all wheel nuts must be tightened to the correct torque and in the proper _____________
Answers
All wheel nuts must be tightened to the correct torque and in the proper sequence to ensure the safety of the vehicle and its passengers. Torque refers to the amount of force that is applied to the wheel nut when it is tightened onto the wheel stud.
If the torque is too low, the wheel nut may loosen over time, which can result in the wheel becoming detached from the vehicle while it is in motion. On the other hand, if the torque is too high, the wheel stud or nut may become damaged, which can also compromise the safety of the vehicle.In addition to the torque value, it is also important to tighten the wheel nuts in the proper sequence. The sequence refers to the order in which the nuts are tightened around the wheel. This is important because tightening the nuts in the wrong sequence can cause the wheel to be pulled off-center, which can lead to vibration and uneven wear on the tires. The proper sequence can vary depending on the make and model of the vehicle, so it is important to consult the owner's manual or a professional mechanic for guidance.Overall, it is crucial to ensure that all wheel nuts are tightened to the correct torque and in the proper sequence to prevent accidents and ensure the safe operation of the vehicle. Failure to do so can result in serious consequences, so it is important to take this task seriously and pay close attention to the details.For such more question on torque
https://brainly.com/question/17512177
#SPJ11
Related Questions
Which of the following Tosca elements need to be added to requirements as per best practice 
Answers
Templates are tosca elements that need to be added to requirements as per best practices.
Why do Templates need to be added?
Before you can run your tests, you must perform tasks manually that Template Selection enables you to automate. You can carry out the following actions in Step 3:
• The Test Case templates you want to employ for your tests should be chosen.
• Make a list of the test cases that will be executed or an execution list.
• Make a set of functional or non-functional criteria called a requirement set to evaluate the business risk of a test project.
What are Templates?
A file used as a model for a new document is known as a template. Templates have pre-filled placeholder fields and expertly crafted styles and layouts. When creating a new file, many word processors, presentations, desktop publishing products, and even website providers include template galleries that you can peruse.
To know more about templates, Check out:
https://brainly.com/question/13042079
#SPJ1
A horizontal curve on a two-lane highway (12-ft lanes) has PC at station 123 80 and PT at station 129 + 00. The central angle is 35 degrees, the superelevation is 0. 08 and 20. 6 feet is cleared (for sight distance) from the inside edge of the innermost lane.
Required:
Determine a maximum safe speed (assuming current design standards to the nearest 5 mi/hr.
Answers
The maximum safe speed for the horizontal curve is 55 mi/h. A horizontal curve is a geometric element that is used to modify the alignment of a roadway or highway.
The purpose of horizontal curves is to allow vehicles to turn more smoothly, as well as to adjust the roadway alignment to conform to the surrounding terrain. There are many different types of horizontal curves, including simple, compound, and reverse curves.The speed at which a vehicle can safely travel through a horizontal curve is a critical design consideration. There are many factors that can impact the safe speed of a vehicle, including the radius of the curve, the slope of the roadway, the superelevation, and the sight distance available to the driver. In general, designers will use a combination of these factors to determine the maximum safe speed for a given curve. AnswerThe maximum safe speed of the horizontal curve can be calculated using the following formula:
\($$V_{max} = \sqrt {\frac{30r}{f}} $$\)where Vmax is the maximum safe speed, r is the radius of the curve, and f is the side friction factor. In this case, the radius of the curve can be calculated as follows:
\($$r = \frac{360^\circ }{{2\pi \times 35^\circ }} \times \frac{{80\ ft + 20.6\ ft}}{{2\ \times 12\ ft}} = 292.98\ ft $$\)
The side friction factor can be determined using the following formula:
\($$f = 0.15 + \frac{{0.0005}}{{1 + \sqrt {\frac{R}{g}} }} $$\)
where R is the radius of the curve in feet, and g is the acceleration due to gravity. In this case, the side friction factor can be calculated as follows:
\($$f = 0.15 + \frac{{0.0005}}{{1 + \sqrt {\frac{{292.98\ ft}}{{32.2\ ft/s^2 }}} }} = 0.196 $$\)
Plugging these values into the formula for maximum safe speed yields:
\($$V_{max} = \sqrt {\frac{{30 \times 292.98\ ft}}{{0.196}}} = 56.7\ mph \approx 55\ mi/h $$\)
Therefore, the maximum safe speed for the horizontal curve is 55 mi/h.
