Based on the information given the multiplier, assuming there are no taxes or imports is 1.67.
Using this formula
Multiplier = 1 / ( 1 - MPC)
Where:
MPC=Marginal propensity=0.40
Let plug in the formula
Multiplier = 1 / ( 1 - 0.40)
Multiplier =1/.60
Multiplier = 1.666
Multiplier =1.67 (Approximately)
Inconclusion the multiplier, assuming there are no taxes or imports is 1.67.
Learn m ore about multiplier here:https://brainly.com/question/16679315
Lead Was Once Used in Makeup
Answer:
I DIDN'T UNDERSTAND IS IT FUN FACT OR A YOU'RE TRYING TO ASKQUESTION ?Assume the government sets a price ceiling, or maximum price800 rent per month Based on the graphwhat will be the outcome of this price
The outcome of the ceiling price $800 rent is that the quantity supplied will remains at the same.
What is a price ceiling?This refers to a price order by the government that keeps a price from rising above a certain level known as the “ceiling”.
In the graph, the horizontal line at the price of $800 shows the maximum price set by the rent control law.
The forces that shifted the demand curve to the right are still there, but, at this price, the quantity supplied will remains at the same 15,000 rental units although the quantity demanded is 19,000 rental units.
Read more about price ceiling
brainly.com/question/2759444
#SPJ1
Answer: There will be a rental housing shortage.
Explanation:
You have $25,000 of credit card debt, and you decide that you will never charge another
cent on this card. You pay only the minimum that the credit card company asks you to
pay each month. Your interest rate is 18 percent and the minimum payment is just 2
percent of your balance. How long will it take you to pay off the debt in full if you never
charge another cent?
O 22 years
34 years
0 73 years
08 years
Answer:
73 years
Explanation:
I took a quiz with this question and 73 was correct.
Which of the following explains why people became more malnourished after society started relying on agriculture
rather than hunting and gathering?
Commodities were exchanged using money, which was not equally available.
Commodities were often difficult to grow in areas where conditions suited societies
Commodities were controlled by the social elite and the food was not divided evenly
Commodities were found to be too much work for too little money so few people grew crops
Answer:
the answer would be the second one :)
Project: Career Assessment
Assignment Directions:
List five careers that you can envision yourself pursuing (perhaps in the business or legal profession):
Explain in three to four paragraphs why you have chosen these careers in particular and what additional education or experience will help you land a job in one of these fields.
When applying for a federal government position, applicants typically have to contribute a summary of their particular knowledge, skills, and assessments (KSAs). What are your particular KSAs above for the jobs that you have listed?
The length of this project should be at least 750 words.
Assignment Guidelines:
Your response must include the following:
Follow the instructions provided above.
Show that you put some thought into your career selections and answers.
Indicate that you spent some time considering what your KSAs are.
Proofread for spelling, grammar, and punctuation.
Use complete sentence structure and standard written English. Do not use texting abbreviations or other shortcuts.
In this career assessment, the I consider five professions that I can envision myself pursuing, mainly in the fields of business and law. In this response, I will explain the reasons behind his career choices.
What are these career choices?1. Business Development Manager:
A career as a business development manager appeals to me because of its dynamic and versatile nature. Pursuing an MBA with a focus on strategy and marketing will give you a comprehensive understanding of market dynamics, financial analysis and effective leadership. Gaining experience in sales and project management will improve your ability to drive revenue growth and navigate complex business environments.
2. Human Resources Manager:
I have a strong interest in human resources (HR) due to its vital role in fostering a positive work environment and supporting employee well-being. My KSAs for this role include exceptional interpersonal and communication skills, a deep understanding of employment laws and regulations, and the ability to handle sensitive employee issues with confidentiality and professionalism.
3. Intellectual Property Lawyer:
The intersection of law and innovation has always fascinated me, which is why I am drawn to a career as an Intellectual Property (IP) Lawyer. My KSAs for this role include strong analytical and research skills, excellent written and oral advocacy skills, and the ability to understand complex legal concepts and apply them to real-world scenarios.
