Which type of forming operation produces a higher quality surface finish, better mechanical properties, and closer dimensional control of the finished piece?A. Hot working.B. Cold working.

Answer:

Efficiency is defined as any performance that uses the fewest number of inputs to produce the greatest number of outputs. Simply put, you're efficient if you get more out of less.

Explanation:

The correct answer to this open question is the following.

The text structure of an article that discusses pharaohs and gives examples and explains how they look is a description.

The text structure called description allows the reader to fully know the characteristics of the people it is referring to, including some important details. That is why the author of a description text adds words like "such as" and "for example."

When describing something, the write is giving structure to the text and sequence. What comes first., what is followed, and so on.

That is why The text structure of an article that discusses pharaohs and gives examples and explains how they look is a description. It includes cause and effect sentences, and some comparisons in order to contrast an idea.

The true power is obtained as 70.7 VA.

We define the power a the rate of doing work, we know that the power in a circuit is the product of the current and the voltage. In this case, we want to find the true power thus we have to involve the use of the phase shift in degrees.

Thus;

True power = PcosΦ

P =  100 VA

Φ = 45 degrees

True power =  100 VA * cos 45 degrees

True power = 70.7 VA

Learn more about power in a circuit:https://brainly.com/question/2933971

#SPJ1

Explanation:

1. Verify the scope of work: Make sure you understand the scope of work and requirements for the customer's club instance. Confirm with the customer if any specific settings or customizations are required.

2. Schedule the PIC: Coordinate with the customer to schedule a suitable time and date for the PIC. Ensure that all necessary stakeholders are available and informed.

3. Review the customer's club instance: Review the customer's club instance to identify any potential issues or conflicts that need to be addressed during the PIC. Check the instance for any configuration, integration, or data issues.

4. Prepare for the PIC: Prepare a checklist and any necessary tools or documentation for the PIC. Make sure you have access to the customer's club instance, including any necessary login credentials or permissions.

5. Initiate the PIC: Once you have completed the above steps, initiate the PIC by going through the checklist and verifying that the customer's club instance is set up correctly and meets their requirements. Identify any issues or gaps that need to be addressed and work with the customer to resolve them.

6. Follow up: Once the PIC is complete, provide the customer with a report or summary of the findings. Follow up with any necessary actions or next steps, and confirm that the customer is satisfied with the results

List of all customers from Brazil along with their corresponding invoice details (if applicable). This information can be used for a variety of purposes, such as analyzing sales trends in Brazil or sending targeted marketing campaigns to Brazilian customers.

The customer information and invoice details for every customer whose country is Brazil, we can use a combination of the customer and invoice tables in our database. Specifically, we can join the two tables using the customer ID as a foreign key and then filter the results to only include customers whose country is Brazil.
To begin, we can use a SQL query that looks something like this:
SELECT customers.FirstName, customers.LastName, customers.Company, customers.City, customers.State, invoices.InvoiceId, invoices.Total
FROM customers
JOIN invoices ON customers.CustomerId = invoices.CustomerId
WHERE customers.Country = 'Brazil'
This query selects the first name, last name, company, city, and state fields from the customers table, as well as the invoice ID and total fields from the invoices table. The JOIN clause ensures that we only include customers who have an associated invoice, while the WHERE clause filters the results to only include customers from Brazil.
Once we run this query, we will have a list of all customers from Brazil along with their corresponding invoice details (if applicable). This information can be used for a variety of purposes, such as analyzing sales trends in Brazil or sending targeted marketing campaigns to Brazilian customers.

To learn more about Brazil .

https://brainly.com/question/15575147

#SPJ11

The output mass flow rate of the system can be determined using the law of conservation of mass.

According to the law of conservation of mass, the mass flow rate into the system must be equal to the mass flow rate out of the system. Therefore, we can equate the mass flow rate at the inlet (qi) to the mass flow rate at the outlet (qo).

