in us v decoster, the defedants company stuffered from an extremely serious salmonella

n

e

g

r

o

means black in spanish!

a. True. Because these activities require very little processing power. A basic processor such as an Intel Celeron or AMD Athlon will be more than sufficient for most web browsing and email-checking tasks.

A processor is a part of a computer that carries out operations and carries out instructions. It is in charge of carrying out the calculations and data manipulation necessary for a computer to work. It is the most crucial part of a computer system and is frequently referred to as the "brain" of the computer.

The processor contains an Arithmetic Logic Unit (ALU) which is responsible for carrying out arithmetic and logical operations. It also contains a Control Unit (CU) which is responsible for managing the flow of instructions and data to and from the various components of the computer.

The processor also contains a number of registers which are used to store intermediate results during calculations. The processor also contains several cache levels, which are used to store frequently accessed data and instructions in order to speed up the execution of programs.

Learn more about processor here:

https://brainly.com/question/614196

#SPJ1

1) the source voltage Vs referred to the low voltage side is Vs = 480 V

2) the transmission line current iTL is 26.67 - j20 A

3) the load current il is  0.00833 + j0.00625 A

4) the voltage drop across the transmission line Vdrop is 4.8006 + j5.3248 V

5) the load voltage VL is 48 V

To solve the given problem, we'll use the given information and apply relevant formulas. Let's go through each step:

1) Finding the source voltage Vs referred to the low voltage side:

We know that the turns ratio of the transformer is 10:1. Therefore, the voltage transformation ratio is also 10:1. So, we can write:

Vs/V2 = Ns/N2 = 10

Vs/4800 = 10

Vs = 4800/10

Vs = 480 V

2) Finding the transmission line current iTL:

The transmission line current can be calculated using Ohm's Law:

iTL = V2 / Zline

iTL = 4800 / (0.18 + j0.24)

iTL = (4800 / 0.18) - j(4800 / 0.24)

iTL = 26.67 - j20

3) Finding the load current il:

To find the load current, we can use the apparent power formula:

S = V * I*

Where S is the complex power, V is the voltage, and I* is the conjugate of the current.

Given that the apparent power S is 4 + j3 VA, and the voltage V is 480 V, we can solve for the load current il:

4 + j3 = 480 * il*

il = (4 + j3) / 480

il = (4/480) + (j3/480)

il = 0.00833 + j0.00625

4) Finding the voltage drop across the transmission line:

The voltage drop across the transmission line can be calculated using Ohm's Law:

Vdrop = iTL * Zline

Vdrop = (26.67 - j20) * (0.18 + j0.24)

Vdrop = (26.67 * 0.18) + j(26.67 * 0.24) - j(20 * 0.18) - 0.24 * 20

Vdrop = 4.8006 + j5.3248

5) Finding the load voltage VL:

The load voltage can be calculated using the voltage transformation ratio:

VL/Vs = N2/N1 = 1/10

VL/480 = 1/10

VL = 480/10

VL = 48 V

So, the answers to the given questions are as follows:

Learn more about transmission line at https://brainly.com/question/33214997

#SPJ1

Answer:

Aluminum cross sectional area = 1.99 * 10^-5 mm^2

Steel cross sectional area = 9.95* 10^-6 mm^2

Explanation:

Given data:

Tensile strength of Grunerite = 3.5 * 10^2 kg/mm^2 = 3.5 * 10^-4 kg/um^2

Tensile strength of Aluminum = 2.5 × 10^4 lb/in2 =  2.5 × 10^4 * 703.07 kg/m^2

Tensile strength of Steel number 5137 = 5.0 × 10^4 lb/in2 = 5.0 × 10^4*703.07 kg/m^2

Calculating the cross sectional area of the wires of aluminum and steel No5137

first we will determine the cross sectional area of the aluminum wire ( A ) by equating tensile strength of aluminum with the tensile strength

of Grunerite

(2.5 × 10^4 * 703.07)  * A = 3.5 * 10^-4 kg

Hence ; A = 1.99 * 10^-5 mm^2

Next we calculate the cross sectional area of steel

5.0 × 10^4*703.07 kg/m^2 * A" = 3.5 * 10^-4 kg

Hence ; A" = 9.95* 10^-6 mm^2

Answer:

The Dependent Variable is the Effect, Its value depends on changes from the Independent Variable

Hope this Helps

Answer:

True

Explanation:

Atmospheric science is studying of the Earth's atmosphere. Meteorology includes atmospheric chemistry and atmospheric physics with a major focus on weather forecasting.

Answer:

The other person is Correct the answer is true

Explanation:

Welding fumes can cause serious health problems for workers if inhaled, according to OSHA.

