In a television set an electron beam with a current of 5x10^-6 ampere is directed at the screen. Approximately how many electrons are transferred to the screen in 60 seconds?

Answer:

Resistance = 360,000 Ω = 360 kΩ

Tolerance = +/- 5%

Explanation:

You can follow a four-band resistor chart to determine resistance and tolerance based off each column.

1st Band = Orange = 3

2nd Band = Blue = 6

3rd Band = Yellow = 10,000 Ω (this is the multiplier)

Resistance = 36 * 10,000 Ω = 360,000 Ω = 360 kΩ

4th Band = Gold = +/- 5% Tolerance

First, prioritize your safety and remain calm. Immediately pull over to a safe location and turn off the engine. Evacuate yourself and any passengers from the vehicle, ensuring everyone moves away from the flames.

If your vehicle's engine compartment catches fire while you're driving, your immediate actions are crucial for your safety. Firstly, it's vital to remain calm and safely maneuver your car to the side of the road, signaling your intention to other drivers. Secondly, swiftly turn off the engine to stop the fuel supply and prevent the fire from spreading. This action also reduces the risk of additional fuel igniting.

Lastly, promptly exit the vehicle and move to a safe distance away from the fire, ensuring your personal safety. Immediately dial emergency services to report the incident and request professional assistance. Remember, in such emergencies, time is of the essence, so act quickly and responsibly.

Learn more about Vehicle's engine

brainly.com/question/2758132

#SPJ11

The benefits of observing good safety measures in relation to an increase in productivity within a pharmaceutical laboratory is that:

A laboratory is known to be one that is known to have a lot of potential risks that is said to often arise due to  a person's exposure to chemicals that are corrosive and toxic, flammable solvents, high pressure gases and others.

So,  A little care and working in line to all the prescribed safety guidelines will help a person to be able to avoid laboratory mishaps.

Therefore, the act of adhering to all these policies helps a lot of employees to hinder the  spills of chemicals and other kinds of  accidents, as well as reduce the damage to the environment that is outside of the lab.

Hence, The benefits of observing good safety measures in relation to an increase in productivity within a pharmaceutical laboratory is that:

Learn more about safety measures  from

https://brainly.com/question/26264740

#SPJ1

Answer:

Education and training I did the TEST and got it right.

Of the core elements of successful safety and health programs, the other one aside the given two that relates to individual roles is;

Education and Training Program.

According to OSHA(Occupational Safety and Health Administration), there are 7 core elements of an effective safety and health program.

These 7 core elements are namely;

1) Management Leadership.

2) Worker Participation.

3) Hazard Identification & Assessment.

4) Hazard Prevention & Control.

5) Education & Training Program.

6) Evaluation & Improvement.

7) Management of Contractors / Staffed Employees.

Now, we have been given 2 of the 7 which are Management leadership and

worker participation. However, we are told to find another one that relates

to individual roles. The only other one that is individual specific is Education

and Training program because it is the responsibility of every staff from top

to bottom to know all about safety.

Read more at; https://brainly.com/question/21555575

The statement "Single-strand (or solid) aluminum branch circuit wiring observed by a home inspector should always be fully evaluated by a licensed electrical contractor" is definitely true.

An electrical circuit may be defined as a complete path through which an electric current continuously flows when the switch is in on state. It is an enclosed system of current flowing.

The quality of each and every wire does not matter if it is made up of aluminum or copper should be monitored by a high level of engineers and then a license has to be issued to that wiring company on the behalf of an electrical contractor.

Therefore, it is well described above.

To learn more about Electrical contractors, refer to the link:

https://brainly.com/question/24014509

#SPJ1

Answer:

scissors best way 100%

Explanation:

The flap is used to lift the aircraft in the air as it provides them with balance.

The flaps' main function is to produce additional pull during decreased airspeed, therefore allowing the aircraft to fly at much low rpm with a reduced chance of crashing.

The flap is used to lift the aircraft in the air as it provides them with balance.

They are used for dragging the aircraft as it provides them with a certain amount of height with increases and lowers it.

The takeoff speed is slowed so relatedly to the flap as the change in the structure for the dynamic effect of the airspeed.

