What commands will show configuration file details stored in RAM or NVRAM? (Select Two) Show RAM Show startup-config Show running-config Show flash

A two-way radio at a fixed site describes a base station in the best possible way. It can also be referred to as a repeater, which receives low-level transmissions from hand-held or mobile radios and rebroadcasts them at a higher level for communication over long distances.

A base station is typically installed at a fixed site and acts as a two-way radio to receive low-level transmissions from hand-held or mobile radios and rebroadcasts them at a higher level. It can also be referred to as a repeater, which amplifies transmissions that must be carried over long distances. Mobile radios can be mounted in a vehicle, while portable ones can be carried on a belt clip. Base stations, on the other hand, are two-way radios that act as a central command center. They are widely used in public safety, transportation, and utilities, as well as in commercial and industrial settings.

Therefore, the most accurate description of a base station is A two-way radio at a fixed site.

To know more about radio visit:
https://brainly.com/question/29787337
#SPJ11

Answer:

it is A or B

Explanation:

I know it is either A or B because I took the test and tried Dutch tilt n front angle, got them both wrong on my 1st and second try.

Answer:

3.59 minutes

Explanation:

We solve this question using z score formula

Using Excel

Z-SCORE= (DataPoint-AVERAGE(DataSet))/STDEV(DataSet)

IN EXCEL,

AVERAGE, an excel function that calculates the Average of data set

STDEV.S: calculates the standard deviation while treating the data as a ‘sample’ of a population.

STDEV.P: This function calculates the standard deviation while treating the data as the entire population.

Z score formula = x - μ/σ

x = ?? μ = 2.5 minutes σ = 0.5 minutes

We are asked : If 1.5% of the callers are put on hold for longer than x minutes, what is the value of x?

Hence, Longer than = Greater than =

100 - 1.5%

= 100 - 0.015

= 0.985 ( 98.5%)

Using Excel we calculate = z score for 98.5 percentile

= 2.1701

Z score = x - μ/σ

2.1701 = x - 2.5/0.5

2.1701 × 0.5 = x - 2.5

1.08505 = x - 2.5

x = 1.08505 + 2.5

x = 3.58505

Approximately to 2 decimal places = 3.59 minutes

Therefore, 1.5% of the callers are put on hold for longer than 3.59 minutes.

Answer: Weighted application blank

Explanation:

Answer:

Electronic

Explanation:

The user should not change the file exetensions because the operating system uses these extenstion to identify the program that should be used to open the file. Hence, the given statement in this question is True.

The user should not change the file extension because the operating system uses the extension to identify which program should be used to open that file. File extension identifies which file should be opened in which program. For example, .doc extension files always open in W-ord software. And, dot-png, dot-jpg file extensions open in image editing or image opening software.

If you change the file extension of any file, then the operating system doesn't know which program to open that file. Therefore, it is required that the user should not change the file extension.

The complete question is given below:

"

File extensions should not be changed by the user because the operating system uses them to identify the program that should be used to open the file.

"

You can learn more about file extension at

https://brainly.com/question/28578338

#SPJ4

Answer:

The steps that Fatima needs to follow in-order to send an email on the Outlook include:

1. Open the Outlook application.

2. Under the Home tab, click the New Email button.

3. Click the To button to choose a contact

4. Click the Send button after typing the message.

Explanation:

For every new email to be sent out through the Outlook, there are steps to follow like ensuring that the Outlook application is appropriately opened. Later, a tab showing new email should be clicked to open the dialogue box for typing the email message.

After the message has been typed, a contact to whom the message is going to be sent to is selected before actually sending out the message by a click of a button.

Answer:

4  Click the Send button after typing the message.

2  Under the Home tab, click the New Email button.

3 Click the To button to choose a contact.

1  Open the Outlook application.

A satellite is a tool that the meteorologists use to track the weather and environmental conditions on Earth.

Satellites are devices that trace orbits around our planet and are used for weather monitoring.

Therefore, we can conclude that a satellite collects and transmits meteorological information.

Learn more about uses of satellites in weather here: https://brainly.com/question/7115770

Answer:

A

Explanation:

The  classification of the addresses is as follows:

1. 119.67.44.86 - IPV4

2. 94.49.190.138 - IPV4

3. 258.151.50.253 - INVALID

4. e0f8:af58:eee6:52b - INVALID

5. d938:2da7:b596:6d34:3970:6789 - INVALID

Based on the given information, we can determine the types of the following addresses:

1. 119.67.44.86: This address consists of four octets separated by dots, so it follows the IPv4 format.

Hence, it is an IPv4 address.

2. 94.49.190.138: Similar to the previous address, this address also has four octets separated by dots.

Therefore, it is an IPv4 address.

