The additional reaction forces supplied at the supports on both ends of the bridge are 5,000 N each, which balances the downward force exerted by the stalled vehicle and maintains equilibrium.
To calculate the additional reaction forces that are supplied at the supports on both ends of the bridge, we need to consider the forces acting on the vehicle and the bridge.
The force acting on the vehicle is its weight, which is 10,000 N. When the vehicle is stalled, it exerts a downward force of 10,000 N on the bridge.
According to Newton's third law, for every action, there is an equal and opposite reaction. Therefore, the bridge exerts an upward force of 10,000 N on the vehicle, preventing it from falling through.
Since the vehicle is stalled one-quarter of the way across the bridge, we can assume that the bridge is symmetrical, and the distance between the supports on both ends of the bridge is three-quarters of the total length.
To maintain equilibrium, the additional reaction forces at the supports on both ends of the bridge must be equal and opposite to the downward force exerted by the vehicle. Therefore, each support must provide an additional upward force of 10,000 N / 2 = 5,000 N.
To know more about force, refer to the link below:
https://brainly.com/question/18917437#
#SPJ11
can someone please help me?? i’ll give brainilist
The coefficient of kinetic friction is 0.21, for a 8 kg block on the floor. It is being pulled by a 17 N force, what is the acceleration of the box?
The acceleration of the box is 0.025 m/s²
We'll begin by calculating the the frictional force
Coefficient of kinetic friction (μ) = 0.21
Mass (m) = 8 Kg
Acceleration due to gravity (g) = 10 m/s²
Normal reaction (N) = mg = 8 × 10 = 80 N
Frictional force (Fբ) =?Fբ = μN
Fբ = 0.21 × 80
Fբ = 16.8 NNext, we shall determine the net force acting on the boxFrictional force (Fբ) = 16.8 N
Force (F) = 17 N
Net force (Fₙ) =?Fₙ = F – Fբ
Fₙ = 17 – 16.8
Fₙ = 0.2 NFinally, we shall determine the acceleration of the boxMass (m) = 8 Kg
Net force (Fₙ) = 0.2 N
Acceleration (a) =?a = Fₙ / m
a = 0.2 / 8
a = 0.025 m/s²Therefore, the acceleration of the box is 0.025 m/s²
Learn more: https://brainly.com/question/364384
Multiples of the fundamental frequency created by plucking a string very quickly, several times in a row is called__________.
a.
pitch
c.
scales
b.
overtones
d.
percussion
Answer:
overtones
Explanation:
What is 18 °C in °F?
Answer:
18 degrees Celsius is equivalent to 64.4 degrees Fahrenheit.
Explanation:
To convert Celsius to Fahrenheit by using the formula
: (°C x 1.8) + 32 = °F
18 °C = 64.4 °F . Fahrenheit is a temperature scale created by German physicist Daniel Gabriel Fahrenheit in 1724.
What is Fahrenheit?
On this scale, temperature is measured by the expansion of a liquid, specifically a mercury-in-glass thermometer. The scale is based on three fixed points: the freezing point of pure water is defined as 32°F and the boiling point of pure water is defined as 212°F. The third point, 96°F, was determined to be body temperature. On the Fahrenheit scale, the difference between the freezing point and the boiling point of water is 180°F. There are 180 intervals between the two fixed points, and each interval is one degree.
The degree Fahrenheit (°F) is the most commonly used unit of temperature in the United States. 18 x (9/5) + 32 = 64.4°F
Therefore, 18 °C = 64.4 °F
To learn more about Fahrenheit Here: https://brainly.com/question/30403835
#SPJ4
newton'slaw tells us what happens in the absence of a force, and newton'slaw describes the effects of applying a force to an object.
true or false
True. Newton's Laws of Motion are fundamental principles that describe the relationship between force and motion. The first law, also known as the Law of Inertia, states that an object at rest will stay at rest, and an object in motion will stay in motion with a constant velocity in the absence of a net external force. This means that without any forces acting on it, an object will continue its current state, whether that's being stationary or moving.
The second law, also known as the Law of Acceleration, describes the effects of applying a force to an object. It states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Mathematically, this can be represented as F = ma, where F is the net force, m is the mass, and a is the acceleration.
The third law, also known as the Law of Action and Reaction, states that for every action, there is an equal and opposite reaction. This means that when a force is applied to an object, the object exerts an equal force back in the opposite direction.