4. Management Consultant:
As a problem solver with a passion for making a positive impact, a career as a Management Consultant holds great appeal. My KSAs for this role include strong critical thinking and analytical skills, effective communication and presentation abilities, and a keen understanding of business processes and organizational dynamics.
5. Corporate Lawyer:
A career as a Corporate Lawyer aligns with my interest in law, business, and complex problem-solving. My KSAs for this role include strong legal research and writing skills, attention to detail, excellent negotiation skills, and the ability to work under pressure and meet deadlines.
Summary of KSAs:
Throughout the selection of these careers, I have identified a range of knowledge, skills, and assessments (KSAs) that contribute to my suitability for each role:
1. Strong communication and negotiation skills
2. Strategic mindset
3. Interpersonal and empathy skills
4. Analytical and problem-solving abilities
5. Research and writing skills
6. Attention to detail
7. Adaptability and flexibility.
Conclusion:
Pursuing additional education such as an MBA, JD, or professional master's degree, combined with relevant experience through an internship will give you the practical knowledge and skills you need to excel in this field. Her KSA's include strong communication, strategic thinking, analytical skills and interpersonal skills.
learn more about career choices: https://brainly.com/question/6947486
#SPJ1
The process of allocating funds to projects and investments includes the following:
A. Analysis
B. Selection
C. Monitoring
D. Evaluating performance
Analyze or explain any three of the above.
The process of allocating funds to projects and investments involves several important steps, including analysis, selection, and monitoring. By following these steps, organizations can make informed decisions about where to invest their resources and ensure that their investments are delivering the expected returns.
The process of allocating funds to projects and investments involves several important steps, including analysis, selection, monitoring, and evaluating performance. Here are explanations of three of these steps:
Analysis: This step involves gathering and analyzing information about potential projects and investments to determine whether they are financially viable and aligned with the organization's goals and objectives. This includes conducting market research, analyzing financial statements and projections, assessing risks, and identifying potential barriers to success. The analysis phase helps decision-makers to make informed choices about which projects and investments to pursue.
Selection: Once potential projects and investments have been analyzed, the next step is to select the most promising ones. This involves using the information gathered during the analysis phase to compare options and choose the projects and investments that are most likely to provide the greatest returns on investment. The selection process may involve developing criteria for evaluating potential options, ranking them based on their financial potential, and weighing the costs and benefits of each option.
Monitoring: Once projects and investments have been selected and funded, it is important to monitor their progress and performance over time. This involves regularly reviewing financial and operational data to identify any potential issues or risks, and taking action to address them. Monitoring can help decision-makers to stay informed about the status of their investments, identify opportunities for improvement, and make adjustments to their funding strategies as needed.
for more question on investment visit:
https://brainly.com/question/29547577
#SPJ11
00 For Market failures means that the market has not achieved its optimum production outcome. This means that it has not produced the correct quantity of goods and services. QUESTION 1 Conduct a research to any small business that is manufacturing goods in your community. Make an appointment to interview the owner for the purpose of collecting the information using the questionnaire below. 1.1 General information: ● Name of the firm / business Specify the type of goods or service ● ● Position of the person interviewed ● Date of the interview 1,2 Explain briefly the negative impact the following factors have in your business. (10) Lack of information: ● Price discrimination Immobility of factors of production with special reference to: Physical capital Structural changes ● ● (1) ● (1) (1) (1) [14] QUESTION 2: Interview 3-4 community members that reside near the business you have visited. 2.1 Ask them to name any TWO negative externalities and TWO positive externalities caused by the local business, (2 x 2) (4) 2.2 Request them to list any TWO characteristics of public goods. (2 x 1) (2) 2.3 Use the negative externality and positive externality graphs to explain the impact this business have to the society (10) [16]
The first step in researching a small business in your neighborhood is to find a suitable nearby manufacturing company.
Once you do, contact the manager or owner to arrange an interview. Gather general information during the interview, such as the name of the company or business, what types of products or services they provide, the interviewer's position, and the time and date of the interview.
