this plant have ground, 1st and 2nd floor, and distance
between each floor is about 8 m, and the estimated area per floor is 150 m x 75m. apply NFPA 10 to determine the minimum number of portable fire
extinguishers for the plant. Assume no class B fuel in the plant. Use 6 kg Dry Chemical
for calculations.
Answers
Answer:
To determine the minimum number of portable fire extinguishers required for the plant, we need to follow the guidelines set out by NFPA 10.
Step 1: Determine the floor area of the plant
The estimated floor area per floor is 150m x 75m = 11,250 m²
Therefore, the total floor area of the plant is 3 x 11,250 m² = 33,750 m²
Step 2: Determine the maximum travel distance to an extinguisher
According to NFPA 10, the maximum travel distance to an extinguisher should not exceed 30 meters. Since the distance between each floor is about 8 meters, we need to place fire extinguishers on each floor.
Step 3: Determine the minimum number of extinguishers required
We need to calculate the minimum number of extinguishers required for each floor, using the formula:
Minimum number of extinguishers = (Floor area / Maximum travel distance to an extinguisher) x (1/75% of floor area covered by an extinguisher)
For the 1st and 2nd floors, the minimum number of extinguishers required is:
Minimum number of extinguishers = (11,250 m² / 30 m) x (1/75%) = 150 x 1.33 = 200
Therefore, we need a total of 200 extinguishers for each of the 1st and 2nd floors.
For the ground floor, we need to add an extra 10% of extinguishers for protection of high hazard areas, such as those containing electrical equipment. Therefore, the minimum number of extinguishers required for the ground floor is:
Minimum number of extinguishers = (11,250 m² / 30 m) x (1/75%) x 1.1 = 165 x 1.33 x 1.1 = 246
Therefore, we need a total of 246 extinguishers for the ground floor.
Overall, we need a total of 200 + 200 + 246 = 646 portable fire extinguishers for the plant
An organization sets its standards for quality according to the best product it can produce.
True
False
Answers
Answer:
True!! took the test
Explanation:
Rate of energy loss through a 1.5 square meter window with the worst R-value (0.9) is 936.7 Btu/hour. Rate of energy loss through the best R-value (11.1) is 75.95 Btu/hour. How much do you save if all 18 windows in a house are the highest R- value, relative to the lowest R-value windows, over the course of a 4-month winter year?
Answers
The rate of energy loss through a 1.5 square meter window with the worst R-value (0.9) is 936.7 Btu/hour and the rate of energy loss through the best R-value (11.1) is 75.95 Btu/hour. In order to calculate how much can be saved by replacing all the windows with the highest R-value, relative to the lowest R-value windows, we need to consider the energy loss of all the windows.
We have 18 windows in the house, therefore the amount of energy lost with the lowest R-value windows will be:18 * 936.7 = 16,860.6 Btu/hourOn the other hand, the amount of energy lost with the highest R-value windows will be:18 * 75.95 = 1,367.1 Btu/hour The difference between the two will be the amount of energy that will be saved if we use the highest R-value windows:16,860.6 - 1,367.1 = 15,493.5 Btu/hourNow, we need to consider the duration of the winter, which is 4 months or 120 days, assuming that the house is heated for the entire duration of winter. Therefore, the total amount of energy that can be saved in 4 months or 120 days will be:15,493.5 * 120 = 1,859,220 Btu (rounded off to the nearest whole number).This means that we can save 1,859,220 Btu of energy if we replace all the windows with the highest R-value, relative to the lowest R-value windows over the course of a 4-month winter year.