3. 258.151.50.253: In this address, the first octet "258" exceeds the valid range (0-255) for IPv4 addresses.

Therefore, this address is invalid.

4. e0f8:af58:eee6:52b: This address consists of five 8-byte pairs, separated by colons. Since IPv6 addresses should have eight 8-byte pairs, this address is incomplete and does not follow the correct IPv6 format. Hence, it is invalid.

5. d938:2da7:b596:6d34:3970:6789: This address has six 8-byte pairs separated by colons, which does not match the correct IPv6 format. Therefore, it is invalid.

Learn more about IP address here:

https://brainly.com/question/31171474

#SPJ4

To find students with the highest and lowest average marks in the first two CS (I) homework, read data from a file, calculate averages, and print the corresponding student names using the provided Python code.

To write a program that finds all students who score the highest and lowest average marks of the first two homework in CS (I),

Below is the Python code that can be used to find the students who score the highest and lowest average marks of the first two homework in CS (I):

```python#open the filefile = open('filename', 'r')#initialize a dictionary to store the average of first two homework marks for each studentdata = {}#iterate through each line of the filefor line in file:#split the line into a list of valuesvalues = line.strip().split()#get the student's name and the first two homework marksname = values[0]marks = [int(x) for x in values[1:3]]#calculate the average of the first two homework marksaverage = sum(marks)/len(marks)#store the average in the dictionarydata[name] = average#find the highest and lowest averageshighest = max(data.values())lowest = min(data.values())#find the students with the highest and lowest averageshighest_students = [name for name, average in data.items() if average == highest]lowest_students = [name for name, average in data.items() if average == lowest]#print the names of the studentsprint('Students with highest average:', ', '.join(highest_students))print('Students with lowest average:', ', '.join(lowest_students))```

Note: Replace the 'filename' with the actual name of the file that contains the data.

Learn more about Python code: brainly.com/question/26497128

#SPJ11

Answer:

1. 12 anything below that looks like a slideshow presentation lol

2. False I dont think so.

3. Length X Width

4. Almost all news programs are close up.

5. True

Answer:

b

Explanation:

and julie needs to geta life

Answer:

Automatically add missing opening or closing tags to the HTML

Explanation:

What does using nesting in HTML allow you to do? Automatically add missing opening or closing tags to the HTML Prevent any misspelled tag keywords from appearing in the HTML Improve readability and find and fix problems more easily

StudentID | StudentName | CollegeName | Hobby

--------- | ----------- | ----------- | -----

1         | Alice       | College A   | Reading

1         | Alice       | College B   | Painting

2         | Bob         | College A   | Sports

3         | Charlie     | College C   | Cooking

1. Deletion Anomaly: If we delete a row for a student who has applied to multiple colleges, we would also lose information about the other colleges they applied to. For example, if we delete the row for StudentID 1 who applied to both College A and College B, we would lose the information about their application to College B.

Update Anomaly: If we update the name of a student who has applied to multiple colleges, we would have to update their name in multiple rows, leading to potential inconsistencies. For example, if we update the name of StudentID 1 from "Alice" to "Alicia" in one row, but forget to update it in another row, the data becomes inconsistent.

Insertion Anomaly: If we try to insert a new student who has not applied to any college yet, we would not be able to represent this information in the current structure. Since the relation combines student information with college application information, there is no way to add a new student without specifying at least one college application.

2. To transform this relation into BCNF and 4NF, we can create two separate relations:

Relation 1: STUDENT (StudentID, StudentName)

- Primary Key: StudentID

Relation 2: APPLICATION (StudentID, CollegeName, Hobby)

- Primary Key: (StudentID, CollegeName)

- Foreign Key: StudentID references STUDENT(StudentID)

By splitting the original relation into these two relations, we eliminate redundancy and ensure that each relation is in BCNF and 4NF. The STUDENT relation contains information about the students, while the APPLICATION relation contains information about their college applications and hobbies. The foreign key in the APPLICATION relation maintains the relationship between the two tables.

Learn more about Deletion Anomaly here:

https://brainly.com/question/32671660

#SPJ11

To complete the method that adds a note to an oversized array of notes we use the option b) ++numNotes.

This is because a few reasons that are explained below:

First, the method called addNote() has three parameters i.e. String[] allNotes, int numNotes, and String newNote.

Second, the code block that comes after this signature initializes the value of the allNotes[numNotes] array as the newNote passed as an argument. Here, the numNotes parameter represents the index position of the element to be initialized. For instance, if we pass a numNotes value of 0, then the newNote parameter would be assigned to allNotes[0].