Then, focus on the detrimental effects different situations can have on the company. Briefly describe the impact on business of informational gaps, price discrimination, immobility of production variables (with a focus on physical capital), and structural changes.
Interview three to four locals who live close to the establishment you just visited. Ask them to list two unfavorable and two beneficial externalities brought about by the neighborhood business. Ask them to add two properties of public goods to the list as well.
Finally, use the data from the interviews to create graphs showing the positive and negative externalities of business on society. These infographics will graphically describe the costs and benefits that the company's neighborhood has.
Learn more about business, here:
https://brainly.com/question/15826604
#SPJ1
Click this link to view O*NET’s Work Activities section for Architects. Note that common activities are listed toward the top, and less common activities are listed toward the bottom. According to O*NET, what are common work activities performed by Architects? Check all that apply.
repairing and maintaining mechanical equipment
communicating with persons outside of the organization
drafting, laying out, and specifying technical devices, parts, and equipment
using dynamic flexibility to repeatedly bend, stretch, or twist with arms or legs
using night vision and peripheral vision
making decisions and solving problems
thinking creatively
Answer:
b)communicating with persons outside of the organization c)drafting, laying out, and specifying technical devices, parts, and equipment f)making decisions and solving problems g)thinking creatively
Explanation:
Answer:
B, C, F, G
Explanation:
Suppose that business travelers and vacationers have the following demand for airline tickets from New York to Boston:
Price Quantity Demanded by Business Travelers Quantity Demanded by Vacationers (Dollars)
150 2,100 (Tickets) 1,000 (Tickets)
200 2,000 800
250 1,900 600
300 1,800 400
Required:
a. As the price of tickets rises from $200 to $250, what is the price elasticity of demand for (i) business travelers and (ii)vacationers? (Use the midpoint method in your calculations.)
b. Why might vacationers have a different elasticity from business travelers?
Answer and Explanation:
a. The computation of the price elasticity of demand is
i. For business travelers
= {(1900 - 2000) ÷ [(1900 + 2000) ÷2]} ÷ {(250 - 200) ÷ [(200 + 250) ÷ 2]}
= 0.23
ii. For Vacationers
= {(800 - 600) ÷ [(800 + 600) ÷ 2]} ÷ {(250 - 200) ÷ [(200 + 250) ÷ 2]}
= 1.29
b. Since the price would increase from $200 to $250 so the price elastiicy of business travelers & vactationers is 0.23 and 1.29 respectively. So the demand for for airline tickets would be more elastic for vacationers as the business travelers would be less senstitive for price change
SunRay Foundation, a corporation owned and managed by volunteers, supplies medicines and vaccines to impoverished people in Asia and Africa. Its focus is not on earning a surplus but on serving the community. SunRay Foundation is an example of
Answer:
" Nonprofit corporation" is the right solution.
Explanation:
A non-profit corporation would be an organization constructed again for benefit of the community better, for compassionate or some other kind of government service primary motivations, instead of just merely to generate a financial gain on its own, as when the customer requested to be doing. The strongest reason for utilizing the whole degree of formal entity is that everything is responsible for claim federal and state taxes on just about any earnings the corporate entity receives, with exception of for corporate entities.Why do people establish their own business?
Answer:
financial freedom
Explanation:
the reasons people start their own business is usually because they desire financial freedom meaning they would like have more disposable resources for themselves.
as the tax assessor for Indian creek county, you have been informed that due to budgetary demands, a tax increase will be necessary next year. The total market value of the property in the county is $800,000,000. currently, the assessment rate is 35% and the tax rate is 40 mils. The county commission increases the assessment rate to 45% and the tax rate to 45 mils
Answer:
this didnt make sense but ok
Explanation:
Similarities between organized Sector and Unorganised sector
Answer:
The sector which is registered and follows government rules and regulations, having employees and employee unions is called as an organised sector. ... The sector that comprises of small-scale enterprises or units and is not registered with the governmen
Domain and Range Digital Escape! puzzle 3
A function/graph/relation's domain and range are defined as follows:
Domain: a collection of input values.Range: a collection of output values.What are a function's domain and range?The domain of a function is the set that contains all of the function/relation's potential input values; hence, it is made up of x values.
