What are two major instruction set characteristics that divide general-purpose- register architectures?

Answer:

  Tech B

Explanation:

Bleeding the master cylinder on the bench does nothing for the air in the brake lines on the vehicle. The bench bleeding is a preferred first step, but bleeding the rest of the brake system is also required. A final check of proper operation on the vehicle should also be accomplished.

Tech B is correct.

The work done by a 10 HP motor when it raises a 1000 Newton weight at a vertical distance of 5 meters is 5kJ.

Define work. Explain the rate of doing work.

Work is the energy that is moved to or from an item by applying force along a displacement in physics. For a constant force acting in the same direction as the motion, work is easiest expressed as the product of force magnitude and distance traveled.

Since the force transfers one unit of energy for every unit of work it performs, the rate at which work is done and energy is used are equal.

Solution Explained:

Given,

Weight = 1000N and distance = 5m

A/Q, the work here is done in lifting then

Work = (weight) × (distance moved)

         = 1000 X 5

         = 5000Nm or 5000J = 5kJ

Therefore, the work done in lifting a 1000 Newton weight at a vertical distance of 5 meters is 5kJ.

To learn more about work, use the link given
https://brainly.com/question/25573309
#SPJ9

Answer: Can not help

Explanation:

The use of solar power, hydropower system and geothermal systems are an upcoming trend in  plumbing or electrical system.

Green design is known to be a kind of product or system that is said to be reserved for those areas of design that are said to be consciously working to make the end product a sustainable and ecologically feasible one

Note that Green design is made in numerous fields such as, in car and plumbing or electrical system to save time and money.

Learn more about Green Designs from

https://brainly.com/question/2078812

Answer:

The amount of shaft work the turbine cam do per second is 3660.29 kJ

Explanation:

The given parameters are;

Pressure at entry p₁ = 300 kPa

The mass flow rate,  \(\dot {m}\) = 5.0 kg/sec

The initial temperature, T₁ = 175°C

Therefore;

The enthalpy at 300 kPa and 175°C, h₁ = 2,804 kJ/kg

At the turbine exit, we have;

The pressure at exit, p₂ = 100 kPa

The quality of the steam at exit, in percentage, x₂ = 60%

Therefore, for the enthalpy, h₂ for saturated steam at 100 kPa and quality 60%, we have;

h₂ = 417.436 + 0.6 × 2257.51 = 1771.942 kJ/kg

Heat loss from the turbine, \(h_l\)= 1,500 kW

By energy conservation principle we have;

dE/dt = \(\dot Q\) - \(\dot W\) + ∑\(m_i \cdot (h_i\)+ \(ke_i\) +\(pe_i\)) - ∑\(m_e \cdot (h_e\) + \(ke_e\) +\(pe_e\) )

0 = -\(h_l\)  -  \(\dot W\) + \(m_i \cdot h_i\) - \(m_e \cdot h_e\)  

\(\dot W\) = \(\dot {m}\) × (h₁ - h₂) - \(h_l\) = 5.0×(2,804 - 1771.942) - 1500 = 3660.29 kJ/s

The rate of work of the shaft = 3660.29 kJ/s

The amount of shaft work the turbine cam do per second = 3660.29 kJ.

Answer:

yes

Explanation:

an idea could be a jack o lantern monster since it Halloween tomorrow  

The person who is correct based on the assertions made about the multi-plate clutch is:

This refers to the machinery which makes use of plates so that there would be efficient transmission between the engine shaft and the transmission shaft.

WIth this in mind, we can see that they must have specific amount of clearance when they are installed so that they can effectively function in the automobile.

Read more about multi-plate clutch here:
https://brainly.com/question/23538626

Common agricultural commodities include dairy products, wheat, and coffee. You can invest in and “trade” these products virtually, without running a farm and purchasing and storing the items yourself.

High-temperature refrigeration applications will normally provide box temperatures of 47 to 60°F.

In the question, asked to specify the range of temperature for High-temperature refrigeration applications for the box.