To know more about window, visit:
https://brainly.com/question/28193153
#SPJ11
please I need dhelp asap
What is the shape of an airplane wing called?
air raid
airport
airfoil
Answers
Answer:
the answer is airfoil
Explanation:
hope the answer helps
Answer:
It is called the airfoil
Explanation:
The answer is D. ( airfoil) because an airport is a place. Air raid is a attack in the air and that only leaves airfoil, so airfoil is the correct answer.(Hoped that helped)
Nitrogen is a compressed in a polytropic process with n=1.4 from 120 kpa and 10 degrees celsius ti 800 kpa in a piston cylinder device. Nitrogen is assumed to be an ideal gas. Gas cinstant and specific heats of nitrigen can be found from table A-2
what is the work produced per unit mass of N2
what is the heat transferred per unit mass of N2
Answers
The work produced per unit mass of N2 is -54.55 kJ/kg.
The heat transferred per unit mass of N2 is 473.3048 kJ/kg.
How to find the work produced and heat transferred per unit mass of N2?To solve this problem, we need to use the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.
We can assume that the nitrogen gas behaves as an ideal gas, so we can use the ideal gas law to relate pressure, volume, and temperature:
PV = mRT
where P is the pressure, V is the volume, m is the mass, R is the gas constant, and T is the temperature.
Using table A-2, we can find the gas constant and specific heats of nitrogen:
R = 0.2968 kJ/kg-K
\(C_p\) = 1.039 kJ/kg-K
\(C_v\) = 0.743 kJ/kg-K
To solve for the work done by the system, we can use the following equation for a polytropic process:
\(W = (P_2V{_2 - P_1V_1) / (n - 1)\)
where n is the polytropic index, which is given as 1.4 in this problem.
To solve for the heat added to the system, we can use the equation:
Q = ΔU + W
where ΔU is the change in internal energy, which can be expressed as:
ΔU = m\(C_v\)ΔT
where ΔT is the change in temperature.
Now we can plug in the values and solve for the work and heat:
Given:
\(P_1\) = 120 kPa
\(T_1\) = 10 °C = 283.15 K
\(P_2\) = 800 kPa
n = 1.4
First, we need to calculate the volume at the initial state (state 1) using the ideal gas law:
\(V_1 = mRT_1 / P_1 = (1 kg)(0.2968 kJ/kg-K)(283.15 K) / (120 kPa) = 0.6252 m^3/kg\)
Next, we can calculate the volume at the final state (state 2) using the polytropic process equation:
\(V_2 = V_1 (P_1 / P_2)^{(1/n)} = 0.6252 m^3/kg (120 kPa / 800 kPa)^{(1/1.4)} = 0.2739 m^3/kg\)
Now we can solve for the work done by the system:
\(W = (P_2V_2 - P_1V_1) / (n - 1) = (800 kPa)(0.2739 m^3/kg) - (120 kPa)(0.6252 m^3/kg) / (1.4 - 1) = -54.55 kJ/kg\)
Note that the negative sign indicates that work is done on the system (i.e., the piston cylinder device is compressed).
Finally, we can solve for the heat added to the system:
Q = ΔU + W = m\(C_v\)ΔT - W
We need to find the change in temperature, which can be expressed as:
\(\del T= T_2 - T_1 = (P_2V_2 / mR) - (P_1V_1 / mR) = (800 kPa)(0.2739 m^3/kg) / (1 kg)(0.2968 kJ/kg-K) - (120 kPa)(0.6252 m^3/kg) / (1 kg)(0.2968 kJ/kg-K) = 563.6 K\)
Now we can plug the values and solve for heat :
m=14kg
\(C_v\) = 0.743 kJ/kg-K
ΔT= 563.6K
W= -54.55 kJ/kg
Q = ΔU + W = m\(C_v\)ΔT - W=(1kg)(0.743 kJ/kg-K)(563.6K)-(-54.55 kJ/kg)= 473.3048 kJ/kg
Learn more about the application of the First Law of Thermodynamics
brainly.com/question/3808473
#SPJ11
Anybody know anything?
Answers
Answer:
1. Be sure to use the correct type and size of screwdriver on every kind of screw to avoid injury to yourself or damage to equipment.