In summary, Newton's Laws of Motion describe both what happens in the absence of a force and the effects of applying a force to an object. Therefore, the statement is true.
learn more about force and motion here: brainly.com/question/9711780
#SPJ11
Hello people ~
When a comb rubbed with dry hair attracts pieces of paper. This is because the______
(a) comb polarizes the piece of paper
(b)comb induces a net dipole moment opposite to the direction of field
(c)electric field due to the comb is uniform
(d) comb induces a net dipole moment perpendicular to the direction of field
\(\bold{Heya!}\)
Answer :-(b) comb induces a net dipole moment opposite to the direction of field.
Explanation :-When a comb rubbed with dry hair it's attracts pieces of piece of paper. This is because the comb that induces of the dipole net that of the moment thatopposite of the field. And, This happens the field dueing to charge of the comb induces of the dipole moment in the paper of the molecules in the dielectric.
Hopefully This Helps ! ~
#LearnWithBrainly
\(\underline{Answer :}\)
Jaceysan ~
Answer:
Option B
Explanation:
When a comb is rubbed with dry hair it induces some charge or its get charged either positive or negative
As paper remains in neutral hence it attracts the paper
Hence option B is correct
The weather of a region describes the region’s average temperature and precipitation over a long period of time.
True or False
Answer:
True!
Explanation:
Scientists usually state or determine the average temperature/precipitation over a long period of time. Several different tables or graphs are used to prove and check that this is true. Hope this helps!
A force of 10 N is applied to an object for 5 seconds. How long would a force of 15 N need to be
applied to the object to experience the same impulse?
A
B.
C.
D.
3.33 seconds
5 seconds
8.33 seconds
10 seconds
Answer:
3.33 seconds
Explanation:
formula of impulse J=Ft
so 10(5) = 15x
x = 50/15 = 3.33
That minimum coefficient of static friction between the tyres and the road that will allow the car that will round safely.
Answer:
The answer is "\(0.13562748\)"
Explanation:
Please find the complete question in the attached file.
Using formula:
\(\bold{U_s=\frac{v^2}{rg}}\)
Given:
\(r=1.60 \times 10^2 \ m\\\\g=9.8\\\\v= 52.5\ \frac{km}{hr}= 14.583\ \frac{m}{s}\)
put the value into the above-given formula:
\(U_s= \frac{14.583^2}{160 \times 9.8}\)
\(= \frac{212.663889}{1568}\\\\=0.13562748\)
what does a blue shift in light from stars indicate?
Answer:
If a star is moving towards the earth, its light is shifted to higher frequencies on the color spectrum (towards the green/blue/violet/ultraviolet/x-ray/gamma-ray end of the spectrum). A higher frequency shift is called a "blue shift".
Explanation:
It just means that the entire spectrum is shifted up in frequency.
20 POINTS! ANSWER CORRECTLY FOR BRAINLIEST!
Which of these is a similarity between a polar and a subtropical jet stream?
A. Both are formed at latitudes close to the poles.
B. Both are formed at latitudes close to the equator.
C. Both are formed at the boundary of warm and cool air masses.
(D not included because I know for a fact it is incorrect, I honestly think the answer is C but I just want other peoples opinions)
Answer:
C, Both are formed at the boundary of warm and cool air masses.
Answer:
c
Explanation:
Find Vn, Vout, and lout for the circuit shown below. Assume that the op amp is ideal. 6V 3ΚΩ www 1k02 www +5V 1.5mA -5V 2. Find Vn, Vout, and lout for the circuit shown below. Assume that the op amp is ideal. 6V 1k0 www 2.5KQ www +5V 3mA 2kQ www ΣΚΩ 4mA 5V 2k0 ww 8V 10k(2 -5V lout www-11 lout ww-11 Vou 5ΚΩ Vout ΣΚΩ
The voltage at the inverting terminal is 7.5 V. V out is -12.5 V. The current flowing through R4 is 0.5 mA.
Given that Vn, Vout, and lout for the circuit shown below and op amp is ideal.In the circuit, current I2 flows through the 2.5 kΩ resistor.
Therefore, the voltage drop across the 2.5 kΩ resistor is given by,
Vn = I2 x R2Vn = 3 mA x 2.5 kΩ = 7.5 V
Therefore, the voltage at the inverting terminal is 7.5 V.
Since op-amp is assumed to be ideal, no current flows into the inverting and non-inverting terminals.
Therefore, current through R3 is given by,
I3 = (Vn - Vout) / R3=> Vout = Vn - I3 x R3=> Vout = 7.5 V - 4 mA x 5 kΩ=> Vout = - 12.5 V
Therefore, Vout is -12.5 V.
Let's calculate the current flowing through R4:
This current will also flow through the 5 kΩ resistor.