To learn more about harmful refer to:

https://brainly.com/question/17143947

#SPJ4

Answer:

a. True

Explanation:

Answer: chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/http://www.velhightech.com/Documents/ME8391%20Engineering%20Thermo%20Dynamics.pdf

click this link for the best explaination

Explanation:

Sand has a diameter range of.0187 inches to.003 inches. Silt is less than.0029 inches in size. Clay particles are frequently a smaller and smaller than.0029 inches. The form of clay is flat rather than spherical.

Sand is a grainy substance made up of tiny mineral fragments. Sand's composition varies, but what sets it apart is the size of the grains. Sand contains smaller grains that gravel and is coarser to silt.

Due to the fact that sand is denser than water, a speck of dust would sink. The sand will weight heavier than the water if you were to weigh a tiny bit of water with the same size as a grain of sand. The sand consequently sinks.

To know more about sand visit:

https://brainly.com/question/20554560

#SPJ1

Besides the HEV and EV motor systems themselves, the other systems that may use high voltage are:

1. Air conditioning compressor.

4. Electric water pump.

In a hybrid electric vehicle (HEV) or an electric vehicle (EV), high voltage is used in certain systems to increase the efficiency and improve the performance of the vehicle.

The air conditioning compressor, for example, may use a high voltage system to power its electric motor, which in turn drives the compressor. By using high voltage, the air conditioning system can operate more efficiently and use less energy, improving the overall efficiency of the vehicle.

Similarly, an electric water pump in an HEV or EV may also use high voltage to improve its performance. The high voltage system allows the pump to operate more efficiently and use less energy, which can help to conserve the vehicle's battery power and improve its range.

Learn more about EVmotor systems form

https://brainly.com/question/27985518

#SPJ1

See transcribed text below



Besides the HEV and EV motor systems themselves, what other systems may use high voltage (check all that apply)?

Air conditioning compressor.

Electric power steering.

Auxiliary battery.

Electric water pump.

Answer:

Not seeing any other information, the best answer I can give is 2m.

Explanation:

M = magnitude

You see, if they have an equal charge, and you add them, it'd be 2 * m, or 2m.

If control requirements are very complex or extensive, a: A. Master sequencer can be installed.

A master sequencer is a device that controls multiple circuits in a predetermined sequence. It is commonly used in industrial settings where multiple machines or systems need to be turned on or off in a specific order.  A master sequencer can be programmed to turn on and off circuits at specific times, or based on certain conditions. This allows for precise control of complex systems, and can help prevent equipment damage or failures.

Additionally, a master sequencer can provide a level of safety by ensuring that certain circuits are turned off before others are turned on, reducing the risk of accidents or injuries. Overall, a master sequencer is a valuable tool for controlling complex systems in industrial or commercial settings. So the answer is A. Master sequencer.

Learn more about Master sequencer: https://brainly.com/question/13726388

#SPJ11

Answer:

Precision

Explanation

You know the answer is precision because it uses the word range and plus because I just answered this question and got it correct.

.

Answer:

in the previous sections you have seen that any real number have been the symbol of expenses have asked to represent it on the number line literacy house suppose you want to locate on the number line we know that this line is between two entry so let us look closely at the portions of the number line between between 2 to 25 by 50 bye-bye 2.00 with this into 5

False. Concrete-encased electrodes can also be used in existing structures as long as they meet certain requirements.

The National Electrical Code (NEC) allows for the use of concrete-encased electrodes as a grounding electrode system for existing structures, provided that the concrete is encased in at least 2 inches of concrete and is located within and near the bottom of a foundation or footing that is in direct contact with the earth.

Additionally, the concrete-encased electrode must be at least 20 feet in length and must be electrically connected to the grounding electrode system of the building. So, while concrete-encased electrodes are commonly used in new construction, they can also be used in existing structures if they meet these requirements.

To know more about electrodes  visit:-

https://brainly.com/question/29667817

#SPJ11

The starter gear disengages from the car's flywheel to avoid slowing down the engine. The correct option is D. slowing down the engine.

When a car is starting, the starter motor engages with the flywheel to crank the engine and initiate its rotation. The starter gear is designed to mesh with the flywheel teeth and transfer the rotational force from the starter motor to the engine.

Once the engine successfully starts and is running on its own power, it no longer requires the assistance of the starter motor. Keeping the starter gear engaged with the flywheel would create unnecessary friction and resistance, which could negatively impact the engine's performance and potentially cause damage to both the starter motor and the flywheel.