The range of a function is the set that contains all of the function/relation's potential output values; hence, it is made up of y values.
Because the problem is incomplete, the notions of domain and range are given and then applied to derive the domain and range.
Learn more about Domain:
https://brainly.com/question/30133157
#SPJ1
Full Question:
Although part of your question is missing, you might be referring to this full question:
Please define the terms
(Ethical Dilemma)
The American car battery industry boasts that its recycling rate now exceeds 95%, the highest rate for any commodity. However, with changes brought about by specialization and globalization, parts of the recycling system are moving offshore. This is particularly true of automobile batteries, which contain lead. The Environmental Protection Agency (EPA) is contributing to the offshore flow with newly implemented standards that make domestic battery recycling increasingly difficult and expensive. The result is a major increase in used batteries going to Mexico, where environmental standards and control are less demanding than they are in the U.S. One in five batteries is now exported to Mexico. There is seldom difficulty finding buyers because lead is expensive and in worldwide demand. While U.S. recyclers operate in sealed, mechanized plants, with smokestacks equipped with scrubbers and plant surroundings monitored for traces of lead, this is not the case in most Mexican plants. The harm from lead is legendary, with long-run residual effects. Health issues include high blood pressure, kidney damage, and detrimental effects on fetuses during pregnancy, neurological problems, and arrested development in children.
Given the two scenarios below, what action do you take?
a) You own an independent auto repair shop and are trying to safely dispose of a few old batteries each week. (Your battery supplier is an auto parts supplier who refuses to take your old batteries.)
b) You are manager of a large retailer responsible for disposal of thousands of used batteries each day.
Answer:
(Ethical Dilemma)
The American car battery industry
a) I will establish contact with battery recyclers in the U.S. to work out a good arrangement with them to collect the old batteries periodically. Some favorable terms with the recyclers will rake in some revenue on disposal. Alternatively, I will search for resellers who export to some recyclers in Mexico or other countries, which operate with reasonable ethical environmental standards and get them to buy the old batteries. I am aware that not all the recyclers in Mexico will be following less demanding standards. My shop can work through such recyclers.
b) As a manager of a large retailer with responsibility for the disposal of thousands of used batteries each day, I will seek to understand that correct environmental standards are being followed by the buyers of used batteries in the US, Mexico, or elsewhere before selling to them. Non-compliance with ethical and environmental requirements do not just jeopardize the health of those directly involved, the health of many others are also in danger. I cannot only be interested in selling off used batteries, I will ensure that the environmental footprint is not too high, because I, my family, and my business live and operate in the environment. We must conserve a clean environment for the continued health of all.
Explanation:
Ethical environmental matters affect every living person. The future is put in danger if nothing is done rightly today.
Jill's Job Shop buys two parts (Tegdiws and Widgets) for use in its production system from two different suppliers. The parts are needed throughout the entire 52-week year. Tegdiws are used at a relatively constant rate and are ordered whenever the remaining quantity drops to the reorder level. Widgets are ordered from a supplier who stops by every three weeks. Data for both products are as follows:
a. What is the inventory control system for Tegdiws? That is, what is the reorder quantity and what is the reorder point?
b. Find the total inventory costs if using inventory policy.
This is a case considering safety stock (make sure to use the right formulas)
Holding cost per unit per year is given as a percentage of item cost
Reorder point is the level of inventory that the firm holds in stock and when the inventory level reach this point, the firm must reorder the item.
How to represent the informationEconomic Order Quantity refers to the number of unit the company should add to the inventory and the order is made to minimize the total inventory cost. It maintains a balance between ordering costs and carrying costs.
EOQ act as a review inventory system to monitor the inventory level continuously and once the level reaches the reorder point, a fixed quantity of the order is placed. Thus EOQ helps in calculating reorder points and optimal reorder quantity to avoid a shortage of inventory.