Learn more about acceleration :
https://brainly.com/question/2303856
#SPJ11
A steam power plant with inlet steam to the High Pressure (h.p) turbine at 90 bar and 500°C, and condensation at 40°C produces 500 MW. It has one stage of reheat optimally placed which raises the steam temperature back to 500 °C. One closed feedwater heater with drains cascaded back to the condenser receives bled steam at a reheat pressure of 20 bar, and the remaining steam is reheated and then expanded in the Low Pressure (1.p.) turbine. The h.p. and 1.p. turbines have isentropic efficiencies of 92% and 90%, respectively. The isentropic efficiency of the pump is 75%. a) Draw the line diagram of the powerplant b) Draw T-s diagram showing all the processes. c) Using TTD = - 1.6 °C, calculate i) the mass flow rate of steam at turbine inlet in kg/s, ii) the cycle efficiency, and iii) the cycle work ratio.
Answers
a) Line Diagram of the Powerplant:
b) T-s Diagram Showing All Processes:
c) i) c) i) The mass flow rate of steam at turbine inlet can be calculated using the following equation:
m = 115.3 kg/s
ii) Wcycle = h2 - h1 - TTD*(m*(h2 - h3))
η = 42.2%
iii) Wcycle = h2 - h1 - TTD*(m*(h2 - h3))
R = 2.37
What is turbine ?
A turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The most common type of turbine is a steam turbine, which is used to generate electricity in power plants. Other types of turbines include water turbines, wind turbines, and gas turbines. Turbines are used in a wide range of applications, from large industrial plants to small-scale home appliances.
To know more about turbine
https://brainly.com/question/928271
#SPJ1
Find the slope of the line containing the points (6, 4) and (6,8).
A. -1
B. 1
C. 0
D. undefined
Answers
At halftime of a football game souvenir balls are thrown to the spectators with a velocity Vo. Determine the range of values of Vo if the balls are to land between B and C.
Answers
The range of velocity can be calculated as follows:
Range of velocity = \(4g × AB ÷ [√(2 × AC × BC) ]\)
Range of velocity = \(4g×9 ÷ [√(2 × 48 × 12)]\)
Range of velocity = 30.79m/sSo,
the range of values of Vo if the balls are to land between B and C is 30.79 m/s.
At halftime of a football game souvenir balls are thrown to the spectators with a velocity Vo. Determine the range of values of Vo if the balls are to land between B and C.
If the balls are to land between B and C, the velocity Vo should be such that the ball should hit the spectators at a point equidistant from B and C. The figure shows that the ball should be hit at a point that is 3/4 of the way from B to C.
Learn more about Determine the range : https://brainly.com/question/2264373
#SPJ11
a storage tank contains liquid with a density of 0.0361 lbs per cubic inch. the height of liquid in the tank is 168 feet. what is the pressure of the liquid at the bottom of the tank give your answer in psi
Answers
Answer:
Objects that float on water have densities less than the density of water; those that do not float on water have densisties greater than the density of water:
Float on water: d < 0.0361 lb/in³ (where d denotes denisity)
Do not float on water: d > 0.0361 lb/in³
Explanation:
I don't know if this works for it or not?
It is given thatopen parenthesis, x minus 2y, close parenthesis, times open parenthesis, x + 2y, close parenthesis, = 4Quantity A: x squared, minus, 4 times the quantity y squared Quantity B: 8 A. Quantity A is greater. B. Quantity B is greater. C. The two quantities are equal. D. The relationship cannot be determined from the information given.
Answers
Answer:
Quantity B is greater.
Explanation:
Given:
(x -2y)(x +2y) = 4
A = x² -4y²
B = 8
Find:
the relationship between A and B
Solution:
The given expression can be expanded to give ...
x(x +2y) -2y(x +2y) = x² +2xy -2xy -4y² = x² -4y²
This is precisely the expression designated as A. Its value is 4.
4 < 8
A < B
Quantity B is greater.
Two circular disks are parallel and directly facing each other. The disks are diffuse, but their emissivity’s varies with wavelength. The properties are approximated with step functions as shown. The disks are maintained at temperatures 1 1200 K and 2 800 K. The surroundings are at = 400 K. Compute the rate of energy that must be supplied to or removed from the disks to maintain their specified temperatures. The outer surfaces of the disks are insulated so there is radiation interchange only from the inner surfaces that are facing each other.
Answers
To compute the rate of energy that must be supplied to or removed from the disks to maintain their specified temperatures, we need to consider the radiative heat transfer between the two disks.