Third, the final step for completing the method is to increase the numNotes value so that it reflects the total number of elements in the allNotes[] array. Hence, to achieve this we use the option b) ++numNotes. The increment operator (++) increments the value of the numNotes parameter by 1 and then assigns it back to the same variable. The updated value of numNotes represents the total number of notes in the oversized array after adding the new note to it.Consequently, the complete code for the addNote() method would be:

public static void addNote(String[] allNotes, int numNotes, String newNote)

{allNotes[numNotes] = newNote;++numNotes;}

Learn more about Array here:

https://brainly.com/question/27820133

#SPJ11

Answer:

When you ask a question in brainly, two helpers will answer it, then on each answerer you'll find "mark as brainliest" button which looks like a crown.

Hope this helps :)

Answer:Here are some examples of computer skills you can include on your resume to show you are good with computers:

Proficient in HTML coding.

Proficient with Microsoft Word, Excel and PowerPoint.

Thorough understanding of social media and social media analytics.

Knowledge of SEO techniques.

Skilled in website troubleshooting

Explanation:

Answer: Written in Python

age = int(input("How old are you? "))

for i in range(1,age+1):

   print("**HUG**")

Explanation:

The first line prompts the user for age

age = int(input("How old are you? "))

The next line is an iteration that starts from 1 till the user input

for i in range(1,age+1):

The last line prints "**HUG**" while the iteration is true

   print("**HUG**")

Hope this helps :)

Answer:

c,becauses she is helping

Explanation:

thank me later

Answer:

A

Explanation:

i got a 100

Answer:A,B, and D

Explanation:

Answer:

A B D

Explanation:

I just took it

Here's an example code that draws a simple house with a green background, a sun, and some trees:

Used to assign draw callbacks to spaces. Basically every time the room is redrawn the assigned method is called. Most commonly used in combination with bgl and blf to draw overlays on the screen.

import simplegui

# set canvas size

CANVAS_WIDTH = 600

CANVAS_HEIGHT = 600

# define draw handler

def draw_handler(canvas):

   # draw green background

   canvas.draw_polygon([(0, 0), (0, CANVAS_HEIGHT), (CANVAS_WIDTH, CANVAS_HEIGHT), (CANVAS_WIDTH, 0)], 1, "Green", "Green")

   # draw sun

   canvas.draw_circle((500, 100), 50, 2, "Yellow", "Yellow")

   # draw house

   canvas.draw_polygon([(200, 200), (200, 400), (400, 400), (400, 200)], 2, "Red", "White")

   canvas.draw_polygon([(200, 200), (300, 100), (400, 200)], 2, "Red", "White")

   canvas.draw_polygon([(250, 300), (250, 350), (300, 350), (300, 300)], 2, "Black", "Black")

   # draw trees

   canvas.draw_circle((100, 500), 50, 2, "Green", "Green")

   canvas.draw_polygon([(80, 500), (120, 500), (100, 400)], 2, "Brown", "Green")

   canvas.draw_circle((500, 500), 50, 2, "Green", "Green")

   canvas.draw_polygon([(480, 500), (520, 500), (500, 400)], 2, "Brown", "Green")

# create frame

frame = simplegui.create_frame('House Drawing', CANVAS_WIDTH, CANVAS_HEIGHT)

# set canvas background

frame.set_canvas_background("Green")

# register draw handler

frame.set_draw_handler(draw_handler)

# start frame

frame.start()

The code should draw a green background, a red house with white windows and a black door, a yellow sun, and two trees. You can modify the code to add your own features and experiment with different colors and shapes.

Learn more about canvas,

https://brainly.com/question/12547765

#SPJ1

Answer:

its external hard drive  and flash drive

Your welcome

Explanation:

Answer: it will print:

I (4 spaces) Love Python

Explanation: the \t adds in a tab (4spaces) in a print statement

The information that Bill from Accounting has emailed you would be the statement of your account.

The statement of account can be used to describe the details that are contained in the accounting information of a person that has to do with their balance at the end of an accounting period.

It helps by telling the account holder the amount of money that they would have left in their account at that period of time.

Therefore we would conclude that given that it is month end the information that has been sent to your email would be your statement of account.

Read more on accounting information here:

https://brainly.com/question/26261281

#SPJ1

The statement "if you save a workbook while sheets are grouped, the workbook opens with ungrouped sheets" is false. When you save a workbook with grouped sheets, the workbook will open with the sheets still grouped.

Explanation:

When you group sheets in a workbook, you can perform actions on all the sheets at once, such as formatting or editing. If you save the workbook while the sheets are grouped, the grouping information is saved with the workbook. When you reopen the workbook, the sheets will remain grouped as they were when you saved the workbook.

This behavior is consistent across different versions of Microsoft Excel. Therefore, the statement that the workbook opens with ungrouped sheets after saving while they are grouped is incorrect.

To learn more about Microsoft Excel click here, brainly.com/question/30750284

#SPJ11

Two specialized alternatives not often used as a continuity strategy in the field of management of information security are:1. Mirrored site: A mirrored site is a type of backup strategy that involves creating an exact copy of the primary site, including its hardware, software, and data.