Flap reduces the takeoff distance as a smaller speed is being created, which reduces the feed with the coefficient of lift.

The class have a chamber it provides some hollow stairs through which they can store the good and services also it is sometimes used for oil storage.

Learn more about flaps, here:

https://brainly.com/question/17853240

#SPJ1

Answer:

\(250\ \text{lbm/min}\)

\(625\ \text{ft/min}\)

Explanation:

\(A_1\) = Area of section 1 = \(10\ \text{ft}^2\)

\(V_1\) = Velocity of water at section 1 = 100 ft/min

\(v_1\) = Specific volume at section 1 = \(4\ \text{ft}^3/\text{lbm}\)

\(\rho\) = Density of fluid = \(0.2\ \text{lb/ft}^3\)

\(A_2\) = Area of section 2 = \(2\ \text{ft}^2\)

Mass flow rate is given by

\(m=\rho A_1V_1=\dfrac{A_1V_1}{v_1}\\\Rightarrow m=\dfrac{10\times 100}{4}\\\Rightarrow m=250\ \text{lbm/min}\)

The mass flow rate through the pipe is \(250\ \text{lbm/min}\)

As the mass flowing through the pipe is conserved we know that the mass flow rate at section 2 will be the same as section 1

\(m=\rho A_2V_2\\\Rightarrow V_2=\dfrac{m}{\rho A_2}\\\Rightarrow V_2=\dfrac{250}{0.2\times 2}\\\Rightarrow V_2=625\ \text{ft/min}\)

The speed at section 2 is \(625\ \text{ft/min}\).

(a) The mass flow rate will be "250 lbm/min".

(b) At section 2, the speed will be "625 ft/min".

According to the question,

Section 1 area, A₁ = 10 ft²

Section 2 area, A₂ = 2 ft²

Water's velocity, V₁ = 100 ft/min

Volume at section 1, v₁ = 4 ft³/lbm

(a) We know the formula,

Mass flow rate, m = ρA₁V₁

                              = \(\frac{A_1 V_1}{v_1}\)

By substituting the values,

                              = \(\frac{10\times 100}{4}\)

                              = \(\frac{1000}{4}\)

                              = 250 lbm/min

(2) The speed will be:

→ m = ρA₂V₂

or,

  V₂ = \(\frac{m}{\rho A_2}\)

By substituting the values,

       = \(\frac{250}{0.2\times 2}\)

       = \(\frac{200}{0.4}\)

       = 625 ft/min

Thus the responses above are correct.  

Find out more information about speed here:

https://brainly.com/question/4931057

A blue orange may be more difficult to represent by the developed brain compared to an orange-colored orange due to the mismatch between the expected color association and the perceived color.

This example highlights the challenges of representing an object with an unconventional or unexpected color, which can inform the localist versus distributed debate in terms of how the brain processes and represents sensory information.

The human brain has developed associations between certain objects and their typical colors based on prior experiences and learned associations. For example, oranges are commonly associated with the color orange. When encountering an orange-colored orange, the brain can easily match the perceived color with the expected color association.

However, when presented with a blue orange, there is a mismatch between the expected color association (orange) and the perceived color (blue). This discrepancy can lead to cognitive processing difficulties as the brain tries to reconcile the unexpected color with the known object. The representation of the blue-orange may be more challenging because it requires overriding the preexisting color association and establishing a new color-object association.

This example informs the localist versus distributed debate, which pertains to how sensory information is processed and represented in the brain. The localist perspective suggests that specific representations are localized to distinct brain regions, while the distributed perspective proposes that representations are distributed across multiple brain regions. The difficulty in representing a blue orange demonstrates the complexities involved in integrating and reconciling conflicting sensory information, supporting the argument for a distributed processing approach where multiple brain regions work together to form representations.

Learn more about sensory information here:

https://brainly.com/question/10289156

#SPJ11

The  first thing a technician need to check if a new drive is not recognized by the operating system are:

The issues on how to fix it are:

Hence, The  first thing a technician need to check if a new drive is not recognized by the operating system are:

Learn more about operating system from

https://brainly.com/question/22811693

#SPJ1

The landfill has a volume of 16.2ha * 10m = 162,000m³.