The rate of radiative heat transfer between two surfaces can be calculated using the Stefan-Boltzmann law, which states that the rate of heat transfer is proportional to the emissivity of the surfaces, the surface areas, and the temperature difference raised to the fourth power.
In this case, the radiative heat transfer rate between the two disks can be expressed as:
Q = ε1σA1(T1^4 - Tsur^4) + ε2σA2(T2^4 - Tsur^4)
where Q is the heat transfer rate, ε1 and ε2 are the emissivities of the disks (which vary with wavelength), σ is the Stefan-Boltzmann constant, A1 and A2 are the surface areas of the disks facing each other, T1 and T2 are the temperatures of the disks, and Tsur is the temperature of the surroundings.
By substituting the given values of ε1, ε2, A1, A2, T1, T2, and Tsur into the equation, we can calculate the rate of energy that must be supplied to or removed from the disks to maintain their specified temperatures.
Know more about Stefan-Boltzmann law here:
https://brainly.com/question/30763196
#SPJ11
Consider a person with a skin layer of L = 3 mm thickness and with thermal conductivity of 0.3 W/m K. Assume that the inner part of the skin is at 35 C whereas the outer part of the skin is exposed to the environment. The surface are ais about 1.8 m2 and the emissivity of the skin can be taken as 0.95. When the person is in still air at 297 K, what is the skin surface temperature and the rate of heat loss to the environment?
Answers
The skin surface temperature is 307.2 K and the rate of heat loss is 146 W.
How to find skin surface temperature?The skin surface temperature may be obtained by performing an energy balance at the skin surface to give the formula;
k(T_i - T_s)/L = h(T_s - T_∞) + h_r(T⁴_s - T⁴_surr)
Now, T_surround = T_s and so making T_s the subject gives us;
T_s = [(k*T_i)/L + (h + h_r)T_∞]/((k/l)
Using the equation h_r = εσ(T_s + T_surr)(T²_s + T²_surr) we can find h_r with a guessed value of T_s = 305 K and T∞ = 297 K, to yield h_r = 5.9 W/m².K.
Then, substituting numerical values into the T_s equation, we have;
T_s = [(0.3 * 308)/(3 * 10⁻³) + (2 + 5.9)297]/[((0.3 * 308)/(3 * 10⁻³)) + (2 + 5.9)]
T_s = 307.2 K
Thus the skin temperature is 307.2 K.
The rate of heat loss can be found by evaluating the conduction through the skin/fat layer:
q_s = kA(T_i - T_s)/L
q_s = 0.3*1.8(308 - 307.2)/(3 * 10⁻³)
q_s = 146 W
Read more about Skin Surface Temperature at; https://brainly.com/question/14866809
#SPJ1
who ever answers this gets 25 NON COSTLY points
Answers
Answer:
"cool"
Explanation:
Soru No 3
If you
Açık Öğretim Kurumlan Online Sınavı 300095
say
Bu cümlede boş
hangisi
Bu cümlede boş b/40
crijnilmelidir?
or
with someone in a conversation, you
cilindl3p4facvmyzzy2 on, you
yere seçeneklerden
hekle
indl 3p4jacymyzzxkm2ku2140
A) I'd exactly say the opposite
B) I am sorry for interrupting
C) You have a point there
ku2140
D) Never in a million years
Bu soruyu boş bırakmak istiyorum
p4facvmy
crimd13p4facy
Answers
primary u.s. interstate highways are numbered 1-99. odd numbers (like the 5 or 95) go north/south, and evens (like the 10 or 90) go east/west. auxiliary highways are numbered 100-999, and service the primary highway indicated by the rightmost two digits. thus, i-405 services i-5, and i-290 services i-90. note: 200 is not a valid auxiliary highway because 00 is not a valid primary highway number. given a highway number, indicate whether it is a primary or auxiliary highway. if auxiliary, indicate what primary highway it serves. also indicate if the (primary) highway runs north/south or east/west.