Refrigerants are the coolants used in refrigeration devices such as ac,  refrigerators, etc. Some examples of refrigerant CFCs.

Here, the required range of temperature for High-temperature refrigeration applications varies from  47 to 60°F.

Thus, high-temperature refrigeration applications will normally provide box temperatures of 47 to 60°F.

Learn more about refrigerants here:
https://brainly.com/question/13002119
#SPJ4

Answer:

Option A - fail/ not fail

Explanation:

For this given problem, if the yield strength is now 45 ksi, using Distortion Energy Theory the material will _fail______ and using the Maximum Shear Stress Theory the material will ___not fail_______

Answer:

I am not sure it's confusing

The code requires switches to be installed at every entrance to a room.

In English language, every can be defined as a determiner and it is typically used before a singular noun while referring to each of the members of a set without exception.

In this context, every is the most appropriate word to use in filling the blank because entrance is a singular noun while the room is a set.

Therefore, the code requires switches to be installed at every entrance to a room.

Read more on determiner here: https://brainly.com/question/3620820

#SPJ1

The tool that has a revolving vertical shaft and a cutter is a router. The correct option is b.

There are many different kinds of power tools, including portable power tools like a circular saw, heat guns, and wall chasers as well as electrical power tools like impact wrenches, lathes, power drills, power ratchet sets, and power saws.

Power tools including circular saws, jigsaws, drills, hammer drills, sanders, grinders, routers, and many others reduce labor and time requirements. The requirement for knowledge of the risks that power tools provide if used improperly is raised due to their rising use.

A power tool called a router has a flat base and a spinning blade that protrudes beyond the base. An electric motor or a pneumatic motor can drive the spindle.

Therefore, the correct option is b) router.

To learn more about power tools, refer to the link:

https://brainly.com/question/30115428

#SPJ6

Answer:

15psig

Explanation:

Answer:

I this a working or u just wanna text?

Answer:

10 flip -flops are required to build a binary counter circuit to count to from 0 to 1023 .

Explanation:

Answer:

a). 5 cylinders

b). 3 cylinders

Explanation:

To develop a gasoline engine that produces

Power, P = 300 hp

               = 300 x 746 = 223710 watt

at speed, N = 600 rpm = 100 rps

and stroke volume \($V_s=0.5$\) L

                                   = \($0.5 \times 10^{-3}\ m^3$\)

a). A naturally aspirated engine

BMEP at peak power = 10 bar

                                    = \($10 \times 10^5\ N/m^2$\)

Suction volume, V = \($V_s \times N$\)

                           = \($0.5 \times 10^{-3} \times 100 = 0.05\ m^3/s$\)

Power produced in one engine cylinder , p = BMEP x V

                                                                        = \($10 \times 10^5 \times 0.05$\)

                                                                        = 50000 watts

No. of cylinders required, n = \($\frac{P}{p}$\)

                                              = \($\frac{223710}{50000}$\)    

                                             = 4.47

So number of cylinders ≈ 5 nos.

b). A turbo charged engine

   BMEP = 20 bar = \($20 \times 10^5\ N/m^2$\)

   and Volume V = \($0.05\ m^3 /s$\)

Power produced in one engine cylinder, p = BMEP x V

                                                                       = \($20\times 10^5 \times 0.05$\)

                                                                       = 100000 watts

Therefore, number of cylinders, n = \($\frac{P}{p}$\)

                                                        = \($\frac{223710}{100000}$\)

                                                        = 2.23

So number of cylinders ≈ 3 nos.

A car manufacturing company decides to open a bid for a new part they need to install in order to improve the efficiency of the brakes. We can conclude that this is a PMD/PED non-paradigmatic case. The correct option is b.

A choice that should be made by engineers, or at the very least in accordance with professional engineering standards, is known as "proper engineering design" (PED). A choice that should be made by managers, or at the very least be controlled by management, is known as proper management design (PMD).