Using the Bernoulli's equation, we can express the outlet mass flow rate (qo) in terms of the system variables:

qo = A * sqrt(2 * (P - P_pump) / P) * sqrt(2 * (h1 - h2 + R2 * qo^2 / A^2))

Simplifying this equation by assuming that the term R2 * qo^2 / A^2 is small compared to the other terms, we get:

qo = A * sqrt(2 * (P - P_pump) / P) * sqrt(2 * (h1 - h2))

Therefore, the output mass flow rate (qo) can be calculated as:

qo = A * sqrt(2 * (P - P_pump) / P) * sqrt(2 * (h1 - h2))

The output mass flow rate of the single-tank liquid level system is given by the equation qo = A * sqrt(2 * (P - P_pump) / P) * sqrt(2 * (h1 - h2)).

To know more about law of conservation visit:

https://brainly.com/question/20635180

#SPJ11

Answer:

2nd one

Explanation:

on edge 21

The option that identifies the engineer should choose the reverse engineering process in the following scenario is there will be changes to the existing product. The correct option is b.

The distinction between the reverse engineering process and the engineering design process is quite slight. The engineering design process is a method that requires months of planning and design in order to provide a blueprint for a specific project.

The fundamental skill of learning to make something by working backward from an existing inspiration for your project is called reverse engineering.

Three contrasts are that the engineering design process is based more on mental and written learning than it is on physical learning (unlike the reverse engineering process).

Therefore, the correct option is b, There will be changes to the existing product.

To learn more about reverse engineering, refer to the link:

https://brainly.com/question/10175918

#SPJ2

Answer:

if user_tickets == 7:

  award_points = 1

else:

  award_points = user_tickets

Explanation:

Not sure what language you are using. But this can be used for python. Also don't know if you are required to ask the user for any input

Given the indices stated above, the correct temperature distribution is: k1 = 2k2. See the definition of temperature distribution below.

The Solution to the linear heat flow equation is what is known as thermal distribution.

It measures heat transfer with respect to normal or natural phenomena such as:

Learn more about temperature distribution at:
https://brainly.com/question/15199818
#SPJ1

Answer:

identify function of the system unit and its components

Answer: Power

Explanation:

The rate at which work is done or the amount of work done based on a period of time is referred to as power.

Power can also be defined as the amount of energy that is being transferred per unit time. The unit of power is one joule per second or simply called the watt.

The social and economic cost of eating disorders in the United States of America is substantial, estimated to be billions of dollars annually.

Eating disorders have significant social and economic consequences, affecting individuals, families, healthcare systems, and society as a whole. To estimate the economic cost, various factors need to be considered, including healthcare expenses, productivity losses, and other indirect costs.

Healthcare expenses: Treatment for eating disorders often involves a range of medical, psychological, and nutritional interventions. The costs associated with hospitalizations, outpatient care, medications, therapy sessions, and specialized treatment programs contribute to the economic burden. These expenses can be substantial, considering the long-term nature of treatment and the potential for relapse. Additionally, eating disorders may lead to complications such as electrolyte imbalances, cardiovascular issues, and osteoporosis, further increasing healthcare costs.

Productivity losses: Eating disorders can significantly impact a person's ability to work or attend school. Individuals with eating disorders may require extended periods of medical leave, reduced work hours, or even complete withdrawal from employment or education. These productivity losses translate into economic costs not only for the affected individuals but also for employers and educational institutions.

Other indirect costs: Eating disorders have far-reaching effects on individuals' lives and society as a whole. These include the cost of research and development for effective prevention and treatment strategies, expenses related to advocacy, public education campaigns, and support services. Additionally, eating disorders can strain relationships, disrupt family dynamics, and lead to increased rates of divorce or separation, which have their own economic implications.

While it is challenging to quantify the exact economic impact, studies have estimated that the annual cost of eating disorders in the United States ranges from several billion dollars. These estimates encompass both direct healthcare expenses and indirect costs related to productivity losses and other societal factors.