Answers
There is a photo attached with the code. Result: print ("0 is not a valid interstate highway number")
H is equal to int("Enter the highway number: "); if (h>=1 and h=99) take highway number If (h%2==0) for principal highway:
"I-%d is primary, moving eastward and westward,"%h, print #otherwise, even highway number:
print("I-%d is principal, travelling north/south"%h) #for odd road number elif(h>=100 and h=999): supplementary highway for
aux=str(h) #create a string to retrieve the rightmost number.
l=len(aux) val = aux[l-2] #find the length +aux[l-1] If (h%2==0): print("I-"+aux+" is auxiliary,"+"serving I-%d, going east/west"%h) else: print("I-"+aux+" is auxiliary,"+"serving I-%d, going north/south"%h) elif (h==0): print("I-"+aux+" is auxiliary,"+"serving I-%d, going east/ print #for 0 highway number ("0 is not a valid interstate highway number")
if not, pass
Learn more about Highway here-
https://brainly.com/question/17308859
#SPJ4
cable that weighs 4 lb/ft is used to lift 900 lb of coal up a mine shaft 350 ft deep. find the work done.
Answers
Answer: The total work done in pulling all the coal up the mine shaft is 1,430,000 lb-ft.
Explanation:
Sharon has just invented a new tractor that will plow and plant a new hybrid of corn at the same time. Which type of engineer is she?
Answers
Answer:
Agricultural engineer
Which option justifies the choice made in the following scenario?
Eli is an environmental engineer. He has recently designed a printer. Instead of plastic, a nonrecyclable material, he has chosen to design the printer using types of metal. It is more costly, but he plans to set up a recycling program where parts from the printer can be reused in the production of future printers.
✔️The material he chose is renewable but will increase costs with his recycling program.
✔️The material he chose is nonrenewable but can be used in future products to reduce costs.
✔️The material he chose is nonrenewable and will increase costs with his recycling program.
✔️The material he chose is renewable and is much better for the environment.
Answers
The fact that Eli plans to set up a recycling program made him choose D. The material he chose is renewable and is much better for the environment.
What is recycling?It should be noted that recycling simply means the process of collecting and processing materials that can be turned into another product.
Therefore, the material he chose is renewable and is much better for the environment and thus influenced his decision.
Learn more about recycling on:
https://brainly.com/question/1152017
The steel bracket is used to connect the ends of two cables. if the allowable normal stress for the steel is sallow = 30 ksi, determine the largest tensile force p that can be applied to the cables. assume the bracket is a rod having a diameter of 1.5 in.
Answers
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
The static equilibrium is given as:
F = P (Normal force)
Formula for moment at section
M = P(4 + 1.5/2)
= 4.75p
Solve for the cross sectional area
Area = \(\frac{\pi d^{2} }{4}\)
d = 1.5
\(\frac{\pi *1.5^{2} }{4}\)
= 1.767 inches²
Solve for inertia
\(\frac{\pi *0.75^4}{4}\)
= 0.2485inches⁴
Solve for the tensile force from here
\(\frac{F}{A} +\frac{Mc}{I}\)
30x10³ = \(\frac{P}{1.767} +\frac{4.75p*0.75}{0.2485} \\\\\)
30000 = 14.902 p
divide through by 14.902
2013.15 = P
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
Read more on tensile force here: https://brainly.com/question/25748369
SET B: Quiz: (15 marks) Individual Task Book link: httips:/laiubedu60714- my. Sharepoint.com/:b:/alpersonal/mehzab nahid aiub edu/ERv2FzNZDKdLiGknykpiVisBi02Sd6990V34 tahQi7JUig?e=twXxGe Trade finance refers to financial transactions, both domestic and international, that relate to trade receivables finance and global trade. Trade finance is a core business function for all global banks, especially tier 1 banks. Given its importance, it still lags in its application of technology and still resorts to using very manual processes for its document-centric flows. This leads to interruption in business cycles, and the lack of transparency leaves the door open to financial crime. Supply chains between many parties are complicated, distributed, and lack trust, therefore they are very slow and need many third parties such as banks and clearinghouses to facilitate the trust aspect and allow the commerce supply chain to flow. Q. How blockchain can offer solution to suppiy chain finance? [15 Marks]
Answers
Blockchain can provide solutions to supply chain finance as follows:
Facilitates faster transactions
Blockchain offers the possibility of reducing intermediaries in the supply chain finance by creating a secure, transparent network that can streamline processes and enable faster, more efficient transactions.
This can help in reducing processing times and costs, improving the speed and efficiency of the supply chain finance.
Improves transparency
One of the main advantages of blockchain is that it allows for transparent transactions.
All transactions are recorded on a shared ledger, which means that everyone on the network can see what is happening.
This can help to reduce the risk of fraud and errors and provide greater visibility into supply chain finance processes.
Provides a secure network
Blockchain is a secure network that uses cryptography to protect against fraud and hacking.
This makes it an ideal solution for supply chain finance as it can help to reduce the risk of fraud and errors.
The blockchain technology can provide security in various transactions like cross-border payments, letter of credits, and other trade finance transactions.
The blockchain technology can remove the intermediaries in the transaction and provide a more secure transaction platform, thus increasing the trust in the supply chain and reducing the risk of fraud.
Learn more about Blockchain from the given link
https://brainly.com/question/30793651
#SPJ11
innovative ideas for civil engineering individual project? I'm running out of time. Need to submit and get approval for this. Please help me and give me a new title to research.
For an egsample- Investigation of replacing Ricehusk instead of Sand in C30, Like wise
Answers
Answer:
Top Final year projects for civil engineering students
• Geographic Information System using Q-GIS. ...
• Structural and Foundation Analysis. ...
• Construction Project Management & Building Information Modeling. ...
• Tall Building Design. ...
• Seismic Design using SAP2000 & ETABS.
Explanation:
Hope it's help
What braking system would be the most unsafe for a car going over 200mph?
Answers
Answer:
Deactivated Anti-Lock Braking System
Explanation:
Well this actually depends on the vehicles braking function
I'd say in this case not sure if ABS coz it prevents the vehicle from slipping while braking...
On the otherside ESP is inportant for it stability
differentiate between centrifugal pump and positive displacement pump
Answers
The differentiation between centrifugal pump and positive displacement pump are given below
What is the centrifugal pump?Centrifugal pumps and positive displacement pumps are two common types of pumps used in many industries. The key difference between these two types of pumps is in the way they operate and move fluid.
Centrifugal Pump:
A centrifugal pump is a type of pump that uses centrifugal force to move fluid through the pump. It works by using an impeller that rotates at high speed to create a flow of fluid. The impeller has curved blades that direct the fluid in a radial direction, causing the fluid to move away from the center of the impeller and into the discharge pipe.
Positive Displacement Pump:
A positive displacement pump is a type of pump that uses mechanical force to move fluid through the pump. It works by trapping a fixed amount of fluid in a chamber and then forcing that fluid out of the chamber through a discharge pipe. This is typically achieved using a reciprocating piston, a rotating gear or a flexible diaphragm.
Learn more about centrifugal pump from
https://brainly.com/question/13001922
#SPJ1
the control circuit must produce an output of 1 if at least two of the conditions 1,2 and 3 are true. design the simplest circuit that can be used for this purpose.
Answers
The simplest circuit that can be used for the control circuit must produce an output of 1 if at least two of the conditions 1,2 and 3 are true is given below.
What is control circuit?A special kind of circuit known as a control circuit is used to regulate the performance of a totally independent power circuit. Think about a water pump being driven by a 1,000 horsepower, large industrial motor. A high voltage electrical source with a 2,400 volt output is connected to the motor.
For the safety of the operator and the machinery, a control circuit is used to ensure that the motor is started and stopped safely.
The thermostat for a home's air conditioner is an illustration of a control circuit that is frequently used. The thermostat is a component of a low-voltage control circuit that manages a relay that actually activates and deactivates the power circuit to the air conditioner compressor.
See the given attachment below for the simplest circuit↓↓
Learn more about control circuit
https://brainly.com/question/28625332
#SPJ4
Fall restraint systems must meet which of the falling criteria?
Answers
To meet the necessary criteria for effective fall restraint,the principles are Adequate Anchorage,Proper Fit and Adjustment,Maximum Arrest Force,Compatibility and Integrity and Proper Training and Use.
Fall restraint systems are designed to prevent a person from falling while working at heights. To meet the necessary criteria for effective fall restraint, the system must adhere to several key principles:
1. Adequate Anchorage: The system should be securely anchored to a structure capable of withstanding the anticipated loads. Anchorage points must be structurally sound and capable of supporting the maximum forces that may be exerted during a fall.
2. Proper Fit and Adjustment: The fall restraint system should be properly fitted and adjusted to the individual worker. This includes ensuring that harnesses, belts, and lanyards are correctly sized and adjusted for the user's body type and work requirements.
3. Maximum Arrest Force: The fall restraint system should limit the maximum force exerted on the worker's body in the event of a fall. This helps minimize the risk of injury by reducing the impact force transmitted to the body during a fall arrest.
4. Compatibility and Integrity: All components of the fall restraint system must be compatible with each other and function together as intended. This includes the harness, lanyard, connectors, and anchorages.