Let lout be the current flowing through R4.
Therefore, current through the 5 kΩ resistor is also lout.
Now, I4 + lout = I3=> I4 = I3 - lout=> I4 = 4 mA - lout
Also, I4 = (5 V - Vout) / R4=> 4 mA - lout = (5 V - (-12.5 V)) / 5 kΩ=> 4 mA - lout = 3.5 mA=> lout = 0.5 mA
Therefore, lout is 0.5 mA.
To learn more about voltage ,
https://brainly.com/question/1176850
#SPJ4
what is the magnitude of the force a 22 μc charge exerts on a 3.5 mc charge 50 cm away?
The magnitude of the force is 2772 N/C².
The magnitude of the force a 22 μC charge exerts on a 3.5 mc charge 50 cm away can be found using Coulomb's law. Coulomb's law states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
The formula for Coulomb's law is F = kq₁q₂/r², where F is the magnitude of the force, k is Coulomb's constant (9 × 10⁹ Nm²/C²), q₁ and q₂ are the charges, and r is the distance between the charges.
Plugging in the given values, we get:
F = (9 × 10⁹ Nm²/C²)(22 × 10⁻⁶ C)(3.5 × 10⁻⁶ C)/(0.5 m)²
F = (9 × 10⁹ Nm²/C²)(77 × 10⁻¹² C²)/(0.25 m²)
F = (693 × 10⁻³ Nm²/C²)/(0.25 m²)
F = 2772 N/C²
To learn more about Magnitude :
https://brainly.com/question/24256733
#SPJ11
At the time of the founding of the country, most Americans worked as
A.shopkeepers
B.soldiers
C.ship builders
D.farm workers
Answer:
Farmers
Explanation:
At the time of founding our country most soldiers in the revolutionary war were farmers who were inexperienced.
Answer:
D. farm workers
Explanation:
It is because when they started founding the country, people needed food and everything was based on agriculture and economy, and the main economy wat cotton and tobacco.
Please I really need the help
Answer:
7) there is a theory that these animals can see the magnetic field of the Earth due to a compass like mechanism inside their eyes in order to navigate.
8) Earth's magnetic field is a result of the currents found inside the outer core that consist of electricity.
If an element starts off with an activity of 100Bq, and its half life is 10 minutes, what would the activity be after 5 minutes???
I'm literally giving out 100 points and I really need the help :/
From the calculation, the activity of the isotope is 70.7 Bq.
What is the half life?We define the term half life as the amount of a radioactive isotope that is left after a given time. It is in fact the time that it takes for only half of the amount of the radioactive isotopes that is in a sample to remain.
Recall that if a substance is radioactive, this implies that the sample is capable of spontaneous disintegration. The amount of the sample that is present tends to diminish in the system as time increases.
Give the fact that;
Ao = initial activity = 100Bq
A = activity after time t = ??
Time taken = 5 minutes
Half life of the isotope = 10 minutes
Now we know that;
A/Ao = (1/2)^t/t1/2
A/100 = (1/2)^5/10
A/100 = (1/2)^1/2
A = (1/2)^1/2 * 100
A = 70.7 Bq
Learn more about half life:https://brainly.com/question/24710827
#SPJ1
four forces act at a point in the image above. calculate the resultant.
Answer:
50° and 60°
Explanation:
hope this help
a 1.0-kg cart traveling at a constant 2.0 m/s across a level lab table 0.80 m above the floor is stopped in a distance of 0.20 m. the amount of work required to stop the cart is
The amount of work required to stop the cart is 7.84 J.
Mass of cart, m = 1 kg
Speed of cart, v = 2 m/s
Displacement, d = 0.2 m
Height of the table, h = 0.8 m
Let's calculate the gravitational potential energy of the cart as the cart is at the height of the table.
Energy = mgh
Energy = 1 x 9.8 x 0.8
= 7.84 J
The above value represents the energy of the cart before it was stopped.
When the cart is stopped, this energy gets converted into work done by the force of friction.
Let W be the work done by the force of friction.
Then,
W = Energy before - Energy after
W = 7.84 J - 0 J (as the cart has come to a stop)
W = 7.84 J
Therefore, the amount of work required to stop the cart is 7.84 J.
Learn more about the work done:
brainly.com/question/21854305
#SPJ11
at what distance from a 2.45*10^-6 C charge will the electric field be 100 N/C?