2. It is also unsafe to carry screwdrivers in pockets or to use them around moving machinery.
3. Screwdrivers are not safe to use as hammers or chisels or for prying.
Explanation:
Write a program to play the Card Guessing Game. Your program must give the user the following choices: - Guess only the face value of the card. - Guess only the suit of the card. - Guess both the face value and the suit of the card. Before the start of the game, create a deck of cards. Before each guess, use the function random_shuffle to randomly shuffle the deck.
Answers
how am I going to do this, I have a friend that might be able to help I will check
Give me three types of control systems
Answers
1. Open-loop control system: In this type of system, the control action is determined solely by the input signal. The output of the system is not compared to the desired output or reference signal. An example of an open-loop control system is a washing machine with a timer that runs for a fixed duration regardless of the state of the clothes inside.
2. Closed-loop or feedback control system: In this type of system, the output of the system is measured and compared to the desired output, and the control action is adjusted accordingly. This type of system uses feedback to continuously adjust the output to match the desired value. An example of a feedback control system is a thermostat that measures the temperature of a room and adjusts the heating or cooling system to maintain a desired temperature.
3. Digital control system: In this type of system, the control variables are processed digitally. The input and output signals are sampled and converted to digital signals, and then the control algorithm is executed using digital processing techniques. This type of system is commonly used in modern industrial control systems and robotics.
(1) output control,
(2) behavioral control, and
(3) clan control.
The space between two square flat parallel plate is filled with oil. Each side of
the plate is 600mm. The thickness of the oil films is 12.5mm. The upper
plate, which moves at 2.5m /s, requires a force of 98.1 N to maintain the
speed. Determine
I.The dynamic viscosity of the oil in poise.
Ii.The kinematic viscosity of the oil in strokes if the specific gravity of the oil
is 0.95
Answers
The dynamic viscosity of the oil in poise is 13.625 pois
The kinematic viscosity of the oil in strokes is 14.34
How to solve for the dynamic viscosityF viscous is given as n* ΔFr / Δy
where n = F * Δy / A * ΔVn
We have to define the terms of the formula
Δy = 12.5 x 10⁻³
ΔVr = 2.5m /s
A = 60 x 60 cm² = 0.36m
F = 98.1 n
We have to put the values in the formula
98.1 n * 12.5 x 10⁻³ / 0.36m * 2.5m /s
n = 1.3625 ns / m²
The kinematic viscosity of the oil in strokes if the specific gravity of the oil is 0.95
y = n / e
n = 1.3625
e = 0.95 x 10³
y = 1.3625 / 0.95 x 10³
= 1.434 x 10⁻³
Read more on dynamic viscosity here: https://brainly.com/question/13087865
#SPJ1
innovative ideas for civil engineering individual project? I'm running out of time. Need to submit and get approval for this. Please help me and give me a new title to research.
For an egsample- Investigation of replacing Ricehusk instead of Sand in C30, Like wise
Answers
Answer:
Top Final year projects for civil engineering students
• Geographic Information System using Q-GIS. ...
• Structural and Foundation Analysis. ...
• Construction Project Management & Building Information Modeling. ...
• Tall Building Design. ...
• Seismic Design using SAP2000 & ETABS.
Explanation:
Hope it's help
In a vehicle with front disc brakes, the vehicle pulls to the left when braking. What causes this?
A. Seized left brake caliper piston
B. Collapsed left brake line hose
Answers
The blue and white “Alfa” flag signifies what?
A) A tow boat is towing another vessel to safety
B) A ski boat that has a participant in the water
C) A dive boat that is restricted in its ability to maneuver
D) A Coast Guard boat that is on patrol
Answers
The blue and white "Alfa" flag signifies: C. a dive boat that is restricted in its ability to maneuver.
What is a dive boat?A dive boat can be defined as a type of boat that is commonly used by scuba divers or recreational divers to reach a deep dive site which cannot be conveniently accomplished by swimming from the bank or sea shore.
As a safety precaution, the blue and white "Alfa" flag is designed and developed to signify a dive boat that is restricted in its ability to maneuver.