Regular inspections and maintenance should be conducted to ensure the integrity of the system.
5. Proper Training and Use: Workers must be adequately trained in the proper use of the fall restraint system. They should understand how to properly don and doff the equipment, inspect it for defects, and recognize when the system is not suitable for use.
By meeting these criteria, fall restraint systems can effectively protect workers at heights, reducing the risk of falls and their associated injuries.
For more such questions on restraint,click on
https://brainly.com/question/24632598
#SPJ8
Which of the following things is not true?
a)The centrifuge must first be loaded and balanced symmetrically before spinning.
b)Angle Head centrifuge is the best centrifuge for urinalysis department
c)Never use a tube alone.
d)Always close the centrifuge door.
e)Care of a centrifuge includes daily cleaning of any spills
Answers
Option b) Angle Head centrifuge is the best centrifuge for urinalysis department is not true.
A centrifuge is a laboratory instrument that separates fluids, gases, or liquids by spinning them at high speeds. Because it creates a centrifugal force that separates the molecules based on size, shape, and density, it is effective.
In a centrifuge, a sample is placed in a test tube that is placed in a rotor. When the rotor spins, the centrifugal force is created. The sample particles move outward, and the denser particles are pushed toward the bottom of the test tube. The less dense particles will rise to the top of the test tube. After spinning, the sample is separated and ready for further examination.
You can learn more about centrifuge at: brainly.com/question/31465291
#SPJ11
What is a collection of configuration settings stored as a text file with an .inf extension?
a. Security template
b. Policy configuration
c. Deployment list
d. None
Answers
how big of an earthquake can california buildings withstand?
Answers
Building design, age, and location are just a few of the variables that affect how much shaking California buildings can sustain from earthquake.
Explain what an earthquake is.An earthquake is a sudden shaking of the earth's crust caused by the movement of geological materials beneath it.. The earthquakes begin at the tectonic plate boundary. The shifting of tectonic plates is what causes tectonic earthquakes.
What caused the earthquake, and why?Usually, sudden subsurface rock fracture and rapid movement along a fault cause earthquakes.. This sudden release of energy results in the seismic waves that shake the earth.
To know more about earthquake visit:-
https://brainly.com/question/17032464
#SPJ4
When you hover over an edge or point, you are activating ____________ in SketchUp?
A. Zoom Focus
B. Inference Tools
C. Drawing Tools
D. Selection Filters
Answers
I remember this bc it is a question in my test from last week lol
technician a says that an analog scope can store the waveform for viewing later. technician b says that the trigger level has to be set on most scopes to be able to view a changing waveform. which technician is correct?
Answers
Both Technician A and Technician B are correct. An analog oscilloscope can store the waveform for viewing later, and the trigger level must be set on most scopes to be able to view a changing waveform.
An oscilloscope is a device used to measure and analyze electrical signals in oscillatory form. It consists of a display, vertical and horizontal amplifiers, and a trigger. The trigger is used to capture a specific point of the waveform and synchronize it with the display. It is important to set the trigger level correctly in order to get an accurate reading of the waveform.
Learn more about analog scope:
https://brainly.com/question/14290207
#SPJ4
The pyramids in Egypt are cited as an ancient world wonder. What is the main
reason that the pyramids are important to the study of engineering?
Answers
The pyramids are important to the study of engineering because they were some of the first structures built using engineering principles. The pyramids are an example of how engineering can be used to create amazing structures.
What is pyramid?
A pyramid is a structure with triangular exterior surfaces that converge to a single step at the summit, giving the shape the shape of a pyramid in the geometric sense. A pyramid's base can be trilateral, quadrilateral, or any polygon shape. A pyramid, as a result, has at least three exterior triangle surfaces. A typical variant is the square pyramid, which has a square base and four triangular exterior surfaces. The design of a pyramid, with the majority of the weight closer to the bottom and the pyramidion at the apex, means that less material will be pushed down from above. This weight distribution enabled early civilizations to build stable massive constructions.
To learn more about pyramid
https://brainly.com/question/218706
#SPJ13
According to astm d2487, a piece of stone with a 1.5-inch diameter is considered:______.
Answers
Answer: Your answer friend is Boulder. Good luck man
Explanation:
Hi. Help me guyz.
Read the resistance below indicated by the letters.
Answers
Answer:
2/4
7/2
92/1
83/1
9/1
93/0
Explanation:
R
K
K
R
K
R
I don't really know the answer