Answer:14.8
Explanation:
Trust me
The distance will be = 14.85 m
What is electric field ?A region around a charged particle or object within which a force would be exerted on other charged particles or objects.
given :
Charge (q)= 2.45*\(10^{-6}\) C
Electric field (EF) = 100 N/C
to find = ? distance (r)
Electric field = 1/4π∈o * (q/\(r^{2}\))
100 = 9 * \(10^{9}\) * ( 2.45*\(10^{-6}\) / \(r^{2}\))
\(r^{2}\) = 220.5
r= \(\sqrt{220.5}\)
r = 14.85 m
The distance will be = 14.85 m
learn more about Electric field
https://brainly.com/question/15800304?referrer=searchResults
#SPJ3
A wire ring of internal radius 3cm and external radius 3.2 cm is rested on the surface of a liquid and then raised. An extra pulling force equivalent to the weight of 3.03g is required before the film breaks than it is after. Calculate the surface tension of the liquid.
The surface tension of the liquid is 24.1 g/m.
How can we calculate the value of the surface tension of the liquid?To calculate the surface tension of the liquid, we can use the formula:
surface tension = (extra force required) / (length of the film)
extra force required = 3.03 g
internal radius = 3 cm = 0.03 m
external radius = 3.2 cm = 0.032 m
The length of the film can be calculated as the circumference of the external ring minus the circumference of the internal ring:
length of the film = (2 * pi * external radius) - (2 * pi * internal radius)
= (2 * pi * 0.032 m) - (2 * pi * 0.03 m)
= 0.1257 m
So, the surface tension can be calculated as:
surface tension = (3.03 g) / (0.1257 m)
= 24.1 g/m
The surface tension of the liquid is 24.1 g/m.
learn more about surface tension of the liquid: https://brainly.com/question/14530972
#SPJ1
A bicyclist starts from rest and accelerates along a straight path to a speed of 12.15 m/s in a time of 4.5 seconds. What is the bicyclist’s acceleration in m/s2?
a. 3.7
b. 54.7
c. 2.7
d. 6.8
The Bicyclist's Acceleration is 2.7 m/s2. Thus, Option C is the answer
The bicyclist's acceleration can be found using the equation:
acceleration = (final velocity - initial velocity) / time
In this case, the final velocity is 12.15 m/s, the initial velocity is 0 m/s (since the bicyclist starts from rest), and the time is 4.5 seconds. Plugging these values into the equation, we get:
acceleration = (12.15 m/s - 0 m/s) / 4.5 seconds
acceleration = 2.69 m/s2
Therefore, The correct answer is c. 2.7 m/s2
To learn more about Kinematics Equations,
https://brainly.com/question/28578178
major league baseball games last an average of 190.885 minutes (standard devaition =
Major League Baseball games last an average of 190.885 minutes with a standard deviation that was not specified in the question. The standard deviation is a measure of how much the data deviates from the mean or average.
It can be used to determine the spread of the data and how closely the individual values cluster around the mean. Without the standard deviation, it is difficult to make any further conclusions about the duration of MLB games.
It seems that your question is incomplete, and I cannot provide a proper answer without the necessary information.
To know more about standard deviation visit:-
https://brainly.com/question/29115611
#SPJ11
Can someone please help me? If somebody pushes a cart with 4N of force and the cart moves a distance of 2 meters, how much work did they do?
Answer:
Work done, W = 8 J
Explanation:
We have,
Force acting on the cart is 4 N
Cart covers a distance of 2 m
We need to find the work done by the cart. Work done by an object is given in terms of force and displacement. It can be given by :
\(W=Fd\\\\W=4\ N\times 2\ m\\\\W=8\ J\)
So, the work done by the cart is 8 J.
UWB WiGig has a range of up to 100 meters at 7 Gbps.
true/false
UWB WiGig, also known as Ultra-Wideband Wireless Gigabit, is a high-speed wireless communication technology that operates in the 60 GHz frequency band. This statement is true.
It is designed to provide data transfer rates of up to 7 Gbps and has a range of up to 100 meters. However, it is essential to note that these values may vary depending on environmental factors such as obstructions and interference.
WiGig was developed by the Wireless Gigabit Alliance, which later merged with the Wi-Fi Alliance. The technology is intended for applications such as high-definition video streaming, virtual reality, and wireless docking stations.
One of its main advantages is its ability to provide low-latency and high-speed data transfer, making it ideal for applications that require real-time communication.