To prevent these issues, the starter gear is designed to disengage from the flywheel once the engine starts. This disengagement allows the engine to run independently, without any interference from the starter motor. By disengaging the starter gear, the engine can freely rotate without the added resistance of the starter gear, ensuring optimal performance and preventing any potential damage. The correct option is D. slowing down the engine.

Learn more about starter gear visit:

https://brainly.com/question/28576658

#SPJ11

The correct answer is (a) This is illegal, as only licensed individuals may do design work.

The reason being that engineering plans and specifications for the design of commercial buildings are considered to be a part of the professional engineering services, which can only be performed by licensed individuals. This is because such work involves a high level of technical expertise, knowledge, and experience, which only licensed professionals possess. Employing unlicensed individuals to do such work is a violation of the law and can lead to serious legal consequences. Therefore, it is important for licensed civil engineers to ensure that all the work is done by licensed professionals or under their responsible charge, to avoid any legal or professional liabilities.

learn more about design work here:

https://brainly.com/question/2643754

#SPJ11

Answer:

The major financial flop that led to the end of the Sega Dreamcast and ultimately caused Sega to stop making game consoles altogether is:

3: A game called Shenmue, that cost more than $70 million to make, meant that everyone who owned a Dreamcast needed to buy two copies of the game just for Sega to make back the money they had spent to develop it-which didn't happen.

Explanation:

Shenmue, released on December 29, 1999, was created for Dreamcast by Suzuki.  It was widely described as the most expensive video game ever produced.  It had an estimated production and marketing cost of between US$47 and $70 million, according to the latest available data.

Answer:

I got iron

Explanation:

on my plato test

Answer:

Electrical engineering is an engineering discipline concerned with the study, design, and application of equipment, devices, and systems which use electricity, electronics, and electromagnetism. It emerged as an identifiable occupation in the latter half of the 19th century after commercialization of the electric telegraph, the telephone, and electrical power generation, distribution, and use.

Explanation:

The values of sum1 and sum2 if the operands in the expressions are evaluated left to right are; sum1 = 46 and sum2 = 48

In computer programming, the term operand is defined as the object of a mathematical operation or it is the object or quantity that is operated on.

A) If the operands in the expressions are evaluated left to right, then the values of sum1 and sum2 are;

sum1 = (10/2) + 41 = 46

sum2 = 41 + (14/2) = 48

B) If the operands in the expressions are evaluated right to left, then the values of sum1 and sum2 are;

sum1 = (14/2) + 41 = 48

sum2 = 41 + (10/2) = 46

Read more about about Operands at; https://brainly.com/question/27014457

#SPJ1

To minimize the maximum absolute value of the bending moment in the beam, the counterweight should be positioned in such a way that it counteracts the effects of the distributed load on the beam.

This can be achieved by placing the counterweight at a location where the moment caused by the distributed load is maximum. The value of the counterweight can be determined by equating the moment due to the distributed load and the moment due to the counterweight. Mathematically, this can be represented as:
\(moment_{distributed load}\) = \(moment_{counterweight}\) Once you have calculated the value of the counterweight, the maximum absolute value of the bending moment (|M|max) can be determined by analyzing the beam's bending moment diagram and finding the point where the bending moment is minimum or maximum.
Please note that to provide a specific answer, more information about the beam, such as its length, material, and the magnitude of the distributed load, is required.

Learn more about moment here: https://brainly.com/question/14140953

#SPJ11

Humanistic perspective. A psychological standpoint that focusses on the originality of the individual and believe that human beings possess an innate inclination to improve and to confine their lives through the decisions they make. Sometimes named the "third force" in psychology.

Humanistic psychology is a philosophy that emphasizes looking at the whole individual and highlights concepts such as free will, self-efficacy, and self-actualization. Rather than focusing on dysfunction, humanistic psychology aims to help people fulfill their possibility and maximize their well-being.

The humanistic perspective on character emphasizes the individualized grades of optimal well-being and the use of creative potential to help others, as well as the relational conditions that promote those grades as the outcomes of healthy development.

To learn more about humanistic perspective, refer

https://brainly.com/question/28192990

#SPJ9

Answer:

Scheduling is a process of create a structure that shows the way a schedule is organized before developing a complete and final schedule of a project.

Explanation:

This is the initial step in of developing a project schedule for a capital cost project. At this stage, the estimates for the project are done involving the various actions in the project. A lot of details are included in this  schedule showing the activities that are to be performed and the constraints involved.