Read more on dive boat here: https://brainly.com/question/23462572
#SPJ2
These agents function by binding divalent cations. EDTA binds both Mg2+ and Ca2+ tightly while EGTA has a greater specificity for Ca2+. (Both will bind a number of other divalent cations as well.) However, cation binding is pH-dependent. In making a solution of EDTA, it is often suggested that the pH of the solution be adjusted to around 8. The pKas of the four acetic acid groups on EDTA are 2.0, 2.67, 6.16 and 10.26. At pH = 8.0, what is the predominant ionic species of EDTA?
Answers
At pH = 8.0, the predominant ionic species of EDTA would be the diprotic species, H2EDTA^2-.
This is because the pH of 8.0 is above the pKa of the first two acetic acid groups (2.0 and 2.67), meaning that they will be mostly protonated and therefore not ionized. However, the pH is below the pKa of the third and fourth acetic acid groups (6.16 and 10.26), meaning that they will be mostly deprotonated and therefore ionized.
So, at pH = 8.0, the EDTA molecule will have two deprotonated acetic acid groups, and thus will exist predominantly as the diprotic species H2EDTA^2-. This species can effectively chelate and bind divalent cations, such as Mg2+ and Ca2+.
Learn more about properties and behavior of EDTA :https://brainly.com/question/4304901
#SPJ4
Off the southern coast of Andorra in the Mediterranean Sea lies the island of Duosomata (pronounced DOO-oh-so-MAH-ta). It is populated exclusively by short people and tall people. No people of average height live on the island. We can use the following predicates to say things about the people of Duosomata.
person(x)
≡
x is a person.
short(x)
≡
Person x is short.
tall(x)
≡
Person x is tall.
taller(x, y)
≡
Person x is taller than person y.
Answer the following questions by writing expressions in predicate calculus that use these predicates. Assume that quantified variables range over all possible objects, not just people, and not just people from Duosomata.
1a. (5 points.) Write an expression that means ‘‘If there are any two people, and the first person is taller than the second person, then the first person is tall, and the second person is short.’’
1b. (5 points.) Write an expression that means ‘‘At least one tall person is taller than any short person.’’
1c. (10 points.) Suppose that this is true:
¬ ∃s ∃t [person(s) ∧ person(t) ∧ short(s) ∧ tall(t) ∧ taller(s, t)]
Then prove that this is true:
∀s ∀t [(person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t)]
Your proof must be written as a series of steps. Each step must be an expression in predicate calculus. You must give a reason for each step.
Answers
1a. (∀x)(∀y)((person(x) ∧ person(y) ∧ taller(x, y)) → (tall(x) ∧ short(y)))
1b. (∃x)(tall(x) ∧ (∀y)(short(y) → taller(x, y)))
How can we show the proof?1c.
Proof:
Step 1:
Assume (person(s) ∧ person(t) ∧ short(s) ∧ tall(t))
Step 2:
From Step 1, we know that (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) is true.
Step 3:
Assume ¬ taller(s, t) is false, i.e. taller(s, t) is true.
Step 4:
From Step 3, taller(s, t) is true, which contradicts the assumption in (1c) that ¬ ∃s ∃t [person(s) ∧ person(t) ∧ short(s) ∧ tall(t) ∧ taller(s, t)].
Step 5:
From Step 4, it follows that ¬ taller(s, t) must be true, i.e. (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t) is true.
Step 6:
Since Step 5 holds for any s and t that satisfy (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)), it follows that
(∀s)(∀t)((person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t)) is true.
Hence, the proof is complete.
learn more about proof: https://brainly.com/question/29969150
#SPJ1
What energy transformation takes place when you turn on a light
Answers
Answer:
From electrical energy to radiation
Explanation:
A light bulb converts electrical energy to light, which is nothing more than radiation. Don't regard radiation as a bad thing, this light is non-iodizing radiation, which does not have the possibility to alter our DNA, and thus it's safe.
The simplest example can be found in old lights (obsolete now because they are vastly inefficient). This lights were just resistors which turned electrical energy into heat. A very hot material reflects light in the form of radiation, as described above.