The social and economic cost of eating disorders in the United States is significant. It encompasses healthcare expenses, productivity losses, and various indirect costs associated with the impact on individuals, families, and society. Recognizing the substantial burden that eating disorders impose, it is crucial to invest in prevention efforts, early intervention, accessible treatment options, and support services to mitigate the detrimental effects and improve the overall well-being of individuals affected by eating disorders.

To know more about economic cost follow the link:

https://brainly.com/question/31977790

#SPJ11

The social and economic cost of eating disorders in the United States of America is high and affects individuals, families, communities, and society as a whole. The prevalence of eating disorders is increasing and it is important to address the issue to reduce the impact it has on individuals and society.

The social and economic cost of eating disorders in the United States of America:

1. Eating disorders are associated with significant physical and mental health consequences. Individuals with eating disorders are at risk for a range of medical and psychological problems, including depression, anxiety, substance abuse.

2. Eating disorders have a significant impact on families, as they often require intensive medical care and treatment, which can be expensive and time-consuming.

3. Eating disorders also have a broader societal impact, as they are associated with reduced productivity, higher healthcare costs, and increased rates of disability and mortality.

4. Addressing the issue of eating disorders is important to reduce the burden it places on individuals and society as a whole. This can be done through prevention efforts, early intervention, and effective treatment.

To know more about economic cost refer to:

https://brainly.com/question/21711771

#SPJ11

2% glutaraldehyde is a disinfectant that is often used. preferred agent for semi-critical objects that can't be exposed to such adaptable fiberoptic sigmoidoscopy.

The small incision medical procedure known as a sigmoidoscopy examines the large intestine from the rectum to the sigmoid colon, which is the closest portion of the colon. There are two different forms of sigmoidoscopy: rigid sigmoidoscopy employs a rigid equipment while flexible sigmoidoscopy uses a flexible endoscope. The chosen procedure is usually flexible sigmoidoscopy. Although they are not the same, a colonoscopy and a sigmoidoscopy are related procedures. While a colonoscopy looks at the entire big bowel, a sigmoidoscopy just looks at the sigmoid, which is the farthest portion of the colon. The doctor can view the interior of the large intestine from the rectum to the sigmoid, or left side of the colon, using flexible sigmoidoscopy. The process can be used by doctors to identify the source of constipation, abdominal pain, or diarrhea. In the descending colon and rectum, they also utilize it to check for benign and malignant polyps as well as early indications of cancer. The doctor can see intestinal bleeding, inflammation, abnormal growths, and ulcers in the descending colon and rectum during flexible sigmoidoscopy.

Learn more about sigmoidoscopy here

https://brainly.com/question/29573794

#SPJ4

9514 1404 393

Answer:

  1

Explanation:

Only one such circle can be drawn. The diameter of the 10" circle will be a radius of the semicircle. In order for the 10" circle to be wholly contained, the flat side of the semicircle must be tangent to the 10" circle. There is only one position in the figure where that can happen. (see attached).

Answer:

c. Better online services and DBS services are capturing a portion of cable's business.

The rise of better online streaming services like Netflix, Amazon Prime Video, and Hulu, coupled with Direct Broadcast Satellite (DBS) services like Dish Network and DirecTV, has led to the decline of cable penetration in recent years. Better online services and DBS services are capturing a portion of cable's business. These services offer a wider variety of content and the flexibility to watch shows and movies on-demand, which cable providers have struggled to match. Additionally, the increasing availability of high-speed internet has made it easier for viewers to access streaming services without relying on cable. As a result, cable providers have lost a significant portion of their customer base to these competing services.

learn more about online services here:

https://brainly.com/question/29896912

#SPJ11

Answer:

channel width = 2.621 ft

Explanation:

Given data :

Decreasing Factor = 2

subcritical value = 0.4

super critical value = 2.5

width = 13 ft

attached below is a detailed solution and

The wind tunnel pressure required for model tests at 75 m/s is not provided in the paragraph.

The problem describes testing a drone in a wind tunnel to determine its drag at scale using dynamic similarity.

The groups necessary for dynamic similarity are determined by non-dimensionalizing the relevant parameters such as Reynolds number and Mach number.

Once the groups are determined, the wind tunnel pressure necessary for model tests at 75 m/s can be calculated.

Finally, the drag force of the prototype can be obtained by scaling up the measured model drag force using the scale factor and the known speed of the prototype.

Learn more about  wind tunnel pressure

brainly.com/question/29356688

#SPJ11

Answer:

Shut off cylinder valve before turning off forklift.

Explanation:

To reduce the pressure in the fuel line, the forklift operator should keep the engine running with the garage door closed and sealed.

In warehouses and on construction sites, a forklift driver is in charge of delivering, moving, loading, and unloading a range of commodities.

Always release the pressure in the LPG lines before disconnecting while filling LPG tanks. To accomplish this, shut off the tank valve and let the engine run until the lines are completely empty.

Before opening the valve on the new tank, shut off the engine and make sure the LPG tanks are fastened to the forklift.

Therefore, the forklift driver should keep the engine running with the garage door closed and sealed in order to lower the pressure in the fuel line.

To learn more about forklift operators, refer to the link:

https://brainly.com/question/3077792

#SPJ2

Answer:

Sarah is a professional interior designer.

Therefore, Sarah carries the title of a _registered___ interior designer.

Explanation:

Some states require only the licensed designers to carry out interior designs, while some others allow both the licensed and unlicensed interior designers to carry on the work of interior designers.  In the states where only the licensed designers are allowed to use the title of interior designer, they are registered after passing the state-prescribed examinations and meeting some professional experience requirements. The most common exam is the National Council for Interior Design Qualification (NCIDQ) examination, which only bachelor degree holders in interior design are allowed to sit for.

Answer:

if you encounter fishing or hunting boats while you are paddling, be courteous.

Give them a wide berth.

Never run overfishing lines. Be aware that anglers may have lines out to the sides of their boat or trolling behind them.

Explanation:

If the siding is fastened to the studs through the sheathing, the International Residential Code prescribes 3/8-inch plywood for sheathing walls with a typical stud spacing of 16 inches.

The minimum plywood thickness required by the IRC is 1/2 inch if the nails only go through the sheathing and not through the studs.

To know more about Sheathing please click here ; https://brainly.com/question/5029827

#SPJ1

The process of removing errors and inconsistencies from data is called data cleansing or data cleaning.

It involves identifying and correcting or removing inaccurate, incomplete, or irrelevant data from a dataset. Data cleansing aims to improve the quality and reliability of the data, ensuring that it is accurate, consistent, and suitable for analysis or further processing. This process typically involves various techniques such as data validation, deduplication, normalization, and outlier detection to identify and resolve errors or inconsistencies in the data. The ultimate goal of data cleansing is to enhance data integrity and reliability, enabling more accurate and meaningful insights to be derived from the data.

Know more about data cleansing here;

https://brainly.com/question/31561753

#SPJ11

Answer:

a) 4 hectómetros cuadrados equivalen a 400 decámetros cuadrados.

b) 21345 centímetros cuadrados equivalen a 2,135 metros cuadrados.

c) 0,592 kilómetros cuadrados equivalen a 592000 metros cuadrados.

d) 0,102 metros cuadrados equivalen a 1020 centímetros cuadrados.  

e) 23911 kilómetros cuadrados equivalen 2391100 hectómetros cuadrados.

Explanation:

a) 4 hectómetros cuadrados a decámetros cuadrados:

Según las unidades de área y sus escalas utilizadas por el Sistema Internacional de Pesos y Medidas, un hectómetro cuadrado equivale a 100 decámetros cuadradps. Entonces, obtenemos el dato equivalente por la siguiente regla de tres simple:

\(x = 4\,Hm^{2}\times\frac{100\,Dm^{2}}{1\,Hm^{2}}\)

\(x = 400\,Dm^{2}\)

4 hectómetros cuadrados equivalen a 400 decámetros cuadrados.

b) 21345 centímetros cuadrados a metros cuadrados:

Según las unidades de área y sus escalas utilizadas por el Sistema Internacional de Pesos y Medidas, un metro cuadrado equivale a 10000 centímetros cuadrados. Entonces, obtenemos el dato equivalente por la siguiente regla de tres simple:

\(x = 21345\,cm^{2}\times \frac{1\,m^{2}}{10000\,cm^{2}}\)

\(x = 2,135\,m^{2}\)

21345 centímetros cuadrados equivalen a 2,135 metros cuadrados.

c) 0,592 kilómetros cuadrados a metros cuadrados:

Según las unidades de área y sus escalas utilizadas por el Sistema Internacional de Pesos y Medidas, un kilómetro cuadrado equivale a 1000000 metros cuadrados. Entonces, obtenemos el dato equivalente por la siguiente regla de tres simple:

\(x = 0,592\,km^{2}\times \frac{1000000\,m^{2}}{1\,km^{2}}\)

\(x = 592000\,m^{2}\)

0,592 kilómetros cuadrados equivalen a 592000 metros cuadrados.

d) 0,102 metros cuadrados a centímetros cuadrados:

Según las unidades de área y sus escalas utilizadas por el Sistema Internacional de Pesos y Medidas, un metro cuadrado equivale a 10000 centímetros cuadrados. Entonces, obtenemos el dato equivalente por la siguiente regla de tres simple:

\(x = 0,102\,m^{2}\times \frac{10000\,cm^{2}}{1\,m^{2}}\)

\(x = 1020\,cm^{2}\)

0,102 metros cuadrados equivalen a 1020 centímetros cuadrados.

e) 23911 kilómetros cuadrados a hectómetros cuadrados:

Según las unidades de área y sus escalas utilizadas por el Sistema Internacional de Pesos y Medidas, un kilómetro cuadrado equivale a 100 hectómetros cuadrados. Entonces, obtenemos el dato equivalente por la siguiente regla de tres simple:

\(x = 23911\,km^{2}\times \frac{100\,Hm^{2}}{1\,km^{2}}\)

\(x = 2391100\,Hm^{2}\)

23911 kilómetros cuadrados equivalen 2391100 hectómetros cuadrados.

1. pH calculation after the addition of NaOH, pH = -log (0.0667) ≈ 1.18

2. pH calculation of the gastric juice sample, pH = -log(0.007) ≈ 2.15

To calculate the pH of the solution after the addition of NaOH, we need to consider the stoichiometry of the reaction between HCl and NaOH, as well as the volume of each solution used.

1. pH calculation after the addition of NaOH:

The initial moles of HCl can be calculated as follows:

moles of HCl = concentration of HCl * volume of HCl = 0.1 M * 100 mL = 0.01 moles

The moles of NaOH added can be calculated as follows:

moles of NaOH = concentration of NaOH * volume of NaOH = 0.1 M * 20 mL = 0.002 moles

Since the reaction between HCl and NaOH is 1:1, the remaining moles of HCl after the reaction is:

remaining moles of HCl = moles of HCl - moles of NaOH = 0.01 moles - 0.002 moles = 0.008 moles

To calculate the new concentration of HCl, we divide the remaining moles by the total volume of the solution:

new concentration of HCl = remaining moles of HCl / total volume of the solution = 0.008 moles / (100 mL + 20 mL) = 0.008 moles / 120 mL = 0.0667 M

Finally, we can calculate the pH of the solution using the formula:

pH = -log[H+]

pH = -log(0.0667) ≈ 1.18

2. pH calculation of the gastric juice sample:

The volume of NaOH used for titration is 0.7 mL, and its concentration is 0.1 M. Since the reaction between HCl and NaOH is 1:1, the moles of HCl in the gastric juice sample can be calculated as:

moles of HCl = moles of NaOH = concentration of NaOH * volume of NaOH = 0.1 M * 0.7 mL = 0.07 moles

To calculate the concentration of HCl in the gastric juice sample, divide the moles by the volume of the sample:

concentration of HCl = moles of HCl / volume of sample = 0.07 moles / 10 mL = 0.007 M

Finally, we can calculate the pH of the gastric juice sample using the formula:

pH = -log[H+]

pH = -log(0.007) ≈ 2.15

Learn more about pH calculations and acid-base titrations here:

brainly.com/question/30557641

#SPJ11

Answer:

building a bridge

Explanation:

you would have to sketch ideas to see what the bridge would look like and you need to know what to add to it to enhance the percentage of it working. if you sketch it you would have an idea of the process also

Building a bridge is an occasion in which an explanatory sketch would be used.

Sketches of explanations are created to demonstrate form, structure, and function. They accurately and objectively communicate a design, placing more emphasis on explanation than pitch. Outside of the design team, explanation sketches must be understandable.

Exploratory sketches, often referred to as thinking drawings, are a type of personal communication that frequently serve as the starting point for brand-new product concepts.

During a brainstorming session or for personal usage in a design notebook, these quick sketches are meant to quickly capture ideas. Exploratory research aims to study the important aspects of a topic that hasn't gotten much attention.

Thus, it is Building a bridge.

For more details about explanatory sketch, click here:

https://brainly.com/question/13673165

#SPJ2

b. 1,120 ft. MSL; visibility 1 sm.

According to the Federal Aviation Administration (FAA) Instrument Procedures Handbook, the minimum descent altitude (MDA) for a straight-in localizer/distance measuring equipment (LOC/DME) runway 21 approach at Portland International Airport in a category B airplane would be 1,120 feet above mean sea level (MSL). The visibility requirement for this approach would be 1 statute mile (SM). Therefore, the correct answer to your question is: b. 1,120 ft. MSL; visibility 1 sm.

It's important to note that the MDA and visibility requirements for an approach can vary depending on the specific approach being flown and the equipment available at the airport. It's also worth mentioning that the MDA and visibility requirements must be met to fly the approach. If the actual conditions at the airport are below these minimums, the approach cannot be flown, and the pilot must either execute a missed approach or proceed to an alternate airport.

The minimum descent altitude (MDA) is the lowest altitude that an aircraft is allowed to descend to during an instrument approach. It is typically expressed in feet above mean sea level (MSL) and is established to provide the pilot with an apparent visual reference of the approach path and the surrounding terrain. The MDA is determined based on the type of approach being flown and the equipment available at the airport.

The MDA is not a decision altitude (DA), which is the altitude at which the pilot must decide to either land or execute a missed approach. The DA is typically higher than the MDA and is based on the height of obstacles in the approach path. It's important to note that the MDA is a minimum altitude, and the pilot is not required to descend to the MDA unless it is safe to do so. If the pilot cannot see the runway or the required visual references at the MDA, a missed approach must be executed. In other words, the MDA is the minimum altitude that must be maintained during an instrument approach unless the pilot can see the runway or the required visual references, in which case the pilot may continue the approach and land.

Learn more about altitude here:

https://brainly.com/question/25550734

#SPJ4

Answer:

Borders, Dimensions Identified, Scale, Text Box with Date/Author/Title/Version Number

Explanation:

Technical drawings have many standards in order to maintain integrity and ensure that they can be used by engineers to produce what is mapped out in the drawing.

Every technical drawing needs to have borders and a text box with all information related to the drawing. This includes the date it was created, date it was updated, version number, title, and author.

Furthermore, each drawing should have necessary dimensions with a scale. At the same time, technical drawings should not be over-dimensioned or repetitive.

All of these things must be on a technical drawing to allow professional engineers to sign off on drawings.