A periodic review system also called a fixed interval to reorder system has four original economic order quantity assumptions: -
There are no restrictions on lot size.ordering cost and carrying costdemand should be independentThe lead time is constant.Read more about review inventory system here:
https://brainly.com/question/29751166
#SPJ1
Criteria for recruitment of business administration department
Explanation:
A business administration professional typically needs a bachelor's degree in a relevant field, such as business administration, finance, or human resources. A bachelor's requires four years of full-time stud
Mr. D is the manager of a local walgreens. His biggest concern is to make sure that his store is always making the most profit possible. He cuts costs by focusing on certain logistical decisions. Every other day walgreens receives shipments from pepsi, evian, hershey, and numerous other manufacturers. Walgreens insists on small shipments every two days, which helps to keep their inventory costs low. What system is mr. D using at walgreens to reduce his costs?.
The system is mr. D using at walgreens to reduce his costs is just in time inventory.
What is just in time inventory?JIT, or just-in-time inventory management, involves only ordering products from vendors when they are actually needed. This approach's primary goals are to lower the cost of keeping inventory and boost inventory turnover.With a just-in-time (JIT) inventory system, a business receives products as close as feasible to the moment they are actually required. As a result, if an auto assembly facility wants to install airbags, it doesn't maintain a supply on hand; instead, it gets them as the cars are put together.In conclusion. When used properly, JIT inventory can be a terrific method to reduce costs and boost productivity.
To learn more about just in time inventory refer to:
https://brainly.com/question/8842151
#SPJ4
MC Qu. 150 Glaston Company manufactures... Glaston Company manufactures a single product using a JIT inventory system. The production budget indicates that the number of units expected to be produced are 184,000 in October, 192,500 in November, and 189,000 in December. Glaston assigns variable overhead at a rate of $0.80 per unit of production. Fixed overhead equals $141,000 per month. Compute the total budgeted overhead that would appear on the factory overhead budget for month of October.
Answer:
$288,200
Explanation:
Computation for the total budgeted overhead that would appear on the factory overhead budget for month of October.
Using this formula
Total budgeted overhead=(Units expected to be produced*Variable overhead rate)+Fixed overhead
Let plug in the formula
Total budgeted overhead=(184,000 * $0.80) + $141,000
Total budgeted overhead=$147,200+$141,000
Total budgeted overhead = $288,200
Therefore the total budgeted overhead that would appear on the factory overhead budget for month of October is $288,200
Which of the following situations involves
professional literature?
An employee borrows an industry magazine
to read a story about a new machine in his
department.
An employee is coached by a supervisor on
a new machine in his department.
An employee takes an online course about a
new machine in his department.
Answer:
An employee borrows an industry magazine
to read a story about a new machine in his
department.
Explanation:
To what are multiple servers arranged in racks related?
A: clouds
B: Microsoft Visio
C: data centers
D: implementation
Answer: its data centers because it points too rack servers but the only answer that sticks would be data centers
Explanation:
Answer:
Various number of servers placed in racks are related to Rack servers in data center.
Explanation:
In data center commonly used server is Rack servers. Servers are being arranged in the mounted racks are generally called as rack servers in the data center. Internal fans are being fitted inside the racks make the servers to make a good airflow and maintain the cooling. There are different types of racks available the user can choose based on their requirement.
Brainliest please
Part A
Step 1 Starting at MIDNIGHT, (12:01am) ending 3 days later (72hr) at MIDNIGHT (11:59pm) You can start any day of the week, upto Sat Mar 04.
For a minimum of 3 consecutive days monitor the time you spend doing the 8 different activities listed below
NOTE: Avoid using weekends only in your monitoring and try to stay with mid-week,
e.g. Tues, Wed, Thurs, where majority of days are mid-week.
Use the attached time sheets to record blocks of time. Round off to the nearest hour. Precision isn’t the goal. e.g. 2hrs and 20 minutes, would be rounded down to 2 hours. 2 hrs and 30 minutes would be rounded up to 3 hrs.
The full 24 hours of each day must be accounted for.
The following 8 categories are recommended to cover the majority of possible activities one might perform in the course of a day.
Sleep
Personal maintenance (showers, laundry, housecleaning, grocery shopping, family requirements etc.)