Answer:

12 32

Explanation:

Answer: the modulus of elasticity of the aluminum is 75740.37 MPa

Explanation:

Given that;

Length of Aluminum bar L = 125 mm

square cross section s = 16 mm

so area of cross section of the aluminum bar is;

A = s² = 16² = 256 mm²

Tensile load acting the bar p = 66,700 N

elongation produced Δ = 0.43

so

Δ = PL / AE

we substitute

0.43 = (66,700 × 125) / (256 × E)

0.43(256 × E) = (66,700 × 125)

110.08E = 8337500

E = 8337500 / 110.08

E = 75740.37 MPa

Therefore, the modulus of elasticity of the aluminum is 75740.37 MPa

Fine motor skills typically improve during middle and late childhood due to the development of the brain and the increasing coordination of the fine muscles in the hands, fingers and wrists.

Development is the process of creating something new, or improving upon existing products, services, or processes. It involves taking an idea or concept and turning it into reality. It is the process of creating, improving, and maintaining systems, structures, and organizations. It can involve creating new products, services, processes, or improving existing ones.

As children progress through middle and late childhood, they learn to refine their movements by practicing and perfecting their fine motor skills.With practice and experience, children are able to coordinate their fine motor movements better, which leads to improved skills.

To learn more about development

https://brainly.com/question/13164167

#SPJ4

Answer:

Water enters and leaves the 6-cm diameter pipe bend in Fig. P3.45 at an average velocity of 8.5 m/s. The horizontal force to support the bend against momentum change is 300 N. Find (a) the angle ϕ; and (b) the vertical force on the bend.

a) The angle \(\phi\) is 62.06°.

b) The vertical force on the bend is 180.47 N.

The weight of the water and the reaction force must be considered to determine the vertical force exerted on the bend. This analysis provides valuable insights into the behavior and structural requirements of the pipe bend in relation to the fluid flow, ensuring its proper functioning and structural integrity.

The objective is to determine two key parameters: the angle of deflection QQ of the pipe bend and the vertical force acting on it. By applying principles of fluid mechanics and equilibrium, the solution requires calculating the change in momentum of the water passing through the bend and equating it to the known horizontal force required to support the bend.

Given that,

The diameter (d)= 6 cm

The average velocity (v)=8.5 m/s

Consider the rate of change of momentum along the x-direction.

\(F_x=mass \times (\frac{Intial \ velocity-Final \ Velocity}{time})\)

\(F_x=m'[(V-(-Vcos\phi)]\)

\(F_x=\rho AV^2[1+cos\phi]\)

\(300=100\times(\frac{\pi}{4}(0.06)^2)\times(8.5)^2[(1+cos\phi)]\)

\([(1+cos\phi)]=1.4685\)

\(cos\phi=0.4685\)

\(\phi=cos^{-1}(0.4685)\)

\(\phi=62.06^{^\circ}\)

(b) Calculate the vertical force on the bend.

Consider the rate of change of momentum along the y-direction.

\(F_y=mass \times (\frac{Intial \ velocity-Final \ Velocity}{time})\)

\(F_y=m'[(0-(V-Vsin\phi)]\)

\(F_y=\rho AVsin\phi\)

\(F_y=(1000)\times(\frac{\pi}{4}(0.06)^2)\times(8.5)^2\times sin62.06^{\circ}\)

\(F_y=180.47 \ N\)

Therefore,

a) The angle \(\phi\) is 62.06°.

b) The vertical force on the bend is 180.47 N.

Learn more about the average velocity here:

https://brainly.com/question/27982972.

#SPJ3

Answer: true

Explanation: Cutoff frequency = 1/(2 *pi* R1*C) hence the cutoff frequency depends only on inpur resistance…

The claim that "in a high pass filter, the cutoff frequency is affected only by the input resistor value" is incorrect.

The statement "in a high pass filter, the cutoff frequency is affected only by the input resistor value" is FALSE. A high-pass filter is an electronic circuit that enables high-frequency signals to pass while suppressing low-frequency signals. A high-pass filter is typically used to remove the DC component of an audio signal. The high-pass filter is made up of a capacitor and a resistor that are linked in series.When the input voltage rises above the capacitive reactance (Xc), which is inversely proportional to frequency, the high-pass filter will only allow frequencies higher than the cutoff frequency (fc) to pass. The cutoff frequency is determined by the circuit's values of R and C; a larger value for either component will result in a lower cutoff frequency. When a frequency is greater than the cutoff frequency, the high-pass filter works as a low impedance path to ground.In a high-pass filter, the cutoff frequency is influenced by both the input resistor value and the feedback resistor value. As the feedback resistor value increases, the filter's cutoff frequency decreases, and vice versa.

Learn more about cutoff frequency here:

https://brainly.com/question/20813228

#SPJ11