Each week, 765m³ of waste is dumped, which is compacted to half its volume, so 382.5m³ is added weekly.

Annually, this amounts to 382.5m³/week * 52 weeks = 19,890m³/year.

With a total volume of 162,000m³ and an annual addition of 19,890m³, the expected life of the landfill can be estimated by dividing the total volume by the annual addition: 162,000m³ / 19,890m³/year ≈ 8.14 years.

Mass balance diagram: [Landfill (162,000m³)] <-- [382.5m³/week of compacted waste]

Read more about landfill here:

https://brainly.com/question/12745559

#SPJ1

Where you own two pottery stores in your city and you want to find the number of two particular vase colors (color) sold in both stores (location) each week (for each week). If are not interested in the sum total, note that the bar graph you should select to compare the data between both stores is: the "Stacked Bar Chart" (Option A)

When comparing data points, a stacked bar chart is generally simpler to notice the comparison than a combined chart.

When data points are stacked on top of each other, it is easier to discern the percentage of each data point relative to the total value.

Learn more about Stacked Bar Chart:
https://brainly.com/question/28903290
#SPJ1

A decreasing returns to scale occurs when the proportion of output is less than the desired increased input during the production process.

Any business must have a production process. It is a procedure for transforming unfinished goods and concepts into finished goods and services. Because they have a significant impact on corporate success, it is crucial to design efficient and effective manufacturing procedures. The quantity used in the producing process is considered capital. Investments might take the form of financial investments or tangible assets like machinery, vehicles, etc. When we talk about labour, we mean the individuals and the time and effort they invested in the process. The term "technology" refers to all forms of technology employed in the production process, including the type of machinery, its programming, its capabilities, etc.Natural resources needed in production, such as land, energy, and others, are referred to as "land."

Learn more about returns to scale here:

https://brainly.com/question/28985721

#SPJ4

Technical practice incorporates build-time identification of security vulnerabilities in the code is  Penetration testing.

A penetration test, sometimes referred to as a pen test or ethical hacking, is a legitimate simulated cyberattack on a computer system that is carried out to analyze the system's security. This is distinct from a vulnerability assessment.

In order to identify and illustrate the financial effects of a system's vulnerabilities, penetration testers employ the same tools, strategies, and procedures as attackers. Reconnaissance, scanning, vulnerability assessment, exploitation, and reporting are the five stages of a penetration test.

Penetration testing is a technical activity that includes build-time discovery of security vulnerabilities in the code.

Penetration tests are essential to an organization's security because they teach staff members how to respond to any kind of intrusion from a malicious party. Pen tests are a method of determining whether a company's security procedures are actually effective.

To learn more about Penetrating Testing, refer to:

https://brainly.com/question/26555003

#SPJ4

Answer:

Compressive strength of bricks is the capacity of brick to resist or withstand under compression when tested on Compressive testing machine [CTM]. The Compressive strength of a material is determined by the ability of the material to resist failure in the form of cracks and fissure.

Explanation:

If you want to know more, refer to this link:

https://civilread.com/compressive-strength-test-on-brick/#:~:text=Compressive%20strength%20of%20bricks%20is,form%20of%20cracks%20and%20fissure.

Answer:

I got iron

Explanation:

on my plato test

Answer:

Area of the piston = 1.143 * 10^-3 m^2

Explanation:

Here, we are tasked with calculating the area of the piston.

Mathematically, the area of the piston =

Piston force/ cylinder pressure

From the question,

Piston force = mg where m is the mass of the piston = 35 kg and g is the acceleration due to gravity = 9.8 m/s^2

Thus, piston force = 35 * 9.8 = 343 N

Now the pressure gauge reads 300 KPa and 1KPa = 300 * 10^3 Pa = 300000 Pa

Thus, the area of the piston = 343/300000 =

0.001143333333 m^2 which is simply 1.143 * 10^-3 m^2

Answer:

Automation generally means “a process performed without human assistance”, while autonomy implies “satisfactory performance under significant uncertainties in the environment and the ability to compensate for system failures without external intervention [emphasis mine].”