Travel (to work, to school, or for appointments)
Work hours (total hours at the workplace, excluding lunch or breaks)
School (total hours in classes, plus time spent, studying, re-writing notes, completing assignments, time on blackboard)
Fitness (formal or informal, attending the gym or walking home from work)
Recreation (other than fitness related, TV, Movies, Leisure reading, online shopping, crafts, Video games, children’s sports activities, dates, coffee meet ups)
Volunteer activities (United Way, Big Brothers/Sisters, your religious institution activities, PTA with schools)
Three day's activities
Time day day day
Activities Activities Activities
12:01-
1:00am
1:00am-
2:00am
2:00am-
3:00am
3:00am-
4:00am
4:00am
5:00am
5:00am-
6:00am
6:00am=
7:00am
7:00am-
8:00am
8:00am-
9:00am
9:00am-
10:00am
10:00am
11:00am
11:00am-
12:00pm
12:00pm
1:00pm
1:00pm-
2:00pm
2:00pm-
13:00pm
3:00pm-
4:00pm
4:00pm-
5:00pm
5:00pm-
6:00pm
6:00pm-
7:00pm
17:00pm-
8:00pm
8:00pm-
9:00pm
9:00pm-
10:00pm
10 00pm
11:00pm
11:00pm-
11:59pm
Here is an example of a three-day activity log:
The Activity LogDay 1:
Time Sleep Personal Travel Work School Fitness Recreation Volunteer
12:01-1:00 1
1:00-2:00 1
2:00-3:00 1
3:00-4:00 1
4:00-5:00 1
5:00-6:00 1 1
6:00-7:00 1 1
7:00-8:00 1 1
8:00-9:00 1 1
9:00-10:00 1 1
10:00-11:00 1 1
11:00-12:00 1 1
12:00-1:00 1
1:00-2:00 1
2:00-3:00 1
Day 2:
Time Sleep Personal Travel Work School Fitness Recreation Volunteer
12:01-1:00 1
1:00-2:00 1
2:00-3:00 1
3:00-4:00 1
4:00-5:00 1
5:00-6:00 1 1
6:00-7:00 1 1
7:00-8:00 1 1
8:00-9:00 1 1
9:00-10:00 1 1
10:00-11:00 1 1
11:00-12:00 1 1
12:00-1:00 1
1:00-2:00 1
2:00-3:00 1
Day 3:
Time Sleep Personal Travel Work School Fitness Recreation Volunteer
12:01-1:00 1
1:00-2:00 1
2:00-3:00 1
3:00-4:00 1
4:00-5:00 1
5:00-6:00 1 1
6:00-7:00 1 1
7:00-8:00 1 1
8:00-9:00 1 1
9:00-10:00 1 1
10:00-11:00 1 1
11:00-12:00 1 1
12:00-1:00 1
1:00-2:00 1
2:00-3:00 1
Note: The actual activities and time allocation would depend on the individual's personal and work life. This is just an example to illustrate how the log can be filled out.
It's important to be honest and accurate while filling out the log to get the most benefit from it.
Read more about activity logs here:
https://brainly.com/question/8052360
#SPJ1
221 HW4 Ch 21
Question 6 of 10
- / 1
Prepare a cost reconciliation schedule. (Round unit costs to 2 decimal places, e.g. 2.25 and final answers to 0 decimal places, e.g. 125.)
Cost Reconciliation
Cost accounted for
Transferred out
$
Work in process
Materials
$
Conversion costs
Total cost accounted for
$
eTextbook and Media
The cost reconciliation schedule:
Cost accounted for Transferred out $54,000Work in process Materials $36,000Conversion costs $25,500Total cost accounted for $115,500eTextbook and Media $0Transferred out: The transferred out cost is the sum of the materials, labor, and overhead. In this case, it is $36,000 (materials) + $88,500 (labor) + $54,000 (overhead) = $178,500.
Work in process - Materials: The work in process cost for materials is $36,000.
Conversion costs - Work in process: The work in process cost for conversion costs is calculated by multiplying the percentage of completion for conversion costs (50%) by the equivalent units of production for conversion costs (57,000). Therefore, it is 0.5 * 57,000 = $28,500.
Total cost accounted for: The total cost accounted for is the sum of the transferred out cost, work in process cost for materials, and work in process cost for conversion costs. In this case, it is $54,000 + $36,000 + $25,500 = $115,500.
eTextbook and Media: The cost of eTextbook and Media is not specified in the provided information. If there is no cost associated with eTextbook and Media, it would be $0.
For such more question on reconciliation:
https://brainly.com/question/15525383
#SPJ8
What is a method that managers can use to motivate employees?
1.Encouraging employees to specialize
2.Investing in new technology
3.Offering performance-based financial rewards
4.Sharing customer information with employees
A method that managers can use to motivate employee is offering performance-based financial rewards.
What is motivation?Motivation is the process that guides and keeps people towards ensuring set goals are meet. It is what keeps one going, which act as encourage and spur one to do more.
Managers always want an improved performance from their employees. One of the method they use is to offer them performance-based financial rewards if they are able to meet and exceed certain targets.
Hence, a method that managers can use to motivate employee is offering performance-based financial rewards.
Learn more about motivation here : https://brainly.com/question/11871721
Let MAC1 = 100 – 10E and MAC2 = 50 – 10E. Graph each function and compute the aggregate MAC curve. Let MD = 30E, compute the socially efficient equilibrium. For the equations given above, suppose the government sets the pollution level at four units. What are the net social costs of this policy?
Suppose a technological change occurs that reduces the marginal costs of abatement for polluter 1 in the above equation to that of polluter 2. How does this affect the socially efficient level of pollution? Solve numerically and graphically.
If the marginal costs of abatement for polluter 1 become equal to polluter 2, it does not impact the socially efficient level of pollution. The level is still determined by equating Marginal Damage with the Aggregate MAC.
To graph each function, we can plot MAC1 and MAC2 on a graph with the quantity of emissions (E) on the x-axis and the marginal abatement cost (MAC) on the y-axis.
For MAC1: MAC1 = 100 - 10E
For MAC2: MAC2 = 50 - 10E
To compute the aggregate MAC curve, we add the individual MAC curves together. So, Aggregate MAC = MAC1 + MAC2.
Aggregate MAC = (100 - 10E) + (50 - 10E) = 150 - 20E
Now, let's calculate the socially efficient equilibrium by setting the Marginal Damage (MD) equal to the Aggregate MAC.
MD = Aggregate MAC
30E = 150 - 20E
Simplifying the equation, we get:
50E = 150
E = 3
Therefore, the socially efficient equilibrium occurs when the quantity of emissions (E) is 3.
Now, let's calculate the net social costs of the policy when the government sets the pollution level at four units.
Net social costs = Aggregate MAC - MD
Net social costs = (150 - 20(4)) - (30(4))
Net social costs = 110 - 120
Net social costs = -10
The net social costs of this policy would be -10, indicating a net benefit to society.
If a technological change occurs that reduces the marginal costs of abatement for polluter 1 to that of polluter 2, it means that MAC1 will become equal to MAC2.
Setting MAC1 equal to MAC2:
100 - 10E = 50 - 10E
Simplifying the equation, we find that E can have any value, as both sides are equal.
Graphically, this change would mean that MAC1 and MAC2 become parallel lines on the graph, with the same slope and intercept. The socially efficient level of pollution would still be determined by equating MD with the aggregate MAC.
In conclusion, if the marginal costs of abatement for polluter 1 become equal to polluter 2, it does not affect the socially efficient level of pollution. The socially efficient level is still determined by equating the Marginal Damage with the Aggregate MAC, regardless of the marginal costs of individual polluters.