PED, or proper engineering decision. A decision should be made by engineers or at the very least follow professional engineering standards for a number of reasons, including:  Involving complex technological issues that call for engineering knowledge and Adheres to the moral principles reflected in engineering codes, particularly those that demand engineers to safeguard the public's health and safety.

Learn more about car, here:

https://brainly.com/question/29068011

#SPJ4

Kirchhoff's voltage and current laws can be used to find the relationship between V1, V2, I1, and I2. The relationship can be represented in matrix form as [Z], a 2 × 2 matrix.

Kirchhoff's voltage law states that the sum of voltages around any closed loop in a circuit is equal to zero. Applying this law to the circuit, we can write:

V1 - V2 - I1 * R1 = 0 -- Equation 1

Kirchhoff's current law states that the sum of currents entering a node in a circuit is equal to the sum of currents leaving that node. Applying this law to the circuit, we can write:

I1 - I2 - I3 = 0 -- Equation 2

To represent these equations in matrix form, we can rearrange the terms:

(V1 - V2) - (I1 * R1) = 0 -- Equation 1'

I1 - I2 - I3 = 0 -- Equation 2'

Now, we can rewrite Equation 1' and Equation 2' in matrix form as:

[1 -1] [V1] [(I1 * R1)]

[1 -1] * [V2] = [0]

[1 -1] [I1] [I2]

[0 -1] * [I3] = [0]

The matrix [Z] can be identified as:

[Z] = [1 -1]

[1 -1]

Therefore, the 2 × 2 [Z] matrix represents the relationship between V1, V2, I1, and I2 in the given circuit, where V1 and V2 are the voltages, and I1 and I2 are the currents.

learn more about Kirchhoff's voltage and current laws here:

https://brainly.com/question/30649621

#SPJ11

The sentences that best describe ISO 9001:2015 are:

1) Quality management systems- requirements

2) ISO 9001 is certifiable by accredited certification bodies

3) "Combination of internal and external issues that can have an effect on an organization's approach to developing and achieving its objectives" is the definition of: Context of the organization

4) "Systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which the audit criteria are fulfilled" is the definition of: Audit

5) Mandatory documented information required by ISO 9001:2015 standard includes: Scope of the quality management system, Quality objectives, Design and development changes, and Maintenance of infrastructure

6) The clause of ISO 9001:2015 standard which is the requirement for conducting internal audit specified is Clause 9: Performance evaluation

7) Audit criteria include: ISO 9001:2015 standard, Customer contract requirements, Quality manual, and Operating procedures

8) Internal audit shall be performed at planned intervals by internal auditors of the organization implementing ISO 9001:2015 quality management system.

9) Purpose of conducting internal audits includes checking compliance of the quality management system against ISO 9001:2015 requirements, identifying improvement needs, and evaluating the effectiveness of the quality management system.

10) Extent and boundaries of an audit are defined as: Audit scope

11) The principles of auditing include: Ethical conduct, Evidence based approach, Due professional care

12) As long as a piece of critical monitoring equipment is periodically used by the operators who know how to use it skillfully, a formalized maintenance and calibration program is not necessary: False

ISO 9001:2015 determines requirements for a quality management system provided an organization needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements and aims to enhance customer satisfaction through the effective application of the system

Therefore, the correct answer is as given above

learn more about ISO 9001:2015: https://brainly.com/question/28870416

#SPJ1

Answer:

The correct option is A

Explanation:

Thermoplastics are polymers that can be recycled. They can be melted with heat and moulded into any shape which becomes hard when cooled. The heat applied to it in the process of recycling does not affect its chemical composition.

There are two main classes of thermoplastics; semi-crystalline and amorphous.

An amorphous thermoplastic has a disorderly arranged molecular structure which makes it difficult to have a definite melting temperature (Tm). However, a semi-crystalline thermoplastic has a well arranged molecular structure which makes it melt after a certain/definite amount of heat is absolved. Hence, the correct answer is A

The objective of this assignment is to design a logic-based traffic light controller system for a 4-way intersection, which considers vehicle and pedestrian movement, and detects red light violations. The system should ensure equal green light durations for all directions and adhere to specific input and output requirements.