Explanation:

Answer:

The correct option is - A categorical syllogism argues that A and B are both members of C whereas a conditional syllogism argues that if A is true then B is also true.

Explanation:

As,

Categorical syllogisms follow an "If A is part of C, then B is part of C" logic.

Conditional syllogisms follow an "If A is true, then B is true" pattern of logic.

So,

The correct option is - A categorical syllogism argues that A and B are both members of C whereas a conditional syllogism argues that if A is true then B is also true.

If your accelerator gets stuck down, do the following:

Shift to neutral.

Apply the brakes.

Keep your eyes on the road and look for a way out.

Warn other drivers by blinking and flashing your hazard lights.

Try to drive the car safely off the road.

Turn off the ignition when you no longer need to change direction.

Answer:Kick the accelerator to dislodge it

Explanation:

Never reach down with your hand while driving, it's not safe.

Answer:verify proper cable is hooked between laptop and projector. HDMI ports or 15 pin video output to input.

And laptop is selected to output to respective video output.

Explanation:

Answer: 25 ft

Explanation:

For a triangle, the area is given by

A = (1/2)base*height

Rearranging,

base = 2A/height

Substituting the given values,

base = 2(350 ft^2)/(28 ft) = 25 ft

Answer:

a. Falls

Explanation:

plato

Complete Question:

Problem 8 Determine the horsepower required to compress 1 lbm/min of ethylene oxide from 70 °F and 1 atm to 250 psia. The compressor has an efficiency of 75%. The molar heat capacity of ethylene oxide is given by

C_p=10.03+0.0184T  C_p[=]Btu/lbmole- "F ; T[=] °F C,

Answer:

\(P'=0.377hp\)

Explanation:

From the question we are told that:

Initial Temperature T_1=70 F

Final Temperature \(T_2=250pisa =114.94F\)

Efficiency \(E=75\%=0.75\)

Generally the equation for Work-done  is mathematically given by

 \(W=\int C_pT\)

 \(W=10.03(114.94-70 )+0.0184((114.94)^2-70^2 )\)

 \(W=527.21btu/ibmole\)

 \(W=11.982btu/ibm\)

Generally the equation for Efficiency  is mathematically given by

 \(E=\frac{isotropic Power}{Actual P'}\)

 \(E=\frac{P}{P'}\)

Since

Isotropic Power

  \(P=0.0167*11.982btu/ibm\)

 \(P=0.2btu/s\)

Therefore

 \(P'=\frac{0.2}{0.75}\)

 \(P'=0266btu/s\)

Since

 \(1btu/s=1.4148hp\)

Therefore

 \(P'=0.377hp\)

Answer:

Not skipping steps ensures that the best possible design is chosen and developed.

Explanation:

Engineers should not skip any step to ensure the best possible design is chosen and developed.

Answer:

Not skipping steps ensures that the best possible design is chosen and developed.

Explanation:

How fast is the fastest wind tunnel?

The JF-22 wind tunnel, which would be the fastest in the world, would be situated in the Huairou District of northern Beijing and be capable of simulating flights at speeds of up to 10 km/s, or 30 times the speed of sound.

Learn more about wind tunnels here:

brainly.com/question/15561541

#SPJ4

Answer:

Answer is 3.2 Ω (Ohms)

Explanation:

From Ohms Law I = V/R

R = V(I)

R = 8(0.4)

R = 3.2

The resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V is 3.2 ohm.

According to Ohm's law, when all other physical parameters, including temperature, are held constant, the voltage across a conductor is directly proportional to the current flowing through it.

According to Ohm's Law, the electrical current I flowing through a particular conductor is precisely proportional to the potential difference (voltage) V across its ends (assuming that the conductor's physical properties, such as its temperature and pressure, stay constant). where R is a proportionality constant.

Given:

Current, I= 0.4 A

Voltage, V= 8 V

Using Ohm's Law

V= IR

I = V/R

R = V(I)

R = 8(0.4)

R = 3.2 ohm

Hence, the resistance of a lamp if the current through it is 0.4 A and the voltage across it is 8 V is 3.2 ohm.

Learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ5