Which energy conversion takes place when a solar cell is used to light a street lamp?

In non-restrictive clauses like a, commas may be used. You could also use parentheses and dashes.

A nonrestrictive clause provides additional information about something you have already mentioned in a sentence, but the information is not necessary to understand what you are referring to. Nonrestrictive clauses are typically introduced by which or who and are separated by commas.

An additional bit of information is provided by a nonrestrictive clause. When referring to a special person, thing, or event, it is typically a proper noun or a common noun. The additional information is indicated by the use of commas.

For more information on non restrictive elements kindly visit to

https://brainly.com/question/24452052

#SPJ4

Answer:

200 Pa

Explanation:

pressure = force/area

force = 2400N

area = 6cm^2 per hoof

pressure = 2400/(6x2)

pressure = 200 Pa

B) A human hair. Today's nanotechnology-produced computer transistors are roughly equivalent in size to a human hair.

Transistors are electronic devices that are used to amplify or switch electronic signals and electrical power. They are fundamental building blocks of modern electronic devices and integrated circuits. Transistors are typically made from semiconductor materials, such as silicon, and they consist of three layers: the emitter, base, and collector. The size of transistors has been continuously shrinking over the years due to advancements in nanotechnology, allowing for more transistors to be packed onto a single chip, resulting in increased computational power and miniaturization of electronic devices. Today, transistors can be manufactured at the nanoscale, with dimensions on the order of tens of nanometers or even smaller.

To know more about dimensions visit :

https://brainly.com/question/31106945

#SPJ11

The correct answer is c. alpha particles. Radon is a radioactive gas that can be found in homes and buildings. It is detected through the measurement of alpha particles, which are emitted by the decay of radon atoms.

This measurement is usually done using a device called a radon detector, which can provide an accurate reading of the radon levels in a home. It is important to regularly test for radon in order to ensure that the levels are safe for occupants.

Radon is detected in a home through the measurement of alpha particles.

Learn more about radon here:- brainly.com/question/20527349

#SPJ11

Travels in longitudinal waves

Travels most slowly through a gas

Speeds up when temperature is increased

Is caused by vibration

Explanation for correct answers:

Yes, it does travel in longitudinal waves

Yes, sounds weird, but travels faster in the water

Yes, does speed up when temperature is increased

And yes, Is caused by vibration.

Can travel through a vacuum

Explanation for wrong answer:

actually, in space, there is NO sound, because there are no particals for the sound to vibrate with, there's just empty SPACE.

Answer:

B

Explanation:

This is my answer hope it helps you

The fraction of the dog's force which works on you is the part of the force that acts in the horizontal direction. Thus, the correct option is B.

When a dog is being pulled upon by leash. If the leash is pulled upwards and to the right, then there is a tensional force which acts upward and rightwards upon the dog. This single force can be resolved into two components which includes one which is directed upwards and the other which is directed rightwards.

Each component of force describes the influence of the leash in the given direction. The vertical component describes the upward influence of the force upon the dog and the horizontal component describes the rightward influence of the force upon the dog. And, when the dog is pulled forward horizontal component of force acts.

Therefore, the correct option is B.

Learn more about Force here:

https://brainly.com/question/13191643

#SPJ2

The spinning tube of air created by winds moving in opposite directions to tip upwards and become vertical because of the updraft of wind in a supercell. Hence, option (A) is correct.

As a deep, continuously revolving updraft known as a mesocyclone, a supercell is a type of thunderstorm. This causes these storms to occasionally be called spinning thunderstorms.

Supercells, which are the least frequent and have the potential to be the most severe of the four types of thunderstorms (supercell, squall line, multi-cell, and single-cell), are the least common overall.

Learn more about supercell here:

https://brainly.com/question/401575

#SPJ1

The electric iron with a power rating of 500 watts will consume 12 kilowatt-hours (kWh) of electricity when used continuously for 24 hours.

To calculate the units consumed, we need to consider the power rating and the duration of usage. The power rating of the electric iron is given as 500 watts, which is equivalent to 0.5 kilowatts (kW). By multiplying the power rating by the time used (24 hours), we obtain the total energy consumed, which is 12 kilowatt-hours (kWh). This value represents the units of electricity consumed by the electric iron during the 24-hour period.

Therefore, the electric iron will consume 12 kilowatt-hours (kWh) of electricity when used for 24 hours continuously with a power rating of 500 watts.

Know more about kilowatt here:

brainly.com/question/24057012

#SPJ11

Explanation:

The student made a model of an electric generator.

Student has made a model of a generator. Hence option B is Correct.

What is Faraday's law ?

Faraday's law states that "change in a magnetic field produces electric field in the circuit". It can also be stated as " when magnetic flux linked to a circuit changes, an electromotive force is induced in the circuit which is proportional to the rate of change of the flux.

When a conducting coil is moved in the magnetic field, according to faraday's law of induction we get current in the coil. When we move coil inside the magnetic field, lines of force of magnetic field is cut by the coil as a result it drives electron in the coil causes current it in the coil.

Hence in this picture we are moving coil and we are getting electricity, Hence mechanical energy is converting into electric energy. this is done by the generator. Hence option B is correct.

To know more about Electric generator, click :

https://brainly.com/question/15277088

#SPJ2

The swimmer would take 258 seconds, or 4 minutes and 18 seconds, to cross the river.

To solve this problem, we can use vector addition to find the swimmer's resultant velocity.

(i) Along what direction must he strike?

Let's draw a diagram to represent the situation:

    A

   /|

  / |

 /  |

/   |

B----C

In this diagram, the river flows from point A to point B, and the swimmer wants to cross the river from point C to point B. Let's call the velocity of the river Vr = 5 km/h and the velocity of the swimmer Vs = 10 km/h. We want to find the direction the swimmer should strike to cross the river straight.

Since the swimmer wants to cross the river straight, he needs to swim in a direction perpendicular to the river's flow. This means that the angle between the swimmer's velocity and the river's velocity should be 90 degrees.

Using trigonometry, we can find that the angle between the swimmer's velocity and the direction perpendicular to the river's flow is:

theta = arctan(Vr / Vs)

= arctan(5 / 10)

= 26.57 degrees

Therefore, the swimmer should strike at an angle of 26.57 degrees to the direction perpendicular to the river's flow.

(ii) What should be his resultant velocity?

To find the swimmer's resultant velocity, we need to add his velocity to the velocity of the river. Since the swimmer is swimming at an angle of 26.57 degrees to the direction perpendicular to the river's flow, we need to use vector addition to find his resultant velocity:

     Vs

    /|

   / |

  /  |Vr

 /   |

B----C--->river flow

Using trigonometry, we can find that the magnitude of the swimmer's resultant velocity is:

V = sqrt(Vs^2 + Vr^2)

= sqrt(10^2 + 5^2)

= 11.18 km/h

To find the direction of the swimmer's resultant velocity, we can use the following formula:

theta = arctan(Vr / Vs)

= arctan(5 / 10)

= 26.57 degrees

Therefore, the swimmer's resultant velocity is 11.18 km/h at an angle of 26.57 degrees to the direction perpendicular to the river's flow.

(iii) How much time would he take?

To find the time the swimmer would take to cross the river, we can use the following formula:

time = distance / velocity

The distance the swimmer needs to cross the river is the width of the river, which is 800 m. The swimmer's velocity is 11.18 km/h, or 3.1 m/s.

time = 800 / 3.1

= 258 seconds

Learn more about velocity here:

https://brainly.com/question/30559316

#SPJ11

The number of revolutions the spinning disc makes during the given time is 34 revolutions .

To find the number of revolutions the spinning disc makes during the given time, we need to first find the average angular velocity and then multiply it by the time.
Step 1: Calculate the initial angular velocity (ω₁).
Given that the spinning disc rotates at 130 revolutions per minute (rev/min), we first convert it to revolutions per second (rev/s) by dividing by 60:
ω₁ = 130 rev/min / 60 = 2.167 rev/s
Step 2: Calculate the final angular velocity (ω₂).
Since the disc stops, its final angular velocity is 0 rev/s.
Step 3: Calculate the average angular velocity (ω_avg).
The average angular velocity is the mean of the initial and final angular velocities:
ω_avg = (ω₁ + ω₂) / 2 = (2.167 + 0) / 2 = 1.0835 rev/s
Step 4: Multiply the average angular velocity by time to find the number of revolutions.
The given time is 31 seconds:
Number of revolutions = ω_avg × time = 1.0835 rev/s × 31 s ≈ 33.6 revolutions
The closest answer among the given choices is A) 34.

learn more about angular velocity Refer: https://brainly.com/question/29557272

#SPJ11

The differences in initial conditions, physical parameterizations, and spatial resolution can all contribute to the discrepancies in temperature prediction between the NAM and GFS models, especially in the first few hours after the forecast is issued.

One possible reason why the North American Mesoscale (NAM) model predicts higher temperatures than the Global Forecast System (GFS) model in the first nine hours after the forecast is issued could be due to the differences in their initial conditions and the way they represent physical processes.

Both models use a variety of input data, including surface observations, upper-air soundings, and satellite imagery, to initialize their simulations. However, they may use different techniques to interpolate and assimilate these data, which can lead to differences in the initial conditions of the models. Additionally, the models may use different numerical schemes to represent the physical processes that govern the evolution of the atmosphere, such as radiation, convection, and turbulence. These differences in the initial conditions and physical parameterizations can result in different predictions of the weather variables, including temperature.

Another possible factor that could contribute to the difference in temperature prediction is the resolution of the models. The NAM model has a higher spatial resolution than the GFS model, meaning that it can capture smaller-scale features of the atmosphere in more detail. This can be particularly important for temperature prediction, as it is strongly influenced by local features such as topography, land use, and surface moisture.

Overall, the differences in initial conditions, physical parameterizations, and spatial resolution can all contribute to the discrepancies in temperature prediction between the NAM and GFS models, especially in the first few hours after the forecast is issued. However, as the models assimilate more observational data and update their simulations, their predictions may converge to a more consistent forecast.

To know more about parameterizations, refer here:

https://brainly.com/question/31055234#

#SPJ11

Answer:

0.6m

I hope this help a little bit.

There is evidence that a supermassive black hole is at the center of the Milky Way based on several observations and studies.

Some of the key pieces of evidence include:

1. Stellar Orbits: Astronomers have observed the orbits of stars near the center of the Milky Way. These stars exhibit high speeds and tight orbital patterns, indicating the presence of a massive object with strong gravitational influence. By analyzing these stellar orbits, scientists have deduced the presence of a supermassive black hole.

2. Radio Source Sagittarius A*: In the constellation Sagittarius, there is a strong radio source known as Sagittarius A*. Detailed observations of this source have revealed it to be an extremely compact and highly energetic region. Based on its characteristics, scientists believe that Sagittarius A* is a supermassive black hole at the center of our galaxy.

3. X-ray and Infrared Emissions: Observations in X-ray and infrared wavelengths have detected intense emissions coming from the center of the Milky Way. These emissions are consistent with the behavior of matter being heated and accelerated as it falls into a supermassive black hole.

4. Gas and Dust Dynamics: Studies of gas and dust clouds near the galactic center have shown significant disturbances and high velocities. These observations suggest the presence of a massive object exerting gravitational forces on the surrounding material, indicating a supermassive black hole. Collectively, these lines of evidence provide strong support for the existence of a supermassive black hole at the center of the Milky Way.

Learn more about Sagittarius A here:

https://brainly.com/question/30495015

#SPJ11

The centripetal acceleration of the car on the circular track is found to be 10m/s².

The car is running on a circular track at a speed of 30m/s. The radius of the circular curve is 90 m.

The centripetal acceleration of the car is given by the relation,

a = v²/r

Where is the centripetal acceleration we is the speed of the car and R is the circular radius of the curve,

Putting values,

a = (30)²/90

a = 10m/s²

So, the centripetal  acceleration of the car is 10m/s².

To know more about centripetal acceleration, visit,

https://brainly.com/question/22103069

#SPJ4

Some people object to the inverted pyramid style, saying it has lost its usefulness for a variety of reasons, including- Increased reader sophistication, Lack of drama and Digital media.

The inverted pyramid style, which features the most significant information at the top and the least important at the bottom, is widely used in journalism. However, some individuals object to this style, claiming that it has lost its usefulness for various reasons, including:

Increased reader sophistication: According to some, the pyramid style is unsuitable for a more educated readership. They argue that the inverted pyramid's oversimplification of facts does not meet modern reader expectations.

Lack of drama: Because the inverted pyramid's central event is displayed at the beginning, the story can lose its drama as it unfolds. They also argue that a traditional storytelling approach is better suited for dramatic stories.

Digital media: In recent years, digital media has altered the way news is delivered and consumed. With the advent of click-bait articles and scrollable pages, the inverted pyramid is deemed less effective for digital media platforms. Instead, writers must adapt to the requirements of online audiences and deliver compelling and concise material to grab their attention. Overall, the pyramid-style may still be appropriate for certain articles. However, due to an increasing readership, a focus on storytelling, and changes in digital media, the traditional approach is losing its effectiveness.

To know more about Digital media visit:

https://brainly.com/question/30938219

#SPJ11

Answer:

12.6 s

Explanation:

y =  1/2 at^2

780.1 =  1/2 ( 9.81) t^2           answer can only have 3 s.d. due to the 9.81

t = 12.6 s

251 atm pressure is transmitted in the hydraulic system.

According to Pascal's principle,

P₂ = P₁

⇒ F₁/A₁                                                      ( ∵ pressure = force / area)

⇒ F₁ /πr₁²

r₁ = 0.500 m /2 = 0.250 m

An applied force of 100 N to the brake pedal acts in the cylinder through a lever. This will exert a force of 500 due to the lever of the hydraulic system.

Hence, P₂ =F₁/πr₁²

                = 500 N/ π (0.250 × 10⁻²)²

                = 2.55 × 10⁷ Pa

Convert the unit of the pressure from Pa to atm

P₂ = 2.55 × 10⁷ Pa ( 1 atm /1.01325  10⁵ Pa)

     = 251 atm

Hydraulic systems function and carry out duties thru the use of a fluid that is pressurized. every other manner to put this is the pressurized fluid that makes things paintings. The energy of liquid gasoline in hydraulics is massive and as a result, hydraulics are generally used in heavy devices.

Learn more about the hydraulic systems here:-https://brainly.com/question/1447013

#SPJ4

The velocity of the projectile just prior to the collision would be 167.31 m/s.

with respect to the Principle of Energy Conservation, we can write

U1 + K1 = U2 + K2

where U1 and U2 are the Initial and final gravitational potential energies.

and K1 and K2 are the Initial and final kinetic energies.

Putting all the appropriate values of the gravitational potential energy and kinetic energy, we get

(m+M)g (y2 - y1)  =  (1/2) x (m+M) x (\(V1^{2} - V2^{2}\))

or, g(y2-y1) = (1/2) x  (\(V1^{2} - V2^{2}\))

so , v1 we can write

v1 = \(\sqrt{v_{2} ^{2} + 2 * g * (y2-y1)}\)

v1 and v2 are the initial and final speed

Now, since the collision is inelastic collision, so we can write

where,

\(mv_{0p}\) is Velocity of the project prior to the collision, measured in meters per second.

\(Mv_{0B}\)  Velocity of the ballistic pendulum prior to the collision, measured in meters per second.

As we know that from quetion, v2 = 0 ; g = 9.8 , y2-y2 = 14cm = 0.14 m , m = 0.025 kg, M = 2.5kg and v0B = 0 ,

so putting all values

v1 = \(\sqrt{0^2 + 2 * 9.8 * 0.14}\)

v1 = 1.6565 m/s

again solving for \(v_{0p}\) ,

\(mv_{0p}\) =     \(= (m+M) v1 - Mv_{0B}\)

Vop  = 167.31 m/s

Hence the velocity of the projectile just prior to the collision is 167.31 m/s.

To learn more about collision, visit here

https://brainly.com/question/18762680

#SPJ4

Answer:

Question one is b, Question two is b, and question three is b, im pretty positive that what it is

[Fe(H20)6]3+ (low spin) will be paramagnetic. The answer is c.

[Fe(H20)6]3+ (low spin) has a d5 configuration, and the five d electrons are unpaired in the t2g orbitals. This means that [Fe(H20)6]3+ (low spin) has five unpaired electrons, and is therefore paramagnetic.

[Zn(H20)4]2+ has a d10 configuration, and all of the d electrons are paired. This means that [Zn(H20)4]2+ has no unpaired electrons, and is therefore diamagnetic.

[Co(H20)6]3+ (low spin) has a d6 configuration, and the six d electrons are paired in the t2g and eg orbitals. This means that [Co(H20)6]3+ (low spin) has no unpaired electrons, and is therefore diamagnetic.

[Fe(H20)6]2+ (low spin) has a d6 configuration, and the six d electrons are paired in the t2g and eg orbitals. This means that [Fe(H20)6]2+ (low spin) has no unpaired electrons, and is therefore diamagnetic.

To know more about paramagnetism, refer here:

https://brainly.com/question/29597588#

#SPJ11

The electric flux through the circular sheet is 0.70685 × 10⁶ nm²/c.

The electric flux through a circular sheet in a uniform electric field can be calculated using the formula

Φ = E×A, where Φ is the electric flux, E is the magnitude of the electric field, and A is the area of the circular sheet.

First, we need to calculate the area of the circular sheet using the formula A = πr², where r is the radius of the circular sheet. A = π×(3 m)² = 28.274 m²

Next, we can plug in the values for E and A into the formula for electric flux:

Φ = (2.5 × 10^4 n/c)x(28.274 m²) = 7.0685 × 10⁵ nm²/c

Finally, we can convert the units of the electric flux to 10⁶ nm²/c by dividing by 10⁶:

Φ = (7.0685 × 10⁵ nm²/c)/(10⁶) = 0.70685 × 10⁶ nm²/c

Therefore, the electric flux through the circular sheet is 0.70685 × 10⁶ nm²/c.

Learn more about electric flux at

https://brainly.com/question/30267804

#SPJ11

The wavelength of the wave of speed 35 m/s is 1.75 m.

Wavelength is the distance taken by a wave to cover one complete cycle.

To calculate the wavelength of the wave, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the wavelength of the  wave is 1.75 m.

Learn more about wavelength here: https://brainly.com/question/28995449

#SPJ1

Let k be the spring constant.

• When the spring is compressed by 11 cm = 0.11 m, it stores

1/2 k (0.11 m)²

of potential energy.

• When it's compressed by 66 cm = 0.66 m, it stores

1/2 k (0.66 m)²

of potential energy.

Then the ratio of these potential energies is

(1/2 k (0.66 m)²) / (1/2 k (0.11 m)²) = 36

which is to say, the spring stores 36 times more energy when it's compressed by 66 cm compared to 11 cm.

Answer:

a.200 Newtons

Explanation:

Given the following data;

Mass = 20kg

Acceleration = 10m/s²

To find the force;

Force is given by the multiplication of mass and acceleration.

Mathematically, Force is;

\( F = ma\)

Where;

F represents force.

m represents the mass of an object.

a represents acceleration.

Substituting into the equation, we have

\( Force = 20 * 10 \)

Force = 200 Newton.

Answer:

T try d add b CD c

Explanation:

Cdgffd

The answer is fossil fuel

Hope it helps!

The answer is fossil fuel

Answer:

t = 4.58 s

Explanation:

In this problem, we need to find the time elapse between seeing lightning and hearing the thunder if the lightning strikes 1mi (5280 ft) away and the air temperature is 90.0°F.

T = 90.0°F = 32.2 °C

The speed of sound at temperature T is given by :

v = (331.3 +0.6T)

Put T = 32.2°C

So,

v = (331.3 +0.6(32.2))

= 350.62 m/s

We have, distance, d = 1 mile = 1609.34

So,

\(t=\dfrac{d}{v}\\\\t=4.58\ s\)

So, the required time is equal to 4.58 seconds.