Inputs for the system include North-South and East-West inductive loop detectors for vehicle detection and pedestrian crossing buttons for each direction. Outputs include North-South and East-West traffic lights (Green/Yellow/Red), pedestrian crossing lights for each direction, and a flag to signal red light violations.

1. The system should run on a clock for sequential operation.
2. Each traffic light should follow the standard sequence: Green -> Yellow -> Red.
3. Equal green light durations for all directions must be ensured.
4. Pedestrian crossing lights should be activated upon pressing the crossing button and should indicate when it's safe to cross.
5. The system should monitor the inductive loop detectors to detect vehicles approaching or waiting at the intersection.
6. The red light violation flag should be triggered when a vehicle crosses the intersection during a red light.

These requirements provide a clear foundation for designing a logic-based traffic light controller system for a 4-way intersection.

Know more about the traffic light controller system click here:

https://brainly.com/question/29413565

#SPJ11

Answer:

The condition in which a problem exists

Explanation:

Context is the situation surrounding information, e.g. if you don't understand a word in a passge you can look for "context clues" where you use surrounding words to infer the meaning of the unknown one

Answer:

which class is this. I don't know sry

The minimum rating required for a receptacle is 15 amperes.

Wiring devices such as outlets and receptacles have amperage ratings that reflect their capacity to handle electrical current. A minimum rating of 15 amps is required for a receptacle. Most household outlets are rated at 15 or 20 amps. If the circuit is rated for 20 amps, a 20-amp receptacle may be used.

However, a 20-amp outlet should not be installed on a 15-amp circuit since it will not offer any benefits but instead increase the risk of overheating and fires. Instead, 20-amp outlets are intended for circuits that are rated for 20-amps.

Learn more about receptacle at

https://brainly.com/question/29988666

#SPJ11

Answer:

3

Explanation:

To determine if the rings are pure silver, we can calculate the density of the rings and compare it to the density of pure silver. The density of a material is the mass of the material per unit volume.

First, we need to find the volume of one of the rings. Since the rings are cylindrical, we can use the formula for the volume of a cylinder to find the volume of each ring:

V = π * r^2 * h

Where V is the volume of the ring, π is approximately equal to 3.14, r is the radius of the ring, and h is the height of the ring. In this case, the height of the ring is equal to the thickness of the ring, which is equal to the change in the water level (8.45 mm) divided by the number of rings (10). The radius of the ring is equal to half the diameter of the graduated cylinder (2.5 cm / 2 = 1.25 cm), since the rings are placed in the cylinder side by side.

Plugging these values into the formula, we find that the volume of each ring is:

V = 3.14 * (1.25 cm)^2 * (8.45 mm / 10) = 0.00367 cm^3

Next, we can use the mass and volume of each ring to calculate the density of the rings:

density = mass / volume

Since the mass of each ring is 0.738g and the volume of each ring is 0.00367 cm^3, the density of the rings is:

density = 0.738 g / 0.00367 cm^3 = 201.09 g/cm^3

Finally, we can compare the density of the rings to the density of pure silver, which is 10.49 g/cm^3. Since the density of the rings is much higher than the density of pure silver, it is likely that the rings are not pure silver.

It is important to note that this calculation is only an approximate estimation of the purity of the rings. There may be other factors that affect the density of the rings, such as impurities or variations in the thickness of the rings. Additionally, the value of the density of pure silver used in this calculation may not be entirely accurate, as the density of a material can vary depending on factors such as temperature and pressure. A more precise determination of the purity of the rings would require further testing and analysis.

The debugging of this code would be to replace Character that is inside the class "namespace".

Therefore, you must use Character.Character instead of only Character if you use the class from outside of the namespace.

This refers to the process of identifying and eliminating bugs in a computer program that does not allow it to run or execute.

Hence, we can see that the complete program contains the error of the character "Character" being inside the class "namespace". and you would need to rename it appropriately.

Read more about debugging here:

https://brainly.com/question/16813327

#SPJ1