This approach is often used by organizations that require high availability of their systems and cannot afford any downtime. In the event of a disaster, the mirrored site can be activated, and operations can continue seamlessly. However, this approach can be expensive and requires significant resources to set up and maintain.2. Cold site: A cold site is a type of backup strategy that involves keeping a physical location available for use in the event of a disaster, but without any of the hardware, software, or data required to run the organization's systems. This approach is often used by organizations that have low tolerance for downtime but do not have the resources to maintain a mirrored site. In the event of a disaster, the organization would need to procure and install all the necessary hardware, software, and data before operations can resume. This approach is less expensive than a mirrored site, but the downtime can be significant. In conclusion, while these two specialized alternatives are not often used as a continuity strategy, they may be suitable for organizations with specific needs and constraints.

Learn more about mirrored here

https://brainly.com/question/1126858

#SPJ11

The minimum number of bits that one needs to give a unique bit sequence to each of the possible characters is 8.

A binary sequence is known to be also called a bitstream. This is regarded as is a string of ones and zeros.

The information in storage which can be in form of text message, a photograph, a song, a computer program, etc. may looks the same, like in a form or sequence of bits.

See options below

4

6

7

8

Learn more about bits from

https://brainly.com/question/19667078

A knowledge worker is an individual who works primarily with knowledge, particularly in a professional context.

11. A knowledge worker's job requires a high degree of expertise, education, and skills, as well as the ability to think critically and creatively. If you work in a field that involves research, analysis, or other knowledge-based activities, you are likely to be a knowledge worker. Many jobs require knowledge workers, including scientists, engineers, doctors, lawyers, and accountants. If you are interested in pursuing a career as a knowledge worker, you will need to develop your knowledge, skills, and expertise in your chosen field.

12. Businesses would use mobile computing or web-based information systems in their operations when they require to streamline their processes and improve their efficiency. An example of a business function that could be implemented on each platform is given below:

Mobile Computing: A business can use mobile computing to track employees' location and send notifications. This can be useful for delivery companies, food delivery, and transportation companies that require to keep track of their employees' movement and scheduling. In addition, mobile computing can be used to make sure that customer-facing businesses like restaurants and retail stores can take payments on the go.

Web-based Information Systems: Businesses that manage a large number of clients may benefit from using web-based information systems to store customer data and track orders. This can be useful for businesses that require to manage customer relationships like e-commerce stores or subscription services. In addition, web-based information systems can be used to make sure that customer-facing businesses like restaurants and retail stores can take payments on the go.

13. Boundaries in the context of TPS are the points at which the system interacts with the external environment. For example, when a transaction occurs, the boundary is where the data is entered into the system and then passed on to other systems or applications. The boundaries of an organization can be physical, such as the walls of a building or geographical boundaries. They can also be conceptual, such as the separation between different departments within a company. The three examples of boundaries are as follows: Physical Boundaries: The walls of a factory or office building are examples of physical boundaries. In addition, a shipping company might have to deal with geographical boundaries when transporting goods between countries or continents. Conceptual Boundaries: Different departments within a company might have different conceptual boundaries. For example, the sales department may have different priorities and objectives than the finance department. External Boundaries: These are the points at which the system interacts with the external environment. An example of an external boundary is when a transaction is initiated by a customer or a vendor.

To learn more about knowledge workers: https://brainly.com/question/15074746

#SPJ11

Answer: Each generation is defined by a significant technological development that changes fundamentally how computers operate – leading to more compact, less expensive, but more powerful, efficient and robust machines. These early computers used vacuum tubes as circuitry and magnetic drums for memory.

Explanation:

To access the Internet using a WWAN (Wireless Wide Area Network), you need a USB modem for the device you want to use and a valid data plan or subscription.

The USB modem serves as the hardware component that connects to the WWAN network. It typically comes in the form of a USB dongle or stick that can be plugged into the device's USB port. The USB modem contains the necessary components to establish a wireless connection with the WWAN network.In addition to the USB modem, a valid data plan or subscription is required. This plan is provided by a mobile network operator and allows the user to access the Internet through the WWAN network. The data plan determines the data allowance, speed, and any applicable charges for using the WWAN network.Together, the USB modem and a valid data plan enable devices to connect to the Internet via a WWAN network.

To learn more about  Network click on the link below:

brainly.com/question/32403209

#SPJ11