In summary, UWB WiGig is a wireless communication technology that operates in the 60 GHz frequency band, providing data transfer rates of up to 7 Gbps and a range of up to 100 meters. The technology is designed for applications that require high-speed, low-latency wireless communication and can be affected by environmental factors.
to know more about communication technology refer here:
https://brainly.com/question/29236333#
#SPJ11
At t=0 a grinding wheel has an angular velocity of 21. 0 rad/s. It has a constant angular acceleration of 26. 0 rad/s2 until a circuit breaker trips at time t = 2. 10 s. From then on, it turns through an angle 438 rad as it coasts to a stop at constant angular acceleration. Through what total angle did the wheel turn between t=0 and the time it stopped?
At t=0 a grinding wheel has an angular velocity, the wheel turned through a total angle of approximately: 501.21 radians between t=0 and the time it stopped.
To find the total angle through which the wheel turned between t=0 and the time it stopped, we need to consider two parts: the angle covered during constant angular acceleration, and the angle covered while coasting to a stop.
1. During constant angular acceleration:
At t=0, the angular velocity is 21.0 rad/s, and the angular acceleration is 26.0 rad/s². The circuit breaker trips at t=2.10 s. Using the equation θ1 = ω0t + 0.5αt², we can find the angle covered during this time:
θ1 = (21.0 rad/s)(2.10 s) + 0.5(26.0 rad/s²)(2.10 s)²
θ1 ≈ 63.21 rad
2. While coasting to a stop:
After the circuit breaker trips, the wheel turns through an angle of 438 rad as it coasts to a stop at constant angular acceleration. This means θ2 = 438 rad.
To find the total angle through which the wheel turned, simply add θ1 and θ2:
Total angle = θ1 + θ2 = 63.21 rad + 438 rad ≈ 501.21 rad
Therefore, the wheel turned through a total angle of approximately 501.21 radians between t=0 and the time it stopped.
To know more about angular velocity, refer here:
https://brainly.com/question/13649539#
#SPJ11
WILL MARK BRAINLIST
"The envelope of air is known as the atmosphere"
what dose the word envelop mean?
Answer:
Definition of envelop
transitive verb
1: to enclose or enfold completely with or as if with a covering
2: to mount an attack on (an enemy's flank)
9. A metal coin has certain properties that can be measured. Which property of a coin is different on the moon than it is on Earth? C F a. mass b. weight c. volume d. density
Answer:
the weight is different on the moon
Explanation:
suspend your body from a pair of vertical ropes and the tension in each rope will be greater than your weight. half your weight. equal to your weight. none of the above
When you suspend your body from a pair of vertical ropes, the tension in each rope will be (c) equal to your weight.
According to Newton's third law of motion, for every action, there is an equal and opposite reaction. When you hang from the ropes, your weight acts downward, and the ropes provide an upward force to counteract your weight. This upward force is the tension in the ropes.
To maintain equilibrium and prevent any acceleration, the tension in each rope must be (c) equal to your weight. This balancing of forces ensures that you remain stationary and do not move up or down.
Therefore, the tension in each rope when you suspend your body will be equal to your weight.
To know more about the Newton's third law of motion refer here :
https://brainly.com/question/29768600#
#SPJ11
Technological design leads to the development and innovation of new technologies.
Which statement represents innovation?
O Solar panels have increased in efficiency over the past 20 years.
O The Sun is the primary source of energy for the solar system
O Previous models of a type of car have fewer engine problems.
O Natural selection ensures that only the fittest survive.
Answer:
Solar panels have increased in efficiency over the past 20 years
Explanation:
Because if efficiency have increased other technologies will be discovered
Answer:
Solar panels have increased in efficiency over the past 20 years
Explanation:
(b) A dark nebula is a type of nebula that does not emit light.
A dark nebula looks dark because it blocks the light from stars that are behind it.
Suggest why dark nebulae are thought not to contain stellar nurseries.
*******
Dark nebulae are thought not to contain stellar nurseries because they are primarily composed of gas and dust, which are the building blocks of stars, but they are too cold and dense to collapse and form stars.
What is nebula?A nebula is a distinctively luminous region of the interstellar medium, which may be made up of cosmic dust, neutral, neutrally ionized, or molecular hydrogen.
Because dark nebulae are predominantly made of gas and dust, the raw materials for stars, but are too cold and dense to collapse into stars, it is believed that they do not contain stellar nurseries.
In other words, the gas and dust in a black nebula are not in an ideal environment to start the star-forming process.
The quantity of light that is accessible for star formation may be diminished by the dust particles in dark nebulae that can absorb and scatter light.
Thus, despite the fact that black nebulae may contain a lot of gas and dust, they are not suitable for the formation of new stars, and are unlikely to contain stellar nurseries.
For more details regarding nebula, visit:
https://brainly.com/question/9497068
#SPJ9