Technologies like LEDs are more complicated to explain.
determine the number of branches and nodes in the given circuit. the number of nodes present in the given circuit is . the number of branches present in the given circuit is .
Answers
The number of nodes present in the given circuit is the number of points where two or more components are connected together.
The number of branches present in the given circuit is the number of individual paths between the nodes.
To further elaborate on the topic, nodes and branches are essential components of an electrical circuit, as they are essential for the flow of current throughout the circuit. Nodes represent the points in a circuit where two or more components are connected together, while branches represent the individual paths that the current can take between the nodes.
Learn more about circuit:
https://brainly.com/question/2969220
#SPJ4
Which color of white light bends the most when it is refracted by a prism? red green yellow orange
Answers
The color of white light bends the most when it is refracted by a prism is green after the violet.
Why green bents towards the light?The shorter the wavelength of the mild, the greater its miles refracted. As a result, crimson mild is refracted the least, and violet mild is refracted the most - inflicting the colored mild to unfold out to shape a spectrum.
The hues of white mild withinside the order of lowering wavelength are crimson orange-yellow inexperienced blue indigo violet. Fro the listing we are given withinside the alternatives inexperienced has the shortest wavelength than others. Therefore inexperienced will bend the most.
Read more about the refracted :
https://brainly.com/question/1360744
#SPJ2
What is the linear distance traveled in one revolution of a 36-inch wheel
Answers
Answer:
36π inches ≈ 113.0973 inches
Explanation:
The circumference of the wheel is pi times its diameter.
C = πd
C = π(36 in) = 36π in ≈ 113.0973 in
The distance around the wheel is 36π inches, about 113.0973 inches.
who is the strongest avenger i say hulk but who knows at this point
Answers
Answer:
or is the strongest evenger she hulk
Explanation:
?????????
Answer:
Thor!
Explanation:
In Thor: Ragnarok he beat the Hulk in order for Hulk to win thor had to be electrocuted and in Avengers: Endgame Thor is seen holding open the "Floodgates" and withstanding the radiation from a dying star, also the fact that Thor is a god means that he is all powerful and the rightful heir to the throne to Asgard, plus the fact that he has defeated Loki multiple times a feat that not even the Hulk has done.
John Deere invented the phonograph.
Answers
Answer:
it is false john deere invented the self-scouring steel plow
Explanation:
In an ungrounded electrical systems with conductors installed in grounded metal raceways and enclosures, what is the voltage from the current carrying conductors to the metal raceways and why?
Answers
In the ungrounded electrical circuits or systems, the circuit is one that is not or do not have the connection to the grounding electrode.
What is an ungrounded electrical system?An ungrounded system is known to be defined as a system that is known to be one that do not have an intentional connection to ground, and it has an exception of possibly going through potential indication or other kinds of devices.
Note that The neutral of an ungrounded system is one that is seen to be under reasonably balanced load conditions and thus it is one that is usually near to ground potential.
Hence, In the ungrounded electrical circuits or systems, the circuit is one that is not or do not have the connection to the grounding electrode.
Learn more about electrical circuits from
https://brainly.com/question/2969220
#SPJ1
help protect the lower legs and feet from heat hazards like molten metal and welding sparks
Answers
Answer:
i think its called leggings thats wut my shop teacher told me
Explanation:
Question Is in the image provided
Answers
The two ways through which a computer model is likely to be used by an engineer in order to help refine a design are as follows:
Calculating the possible costs of building a design.Running simulations to test a problem with the design.Thus, the correct options for this question are A and D.
What do you mean by Computer model?A Computer model may be defined as a type of computer program that significantly runs on a computer that typically develops a model, or simulation, of a real-world feature, phenomenon, or any other event.
According to the context of this question, an engineer would try to perform the ways in order to support the refining of the design through the help of calculating the possible costs of building a design and the run simulations to test a problem with the design.
Therefore, the correct options for this question are A and D.
To learn more about Computer model, refer to the link:
https://brainly.com/question/17994947
#SPJ1