.provide feedback to the controller about the robot's environment, a limited sense of sight and sound
Answers
Answer:
go to settings and u may figure out
Have the class participate in naming the different senses humans use; sight, hearing, touch, taste, and smell. Have students share ideas on how humans collect data from the environment using these five senses. Ask: What do these senses tell you about your environment? Elicit answers from students that reflect decision-making. For example, touch can tell you if something is too hot or too cold. Hearing can tell you the type of environment you’re in. Sight can tell you how far away obstacles might be.
Introduce students to the idea that robots also use senses, in the form of sensors, to collect information from the environment. Ask: Why do robots need sensors? Explain that robots need sensors to make decisions about tasks, like how to move or where to go next. Just like a student needs to wait until there is no traffic to cross the street, a robot needs to have an understanding about its surroundings. Ask: How do humans use their senses to make observations about their surroundings? Answers should include seeing what’s around them, hearing noises that give them clues to what’s nearby, and feeling items that might be near them.
Ask students to each draw a map of the classroom or room they are in. Give them a few minutes to make their maps. After students have finished making their maps, ask: What senses did you use to make your maps? Most students will have relied heavily on their sense of sight. Ask: If you could not see, what other senses could you use? Explain that some robots make maps of their environment using their various senses.
Related Questions
8. Hardwoods are mostly products of
leaf tree
Answers
Answer: No
Explanation: Hardwood comes from trees including walnut, maple, oak, mahogany, teak, and hickory.
If you lift the jig saw out of a cut with the blade running it may
Answers
Pleaseee need brainliest
Where are most plate boundaries?
Answers
Answer:
Most plate boundaries are located along the edges of the Earth's tectonic plates. These plates are composed of the Earth's crust and upper mantle, and they move and interact with one another at the boundaries. There are three types of plate boundaries: divergent, convergent, and transform.
Divergent plate boundaries occur where two plates are moving away from each other, typically resulting in the formation of a new oceanic crust. These boundaries are often found along the mid-oceanic ridges, where magma from the Earth's mantle rises up and creates new crust.
Convergent plate boundaries occur where two plates are moving towards each other. These boundaries can take several forms, depending on the type of plates involved. When two oceanic plates converge, one plate is typically subducted under the other, leading to the formation of a deep-ocean trench and the creation of volcanic islands. When two continental plates converge, they can collide and form mountains.
Transform plate boundaries occur where two plates are sliding past each other horizontally. These boundaries are typically found along large faults, such as the San Andreas Fault in California.
Overall, most plate boundaries are located along the edges of the Earth's tectonic plates, where they interact and create the geological features and phenomena that shape the planet.
what do we call a landslide in which fine-grained soil moves cohesively but with extensive internal shearing?
Answers
what is the angle of a receding line of an oblique drawing
Answers
The angle of the receding lines in an oblique drawing is typically 30 to 45 degrees. In an oblique drawing, the receding lines are the lines that represent objects or surfaces that are moving away from the viewer or are positioned at an angle to the viewer's line of sight.
The purpose of using an oblique drawing is to create a sense of depth and three-dimensionality on a two-dimensional surface. By angling the receding lines, the drawing mimics the way objects appear to recede into the distance in real life, where parallel lines appear to converge.
The specific angle chosen for the receding lines can vary depending on the desired effect or style of the drawing. A more acute angle (closer to 30 degrees) creates a stronger sense of depth, while a more obtuse angle (closer to 45 degrees) may flatten the drawing slightly and make it appear less dramatic.
It is important to note that the angle of receding lines in an oblique drawing is a creative choice and can be adjusted based on the specific requirements or aesthetic preferences of the artist or designer.
For more such questions on oblique drawing, click on:
https://brainly.com/question/27859909
#SPJ11
Raquel is setting her career goals. Because she hasn’t decided on a specific industry to focus on yet, she’s creating multiple career plans. What is MOST likely to help her if she plans to work in a mid-level career?
A.
activities that will improve her management skills
B.
an education that will give her an advanced degree
C.
getting her first-aid training and certification
D.
learning how to write and “debug” computer code
Answers
50 POINTS! - How to find scale of a design to real life?
(QUESTION EXPLANATION/CONTEXT)
So I have a culminating project and we need to make a 3D model of a bus shelter. My bus shelter is 14 inches high in the 3D modelling editor and supposed to be 157 inches in real life. I need the scale for that size. I am not sure how to find it. If you need any additional info about the design, just comment and I'll send it. ty!
Answers
To find the scale of your 3D model in relation to real life, you can use the following formula:
Scale = Real Life Size / Model Size
In your case, the real-life size of the bus shelter is given as 157 inches, and the model size is 14 inches. Plugging these values into the formula:
Scale = 157 inches / 14 inches
Scale ≈ 11.21
Therefore, the scale of your 3D model would be approximately 1:11.21. This means that one unit in your 3D model represents 11.21 units in real life. To convert any measurements from your 3D model to real-life measurements, you would multiply them by the scale factor.
what motivates high school students to join professional organizations?