For more question on marginal visit:
https://brainly.com/question/14867207
#SPJ8
Elliot, Inc., uses the high-low method to analyze cost behavior. The company observed that at 20,000 machine hours of activity, total maintenance costs averaged $10.50 per hour. When activity jumped to 24,000 machine hours, which was still within the relevant range, the average total cost per machine hour was $9.75. On the basis of this information, the company's fixed maintenance costs were:
Answer:
$90,000
Explanation:
At the activity level of 20,000 machine hours:
total maintenance costs=20,000* $10.50=$210,000
At the activity level of 24,000 machine hours:
total maintenance costs=24,000*$9.75=$234,000
variable maintenance cost per hour=(total maintenance costs at higher activity level-total maintenance costs at lower activity level)/(higher activity level-lower activity level)
variable maintenance cost per hour=($234,000-$210,000)/(24000-20000)
variable maintenance cost per unit=$6
Using the higher activity level data:
total cost=fixed cost+(variable maintenance cost per unit*number of hours)
$234,000=fixed cost+($6*24000)
234,000=fixed cost+$144,000
fixed cost=$234,000-$144,000
fixed cost=$90,000
What was the largest deduction for this pay period? ngpf
The largest deduction for a pay period is the B. Federal tax.
What is the Federal tax about?The Internal Revenue Service (IRS) levies a tax on the annual earnings of individuals, businesses, trusts, and other legal entities in the United States.
Wages, salaries, commissions, bonuses, tips, investment income, and certain types of unearned income are all subject to federal income taxes as part of a taxpayer's taxable income.
Individual federal income tax rates in the United States are progressive, which means that as taxable income rises, so does the tax rate. Federal income tax rates range from 10% to 37% and are levied at various income levels. Tax brackets are the income ranges to which the rates apply. Income in each tax group is taxed at the associated rate.
The complete question is given below.
Learn more about tax on:
https://brainly.com/question/25783927
#SPJ1
What was the largest deduction for a pay period?
Medicare Tax
Federal Tax
State Tax
Retirement
Casino Inc. is expected to pay a dividend of $3 per share at the end of year-1 (D1) and these dividends are expected to grow at a constant rate of 6% per year forever. If the required rate of return on the stock is 18%, what is current value of the stock today
Answer:
$25
Explanation:
Calculation to determine what is current value of the stock today
Using this formula
P0= Div1/(r - g)
Let plug in the formula
P0= (3/(0.18 - 0.06))
P0= $25
Therefore current value of the stock today is $25
(GIVING BRAINLIEST AS SOON AS I CAN!!)
In her role as an administrative professional, Martina is learning about different types of business letters she might be asked to type. Which is MOST likely to be requested by her manager?
A: acceptance letter
B: Dear John letter
C: happy birthday letter
D: chain letter
What is the difference between final goods and intermediate goods?
A) Final goods are goods that are purchased by the end-consumer or user for their personal consumption or use.
B) Intermediate goods, on the other hand, are goods that are used as inputs in the production of other goods.
Final goods and intermediate goods are terms used in economics to distinguish between different types of goods in the production process. Here's a breakdown of the difference between the two:
1. Final Goods:
Final goods are goods that are purchased by the end-consumer or user for their personal consumption or use. These goods are ready for consumption and do not undergo further processing or transformation before reaching the final consumer. Examples of final goods include food products, clothing, electronics, furniture, and vehicles. Final goods are the end result of the production process and are intended for final consumption or use.
2. Intermediate Goods:
Intermediate goods, on the other hand, are goods that are used as inputs in the production of other goods. They are not intended for final consumption but are instead used as raw materials, components, or capital goods in the production process. Intermediate goods undergo further processing or transformation before being included in the final goods. Examples of intermediate goods include raw materials like steel or wood, components like circuit boards or engines, and machinery or equipment used in production.
The key distinction between final goods and intermediate goods lies in their purpose and stage in the production process. Final goods are produced for the ultimate satisfaction of consumers' needs and are ready for consumption, while intermediate goods are used in the production of other goods and undergo further processing.
It's important to note that when calculating a country's Gross Domestic Product (GDP), only the value of final goods is considered. Intermediate goods are excluded to avoid double-counting, as their value is already included in the final goods they contribute to. By focusing on final goods, GDP provides a measure of the value of goods and services produced for final consumption in an economy.
for more such question on goods visit
https://brainly.com/question/25262030
#SPJ8