A: getting higher credits
B: participating in competitive events
C: getting scholarships to further their education
D: paying lower membership dues
(it’s not engineering it’s Career and tech student organizations)
Answers
What is a corporation?
Answers
Explanation:
A corporation is an organization—usually a group of people or a company—authorized by the state to act as a single entity and recognized as such in law for certain purposes.
Perchuty (P. z fan ce the Treffe resistivalyThe law of resistivity.
Answers
We can see here that the law of resistivity, also known as Ohm's law, states that the electrical resistance of a conductor is directly proportional to its resistivity and length, and inversely proportional to its cross-sectional area.
How is law of resistivity represented?The Law of resistivity can be mathematically represented as:
R = ρ × (L / A)
Where:
R is the electrical resistance of the conductor,
ρ (rho) is the resistivity of the material,
L is the length of the conductor, and
A is the cross-sectional area of the conductor.
The resistivity (ρ) is a characteristic property of a material that quantifies its ability to resist the flow of electric current. It depends on the nature of the material, its temperature, and sometimes its purity. Resistivity is measured in ohm-meters (Ω·m).
Learn more about resistivity on https://brainly.com/question/30611906
#SPJ1
Employees cannot bb held legally responsible for an environmental violation.
A) O True
B) O False
Answers
Explanation:
Hello can someone please help me with this PLEASE
10. PRESSURE. =. -------------------------------------/ -----------------------------------------
11. Pascal’s Law Formula:
-------------------------------" ----------------------------"---------------------------------"----------------------------
12. Example Pascal’s Law Problem, solve for x (cross multiply if you need to?
FORCE 1:-------------------------" FORCE 2. X
AREA 1---------------------------= AREA 2 ----------------------------
Answers
If Pascal's law is true, it means that the pressure in the chamber under piston 1 is equal to the pressure under piston 2.
What is Pascal law?If Pascal's law is true, it means that the pressure in the chamber under piston 1 is equal to the pressure under piston 2. When a force is applied to the smaller piston 1, it creates pressure in the fluid, which then gets transmitted uniformly throughout the fluid and to the larger piston 2.
As a result, the pressure under piston 2 increases, allowing it to exert a greater force on the object being lifted. This is the principle behind hydraulic press systems, which use Pascal's law to generate a large force with a relatively small input force.
Read more on pascal law here:https://brainly.com/question/4262025
#SPJ1
Against which type of economic structure does conflict theory argue?
ОА. .
communism
OB.
socialism
Oc. democracy
O D. capitalism
Answers
Answer:
b) socialism
Explanation:
Conflict theory focuses on the competition between groups within society over limited resources. Conflict theory views social and economic institutions as tools of the struggle between groups or classes, used to maintain inequality and the dominance of the ruling class.
HOPE IT HELPS!!!!!!!!!
Fabrics for a school cardigan is to be made from 50% wool and 50% polyester. Why did they choose these materials?
Answers
Answer:
Because wool is good but it Costs much.And polyester is so so but it dont Cost much and so the materials are 50% good and 50% so so
BRAINLIEST BRAINLIEST BRAINLIEST
BRAINLIEST BRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIESTBRAINLIEST
A bicycle with 540mm wheel diameter passes over a segment arched culvert of radius 760mm. draw the locus of a point on the circumference of the wheel when it makes one complete revolution
Answers
In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.
How to calculate the valueThe diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm
≈ 1696.62mm.
Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.
Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.
Learn more about locus on
https://brainly.com/question/13941750
#SPJ1
what is escape of veocity?
Answers
Escape velocity is the minimum amount of velocity that an astronomical (celestial) or a physical object must possess so as to escape the gravitational attraction of any planet.
What is an escape velocity?An escape velocity is sometimes escape of velocity and it can be defined as the minimum amount of velocity that a physical object must possess in order to escape the gravitational attraction of a planet such as Earth.
Mathematically, the escape velocity of an astronomical (celestial) body such as planet Earth can be calculated by using this formula:
Ve = √2gR
Where:
Ve represents the escape velocity of a planet.g represents the acceleration due to gravity of planet.R represents the radius of planet.Read more on escape velocity here: brainly.com/question/13726115
#SPJ1
Complete Question:
What is escape of velocity?
what is wood cutting chisels for a primary one (Explain in low terms).If you can answer this question i will mark you brainliest question
Answers
Answer:A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power. The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
Explanation:
zero is an integer?
Answers
Yes, 0 IS an integer.
brainliest pls
Answer:
Yes.....................Which of the following is a career within the Maintenance and Operations pathway?
Painters
Precision layout workers
Cost estimators
Graphic designers
Answers
Answer:
A.) Painters
Explanation:
It's your definite answer!
Answer:
A.painters
enjoy your day
A manufacturer has been asked to produce 100 customized metal discs with a particular pattern engraved on them. Which production process should be selected?
Answers
Answer:
Job Shop production
Explanation:
Write
your answers on a separate piece of paper. Please do not write in this book.
1. Manufacturing activities are designed to produce products. True or false?
2. Producing a roadway is an example of a construction activity. True or false?
3. Give one example of a resource-processing system.
4. Iron ore is an industrial material. True or false?
5. Secondary processing systems change industrial materials into products.
True or false?
6. An item a company uses can be considered an industrial product. True or false
7. Buildings are outputs of
activities.
8. Name a common type of civil structure.
9. Define the term servicing, as used in this chapter.
10. Define the term repair, as used in this chapter.
Answers
Answer:
1;true
2;true
3;no idea
4;true
5;true
6;false
7;yes
8; hospital
9;no idea for now
10;no idea
Helpppp!!! Used to secure lights to lighting bars and can be used when working alone to
stabilize wood onto a solid surface *
A) bungee cord
B) duct tape
C) safety cable
D) C-Clamp
Answers
Secures items in place so one can work hands free.
a torque of 24 ft pounds is the result when a force of ______ pounds is applied to a wrench that is 18 inches long.
Answers
Answer:
16
Explanation:
The product of feet and pounds is the torque. 18 inches is 1.5 feet.
(1.5 ft)(x lbs) = 24 ft·lbs
x lbs = (24 ft·lbs)/(1.5 ft) = 16 lbs
The force will be 16 pounds applied to an 18-inch wrench to obtain 24 ft·lbs.
Answer:
16
Explanation:
tech a says that all wheels must be torqued to prevent wheels from loosening up and falling off. tech b says that all wheels must be torqued to prevent over tightening, which can weaken lug studs and warp brake rotors. who is correct
Answers
Answer: New wheels should be re-torqued after the first 50 to 100 driving miles. This should be done in case the clamping loads have changed following the initial installation due to the metal compression/elongation or thermal stresses affecting the wheels as they are breaking in, as well as to verify the accuracy of the original installation.
Answer:
I thinkC
Explanation:
What are some common employers of biomedical engineers
Answers
Hospitals, universities, research institutions, and manufacturers of diagnostic and medical instruments are some typical employers of biomedical engineers.
Biomedical engineers are experts who contribute to the creation of cutting-edge medical technology.
A strong academic background in a relevant field, such as physics, mechanical engineering, electrical engineering, or biomedical engineering, is necessary to become a biomedical engineer. For graduates who are not engineers, postgraduate degrees can be advantageous and may even be required for specific positions.
.provide feedback to the controller about the robot's environment, a limited sense of sight and sound
Answers
Answer:
go to settings and u may figure out
Have the class participate in naming the different senses humans use; sight, hearing, touch, taste, and smell. Have students share ideas on how humans collect data from the environment using these five senses. Ask: What do these senses tell you about your environment? Elicit answers from students that reflect decision-making. For example, touch can tell you if something is too hot or too cold. Hearing can tell you the type of environment you’re in. Sight can tell you how far away obstacles might be.
Introduce students to the idea that robots also use senses, in the form of sensors, to collect information from the environment. Ask: Why do robots need sensors? Explain that robots need sensors to make decisions about tasks, like how to move or where to go next. Just like a student needs to wait until there is no traffic to cross the street, a robot needs to have an understanding about its surroundings. Ask: How do humans use their senses to make observations about their surroundings? Answers should include seeing what’s around them, hearing noises that give them clues to what’s nearby, and feeling items that might be near them.
Ask students to each draw a map of the classroom or room they are in. Give them a few minutes to make their maps. After students have finished making their maps, ask: What senses did you use to make your maps? Most students will have relied heavily on their sense of sight. Ask: If you could not see, what other senses could you use? Explain that some robots make maps of their environment using their various senses.
100% serious what does the FBI and the CIA stand for. Will give 100 points
Answers
The FBI stands for Federal Bureau of Investigation and the CIA stands for Central Intelligence Agency.
What are the duties of the FBI and CIA?The Federal Bureau of Investigation (FBI) is the body assigned the duties of Investigation and enforcement of federal laws regarding issues national security, including terrorism, espionage, and cybercrime
To assist the president and other policymakers, the Central Intelligence Agency (CIA) is tasked with gathering, processing, and disseminating intelligence data relating to national security.
To safeguard national security objectives, the CIA engages in covert activities and supports foreign governments and intelligence agencies.
Find more exercises regarding the FBI;
https://brainly.com/question/30166719
#SPJ1
refers to the capability to keep moving forward on a specified grade.
Select one:
a. Gradability
b. Hill-climbing ability
C. Startability
d. Maneuverability
Answers
Answer:
maneuverability
Explanation:
needless to say, I took the quiz
Dimensions should be placed__
the drawing whenever possible__lines should not cross dimension lines
Answers
Answer:
dimensions should be placed OUTSIDE the drawing whenever possible THE lines should not cross dimension lines
Explanation:
Which place does “ the home of your ancestors”? refer to?What is jada response to nia and emily disapproval
Answers
The place that does “ the home of your ancestors” refer to is Cobo Verde.
Jada response to Nia and Emily disapproval was that she feels guilty.What is an ancestral home?This is known to be a kind of a house, that is seen in the village, or a place where a family must have lived in the past.
Note that in the above context, The place that does “ the home of your ancestors” refer to is Cobo Verde.
Jada response to Nia and Emily disapproval was that she feels guilty.earn more about guilty from
https://brainly.com/question/25713795
#SPJ1
